^ this is a great tip, thanks Querk. I should have mentioned this. For me, specifically, not having a working drone is a problem because I want to keep cranking out vids, so I take the route that will fix it as fast as possible. But you can take your time and want to actually diagnose before spending money on a replacement part, this is exactly what you should do. Swap to motors and see if the problem follows the motor. If it does not, do the same thing with the ESCs and see if it follows ESC. etc...
Drew the Vlogs are on point mate, always look for them when I get on youtube, quite happy to wait for the flying ones. Good to see you guys over here :0)
Thanks a lot man , my wizard x220 was dipping on throttle punches so I’ll try replacing the motor. Now I just need to figure out why my quad failsafes whenever I use a stick at 100% (other than throttle) for example , full yaw left or right will failsafe the quad and needs to be disarmed then rearmed to fly again.
Just an idea, if you don't have any spare motors, just swap it with one of your other ones and see if the dip happens on the other arm. That should tell you whether or not it's the motor, if you don't want to order another motor only for it not to be the problem.
Dude, there's something about your flying that's different from everyone else I see, you fly organically. It's a pleasure to watch man, thanks for sharing.
Perfect personality to say the least..... No need to apologize man. Even on ur off days, when feeling crabby or what not keeps us interested. Keep up the good work.... ps.... I want my two dollars.
Steel is a smart man, smart people dont trust others initially its the curse of smart people they usually lack trust and friends, i rkn its because of hard childhood and or getting burned by girls and friends. sucks man. itl just take longer for drib and steel to get along. drib is super transparent seems like hes a standup trustworthy guy. but his overly friendlyness triggers smartpeople as suspicious
I agree with you 100% I have the same burden as Steele and that's why he inspires me so much because when he is in his element he blows everyone out the water!!
steele is right, There are others better than him, He is rightfully humble- he just shares more than some of the better pilots. but yeah boy can he fly- its insperational- so is dribs work-
I cant believe you were in Huntingdon Nandos! Thats right next to me! Would have loved to go flying with you guys! But I Get the feeling that this trip is not really about meeting up with community in Europe! There was nothing keeping us updated of were you're going? Just a shame and frustrating as this opportunity will never come round again.
oh we'll be back to England for sure. This trip did not allow for well planned meet-ups because we were figuring out how to proceed as we went with a limited budged. Though we did end up doing a meet up at the train station in london
Means alot to get a reply! yeah I understand completely :) I know it was impossible and impractical to meet everyone along the way just funny you went through my little town! Looking forward to seeing your video from Upwood its a great place! You guys did really well to make it all that way and I'm Looking forward to your return!
Ed Jones my name is dave and I live in Peterborough and have a small drone flying community going on over hear if your interested in with flying with others.
i would'nt poke those "dudes in red with tall hats" if i was you, as they have been known to hit people......hard!!, just youtube it!. happy travels boys. happy independence day for tomorrow. all the best mateys!
But what do you do if your quad dips on throttle pump? As in power delivery imperfect and antigravity cannot compensate enough to make it good? In this case, I would guess the motor windings or wires were somehow damaged.
ArmedMonkey it's definitely an ESC issue but you could swap out every ESC 5x and it'll still be there. this is a nuance issue but makes a huge difference if you're an experienced pilot looking for excellent performance.
Hey, i have a racing quad that turns on, connects to the controller an the motors seem to work but it just won't drive the motors or do anything, do you have any idea of what the problem might be.
Is there anything in the tune that can cause this mine is doing it on take off only like its glued the the ground then it takes off faster than expected. But after that it flys fine. I cant punch out from ground at all it will flip. I just replaced the motors with emax rsii 2206 2300kv and I also replaced my esc with hakrc 35a blheli_32 and still doin it. And I really cant afford a flight controller atm cause family medical issues and already spent alot about to give up amd just deal with it
That same happened to me today flying crashes in the cement by the engine thanks for the video I thought it was the ESC not the engine but now I know it was that
I got the protek 35 and just replaced 3 motors and it doesn't dip in acro but it does dip in horizon and angle mode, is that just a calibration or could it be the ESC?
I have one for you Drew, my quad hovers fine can fly around ok at low power but if I use to much throttle or punch out it flips and spins with not inputting any pitch or roll. I thought it might be a motor or a couple of them as they were cheap and old so replaced all of them to some Emax motors but the same issue. The esc's are bheli 30a which are fairly new and the FC is F4 is also fairly new. I used the motor tab and betaflight and did the maximum and minimum power quickly and the motors twitch everyone, I then did the same test using the master switch to do all at the same time and the same thing happened. The esc's have been calibrated. Does this mean all 4 motors are damaged? They are brand new or is it worth flashing the esc's and perhaps the board? Thanks in advance and I am loving your vlogs 👍🏻🇬🇧
Since i just got my first MQC frame i would like to know what you broke and had shipped. Got both 5" and 6" aliens and never broken yet. Should i be concerned?
I had some missing screws I didn't notice so it was weaker and I broke a top plate. No need for concern. It's very durable and if you do break its warrantied
Those for whom this trick didn’t work and is still leaning to one side, all you have to remove this case and take the motor out slowly(the side which had less power and was not taking off from ground) and remove the gear put some glue on the shaft and put it back in. Assemble back and try! Should work if it was caused due to strikes while flying… thanks
Love your videos man I watch them all and you inspire me to make my own vlog style content. I think you should do a video of how you made your own portable soldering Iron.
I would add one step before even replacing the motor. Tear it down, clean it with some motor spray, and hit the bearings with some bearing oil. I've had a quad in the past that was doing this and it was just some debris in the motor or bearing causing it to not spin well. Might save you from binning a good motor. PS, how are you and Steele doing with your $500 spending money?
Just be YOU. enjoy the trip, share some but not all. Take the moment as it is, evolve from an awesome pilot to an legend :) If your subscribers like you from start WE WILL STAY.... so chill, enjoy the trip and have a blast. (sad tho that you won't come to Sweden :( :P .... )
Word!!!!! Drew!!!! What's up man. That green ire-land vid you posted the other day was the bomb.com I thought I saw a fucking leprechaun! Lol keep it going my man. Enjoying the journey!
drew, what if i go really high and put my throttle to 0% and when the quad is falling flat, it dips to the back left? i have been having this problem on my racing quad for a while, the cg is properly balanced too. And it doesn't dip when i give it any throttle, it only happens when i let go of the throttle stick (0% throttle) any ideas?
I was having this same prob so I change to better motots and escs it fixed the prob on lunch out but it dips so hard it almost flips forward after I drop the throttle in punch out and I have airmode on.
the drone s89 is not flying, so i want to do factory reset but the drone is not resetting. I pressed the throttle lever and the directional lever at the same time which I angled to the button right corner but the drone is not factory resting. Pls any help!!!
Ok it took me a while to find some time but I have fixed the problem! Using your strategy I figured out it was one of the esc's (I swapped the motors that were on it because I didnt have new motors). Now the esc itself had not even a single scratch so I did some blackbox exploring and saw that it reached 100% throttle (WOT) way before the others. I reflashed all of them and recalibrated them and that fixed it. I don't know how the problem came to be in a crash but I guess the calibration did the trick. Thanks for the quick tip! I really appreciate these 'real world repairs'.
Awesome Vlog bro! I have a kwad I need to diagnose but just haven't the time. oh how nice it would be if it was just a motor. crossing fingers! Don't worry about no flying clips in your videos, your vlogs are just as entertaining to watch as your flight vids, I love how u guys just f*** around. makes for an entertaining time. I'll be hitting you and Steele up for a colab soon!
My left corner dips when I throttle up..I landed lightly afterwards then the ESC cought on fire..I replaced the ESC and even new motor still dipping or even one motor won't come on I mean it does but when ever it feels like it..I also checked all the solder and it's all fine I don't get what's going on..please help it's really aggravating
thanks! Going daily has been a long time aspiration of mind. I've almost pulled it off on the euro trip. Filmed every day but got a bit behind on publishing.
Le Drib just make sure you don't get too caught up trying for the perfect edit, enjoy yourself man! A trip like this is a definite once in a lifetime =)
Drew, it is So very enjoyable to vhang with you .. you have a natural talent for "vhosting" .. i am always looking forward to the next time of checkn out whats zup wit Drew...
i got the same problem whit 1 brand new hypetrain VANOVER engine and its folowed the engine wear i movd it to esc i know was working find newer ben in the air.
why are you always changing Motors so often? I've been flying for over a year and never crashed and damage the motor. I obviously use those little plastic motor protectors or TPU protectors I'm wondering why you don't? Do you get your motors for free?
I do not get my motors for free. I might try motor protectors, I never thought they would add much real protection but I've been going through motors pretty fast lately, might be good to try something else
Soooo.. any idea what the actual problem is with the motor? I have motors that are a couple weeks old and seem to already dip on one side. Why would new motors dip. No way to solve it without a new motor? These are new motors lol. pls someone
Smh! Really.. I just had that problem last week.. I would fly for about 2 mins and then it would dip on me... Very randomly not on every battery... I worked from in to out Smh.. Well it gave me a reason to change flight controller... Enjoy the trip... Next time I will start from the outside.
it was pretty good, but certainly not as good as what you find in Detroit's Mexican Town ;) Cant blame the brits though, Mexico is pretty far. I mean we got popcorn when we sat down instead of chips and salsa. That was funny
if you don't have spare motor, you can switch the problemed corner's motor with a functional one and see if the problem follows the motor.
^ this is a great tip, thanks Querk. I should have mentioned this. For me, specifically, not having a working drone is a problem because I want to keep cranking out vids, so I take the route that will fix it as fast as possible. But you can take your time and want to actually diagnose before spending money on a replacement part, this is exactly what you should do. Swap to motors and see if the problem follows the motor. If it does not, do the same thing with the ESCs and see if it follows ESC. etc...
Don’t do that, I fucked up two quads doing that
Awesome skill man! The precision with which you do this is insane, can you please post a tutorial on how you apply your eyeliner with such accuracy?
lmao this cracked me up so good
Drew the Vlogs are on point mate, always look for them when I get on youtube, quite happy to wait for the flying ones. Good to see you guys over here :0)
:)
Thanks a lot man , my wizard x220 was dipping on throttle punches so I’ll try replacing the motor. Now I just need to figure out why my quad failsafes whenever I use a stick at 100% (other than throttle) for example , full yaw left or right will failsafe the quad and needs to be disarmed then rearmed to fly again.
Just an idea, if you don't have any spare motors, just swap it with one of your other ones and see if the dip happens on the other arm. That should tell you whether or not it's the motor, if you don't want to order another motor only for it not to be the problem.
Fuzzwad Or always order 5 motors and 5 escs from the start ;) , that way no matter what it is you always have a spare
making a pentacopter?? No I'm just planning to crash
Dude, there's something about your flying that's different from everyone else I see, you fly organically. It's a pleasure to watch man, thanks for sharing.
Well, that's twice this week that you and the Krew have helped me diagnose issues. Thanks as always!
Lmao , Steele at :30 has me freaking rolling. 😂
When checking motors check screw lengths when changing motor. Touching winding can cause that dipping- did on my first quad anyway.
Perfect personality to say the least..... No need to apologize man. Even on ur off days, when feeling crabby or what not keeps us interested. Keep up the good work....
ps.... I want my two dollars.
Seems like Drib and Steele don't really gel!
Steel is a smart man, smart people dont trust others initially its the curse of smart people they usually lack trust and friends, i rkn its because of hard childhood and or getting burned by girls and friends. sucks man. itl just take longer for drib and steel to get along. drib is super transparent seems like hes a standup trustworthy guy. but his overly friendlyness triggers smartpeople as suspicious
I agree with you 100%
I have the same burden as Steele and that's why he inspires me so much because when he is in his element he blows everyone out the water!!
steele is right, There are others better than him, He is rightfully humble- he just shares more than some of the better pilots.
but yeah boy can he fly- its insperational- so is dribs work-
"Smart man" lmao. Let's not forget who the engineer is. Steele is just a try-hard dude who happens to be reserved. Drib is the smart one here.
Chris who can gel with a feminine man with eyeliner
I cant believe you were in Huntingdon Nandos! Thats right next to me! Would have loved to go flying with you guys! But I Get the feeling that this trip is not really about meeting up with community in Europe! There was nothing keeping us updated of were you're going? Just a shame and frustrating as this opportunity will never come round again.
They're using their facebook group for updates and meeting people.
Well that's not true , I'm on rotor riot and their pages and I saw nothing? Only Steele posted an Instagram later in the evening after they left?
oh we'll be back to England for sure. This trip did not allow for well planned meet-ups because we were figuring out how to proceed as we went with a limited budged. Though we did end up doing a meet up at the train station in london
Means alot to get a reply! yeah I understand completely :) I know it was impossible and impractical to meet everyone along the way just funny you went through my little town! Looking forward to seeing your video from Upwood its a great place! You guys did really well to make it all that way and I'm Looking forward to your return!
Ed Jones my name is dave and I live in Peterborough and have a small drone flying community going on over hear if your interested in with flying with others.
i would'nt poke those "dudes in red with tall hats" if i was you, as they have been known to hit people......hard!!, just youtube it!. happy travels boys. happy independence day for tomorrow. all the best mateys!
I've seen those vids. They tolerate a bit of shit but don't get to close or touch them. They will fuck you up. lol
Russell Reilly , yep they certainly will!!lol!, after all, they're not just for show, they're fully trainned british army!. all the best matey.
Yep, The Queens guard. In todays age of terrorism a couple of guys with drones will probably get shot on sight. lol
But what do you do if your quad dips on throttle pump? As in power delivery imperfect and antigravity cannot compensate enough to make it good? In this case, I would guess the motor windings or wires were somehow damaged.
ArmedMonkey it's definitely an ESC issue but you could swap out every ESC 5x and it'll still be there. this is a nuance issue but makes a huge difference if you're an experienced pilot looking for excellent performance.
Ha! Just a few minutes ago ( I kid you not) I was wondering when Drib and Steele would upload 😂👏
Lazudi FPV same
Hey, i have a racing quad that turns on, connects to the controller an the motors seem to work but it just won't drive the motors or do anything, do you have any idea of what the problem might be.
Is there anything in the tune that can cause this mine is doing it on take off only like its glued the the ground then it takes off faster than expected. But after that it flys fine. I cant punch out from ground at all it will flip. I just replaced the motors with emax rsii 2206 2300kv and I also replaced my esc with hakrc 35a blheli_32 and still doin it. And I really cant afford a flight controller atm cause family medical issues and already spent alot about to give up amd just deal with it
That same happened to me today flying crashes in the cement by the engine thanks for the video I thought it was the ESC not the engine but now I know it was that
I got the protek 35 and just replaced 3 motors and it doesn't dip in acro but it does dip in horizon and angle mode, is that just a calibration or could it be the ESC?
Do you end up tossing that motor or can they be repaired later on and kept as spares?
Nice work again! The vlogs are great, the flying just extra. Keep up the work! also those coronas haha.
I have one for you Drew, my quad hovers fine can fly around ok at low power but if I use to much throttle or punch out it flips and spins with not inputting any pitch or roll. I thought it might be a motor or a couple of them as they were cheap and old so replaced all of them to some Emax motors but the same issue. The esc's are bheli 30a which are fairly new and the FC is F4 is also fairly new. I used the motor tab and betaflight and did the maximum and minimum power quickly and the motors twitch everyone, I then did the same test using the master switch to do all at the same time and the same thing happened. The esc's have been calibrated. Does this mean all 4 motors are damaged? They are brand new or is it worth flashing the esc's and perhaps the board? Thanks in advance and I am loving your vlogs 👍🏻🇬🇧
Jamie Grigor you try changing the motor timing in BL heli? I had a set that did that and went to medium low timing and it fixed it.
Since i just got my first MQC frame i would like to know what you broke and had shipped. Got both 5" and 6" aliens and never broken yet. Should i be concerned?
I had some missing screws I didn't notice so it was weaker and I broke a top plate. No need for concern. It's very durable and if you do break its warrantied
Those for whom this trick didn’t work and is still leaning to one side, all you have to remove this case and take the motor out slowly(the side which had less power and was not taking off from ground) and remove the gear put some glue on the shaft and put it back in. Assemble back and try! Should work if it was caused due to strikes while flying… thanks
Kinda funny today I had the exact issue today . Keep doin what your doing Drew , with love!
did you end p getting it fixed?
Le Drib sure did..in my case. cold soldered esc...:-)
That can make it dip like that? Is it bc it isn't getting the power as fast as the rest??
Love your videos man I watch them all and you inspire me to make my own vlog style content. I think you should do a video of how you made your own portable soldering Iron.
I would add one step before even replacing the motor. Tear it down, clean it with some motor spray, and hit the bearings with some bearing oil. I've had a quad in the past that was doing this and it was just some debris in the motor or bearing causing it to not spin well. Might save you from binning a good motor. PS, how are you and Steele doing with your $500 spending money?
solid tip.
we definitely struggled with the budget lol
for me it was a bad/loud propeller. replaced it with a balanced one and it fix this same issue.
What battery are you using for the portable iron?
Just be YOU. enjoy the trip, share some but not all. Take the moment as it is, evolve from an awesome pilot to an legend :) If your subscribers like you from start WE WILL STAY.... so chill, enjoy the trip and have a blast. (sad tho that you won't come to Sweden :( :P .... )
Thanks for sharing the journey. I can't wait to see the flight footage!
:)
where to get those landing pads you have on your drone, that protect the motor mounting screws ????
I see you recovered well from that rip drib accident
Awesome man... love the videos, even without any flying...
LOL Mr Steele scowling @ 0:28 🤣
Can i use any motor im new to drones and one corner doesnt spin and i dont have a spare motor so could i buy a new motor? That is similar ofc
Word!!!!! Drew!!!! What's up man. That green ire-land vid you posted the other day was the bomb.com I thought I saw a fucking leprechaun! Lol keep it going my man. Enjoying the journey!
haha thanks! ☘️
drew, what if i go really high and put my throttle to 0% and when the quad is falling flat, it dips to the back left? i have been having this problem on my racing quad for a while, the cg is properly balanced too. And it doesn't dip when i give it any throttle, it only happens when i let go of the throttle stick (0% throttle) any ideas?
Inteous FPV esc mine did that and it was esc
ah
honestly first check if your props are connected tightly to your motor, for me tightening the prop nut fixes 90% of the dipping corners
I can't believe you guys are doing this many videos and working for RR at the same time
I was having this same prob so I change to better motots and escs it fixed the prob on lunch out but it dips so hard it almost flips forward after I drop the throttle in punch out and I have airmode on.
Perfect timing on the "dipping arm" issue. Hope mine's as easy to fix as yours was 🤞🏻
did you get it fixed??
Where did you get that soldering iron?
Excellent video, Motor Mount Landing Pad stl?
I can't find the link now but there are lots of options on thingiverse :)
the adventure continues! it's a road trip so don't worry too much about the lack of flying just yet... don't fake us out with no flying!
Remember them to regularly lick their lenses... :-)
What are those covers you got under each arm under the motors? I’d love to get those
the drone s89 is not flying, so i want to do factory reset but the drone is not resetting. I pressed the throttle lever and the directional lever at the same time which I angled to the button right corner but the drone is not factory resting. Pls any help!!!
Literally today I ran into dipping corners. Timing and Thank you. Ill see if I can get it fixed ;)
Let me know what you find! :)
Ok it took me a while to find some time but I have fixed the problem! Using your strategy I figured out it was one of the esc's (I swapped the motors that were on it because I didnt have new motors). Now the esc itself had not even a single scratch so I did some blackbox exploring and saw that it reached 100% throttle (WOT) way before the others. I reflashed all of them and recalibrated them and that fixed it. I don't know how the problem came to be in a crash but I guess the calibration did the trick. Thanks for the quick tip! I really appreciate these 'real world repairs'.
hi
i like your soldering iron - can you give me an idea on how its hooked up to your battery
thanks for the tip
many thanks
theres a link to the soldering iron in the video description, its a TS100, such a useful gadget
lol drib just spinning in circles in that parking lot talking to himself.. the world is going full assburgers LETS DO IT!!!
Great vid wish I knew u was over here as that castle was not far from me would be awesome to fly with u guys
Great info. Now I have to start buying extra gear. Motors, props ect.
Awesome Vlog bro! I have a kwad I need to diagnose but just haven't the time. oh how nice it would be if it was just a motor. crossing fingers! Don't worry about no flying clips in your videos, your vlogs are just as entertaining to watch as your flight vids, I love how u guys just f*** around. makes for an entertaining time. I'll be hitting you and Steele up for a colab soon!
hope the motor swap fixes it, let me know
Le Drib Thanks I will. I'm going to take a stab at it tonight!
I have replaced the motor, and the ESCs, so does that mean it’s my flight controller that’s causing the Desync
My left corner dips when I throttle up..I landed lightly afterwards then the ESC cought on fire..I replaced the ESC and even new motor still dipping or even one motor won't come on I mean it does but when ever it feels like it..I also checked all the solder and it's all fine I don't get what's going on..please help it's really aggravating
I love seeing the ongoing adventure =)
:)
Grande le Drib. Mi piace molto quello che fai. salutami ms. Steele ciao a tutti voi
My quad dips when I try to make a sharp turn. Do I have a problem with my FC, ESC or motor?
Fc
*Please be aware:
Your new motors or escs might get damaged after u solder it to the damaged esc/motor
cool locations, shame weather sucks in UK " as usual " kind of depressing weather but hey that nice green grass needs water to survive :)
Loving the daily vlogs, keep it up!
thanks! Going daily has been a long time aspiration of mind. I've almost pulled it off on the euro trip. Filmed every day but got a bit behind on publishing.
Le Drib just make sure you don't get too caught up trying for the perfect edit, enjoy yourself man! A trip like this is a definite once in a lifetime =)
can you mix and match motor brands, (stator size and kv rating staying the same) ?
I wouldn't recommend it. There will be variance between manufacturers. It will fly though and probably be fine, just best to have them all match.
I would recommend just checking motor connections first, could be that and saves buying a new motor
So from 00:42 to 2:39 was the troubleshooting??
Jae you've been such an awesome chaperone 👍
Jae is the @#%&ing man! Such an amazing host :)
who planned your itinerary? you seem to be going to some random places!
there is no itinerary! Get from Dublin to Rome in 12 days! Thats all we know :)
Drew, it is So very enjoyable to vhang with you .. you have a natural talent for "vhosting" .. i am always looking forward to the next time of checkn out whats zup wit Drew...
Good vidéo man. I love your flight
Great video, thank you drew!
where can i get one of those battery operated soldering irons that is pretty nice
theres a link in my description, its a TS100. Super handy!
What are all of those red tube looking things at about 6:48?
When I push the controller to start flying ,the drone just fly at his 100% power even when im pushing at 50% power ,and 2 corners doesn't work!
I'm having a problem like this. But it's because my ground wire to my esc came off after a 70 foot upside-down fall.
70ft crashes can cause some problems haha
i got the same problem whit 1 brand new hypetrain VANOVER engine and its folowed the engine wear i movd it to esc i know was working find newer ben in the air.
What if your quad turns instead of dipping?
good morning guys.... have a happy 4th
nice vid guys too much fun
in my case it was an esc....lol great video thanks drew
why are you always changing Motors so often? I've been flying for over a year and never crashed and damage the motor. I obviously use those little plastic motor protectors or TPU protectors I'm wondering why you don't? Do you get your motors for free?
I do not get my motors for free. I might try motor protectors, I never thought they would add much real protection but I've been going through motors pretty fast lately, might be good to try something else
it can be a tuning issue as well
loving it
Mr. Steele in the background looking like Steve Buscemi.
Hello brother I replace my drone motors but still it is not flying please advice me I'm from India
Drib and Steel make a good pair.
You need to leave visual links to your flight video on rotor riot. I always thought your flight videos were very fluent
Have a720e holy stone just out of box ,just flys out of control ,did all the proper calabrateing
No apologies needed, we love you!
:)
where's the airfield? I'm from the UK :)
Soooo.. any idea what the actual problem is with the motor? I have motors that are a couple weeks old and seem to already dip on one side. Why would new motors dip. No way to solve it without a new motor? These are new motors lol. pls someone
Next time switch your camera to 25 or 50fps to get rid of that annoying flicker. OK thx bye. Great vlog 😎✌️
Smh! Really.. I just had that problem last week.. I would fly for about 2 mins and then it would dip on me... Very randomly not on every battery... I worked from in to out Smh.. Well it gave me a reason to change flight controller... Enjoy the trip... Next time I will start from the outside.
did it fix when you changed the FC or did you have to change to ESC and motor as well?
Le Drib No the FC swap did not fix it. So I swapped the motor and boom she is alive again. Guess I actually did the sandwich method..
We can reverse the 2 propellers.
Good tips and footage man
thanks :)
If it is the FC then beta flight will let you remap the motor outputs. It's saved my ass a couple times
good tip!
Great video drew! Keep it up! :D
what antenna is that?
Heyoo Drew!! How it going?!
Awesome Drew 👍👊
Thanks so much it help
That was one big burrito, did you get it to all fit, and how good was it? lol
it was pretty good, but certainly not as good as what you find in Detroit's Mexican Town ;)
Cant blame the brits though, Mexico is pretty far. I mean we got popcorn when we sat down instead of chips and salsa. That was funny
Le Drib Popcorn? lmao.