I have 4 of these, the only down side is low ceilings, light does not spread out from the sides you will definitly see the difference. I wish the halo had white lites as well.
After switching to the new M3 hub, I couldn't re-bind the T1M. The T1M Light says turn the light on/off 5 times. I wasn't thinking to do it RAPIDLY. That was my issue. This might help someone else.
I too agree that the T1M light is fantastic. A simple bit of advice for someone that wants to install the light themselves. When you take down your old fixture, you will see 2 wires hooked to it. Here it is a black & white wire, over "there" it would be brown and blue. There is usually a ground wire that's green or just copper also. The only and main suggestion is that you DO NOT!!! place both wires on your tongue to see if the power is off.
@@scottpinhorne I should have added , as I see in your fixture box there were a number of others wires and connections. They are going to the switch and to other fixtures or switches and should be ignored.
First of all thanks a lot for this video . I’m just new on Smart home and now I’m planing for smart wall switch but not expensive one as I need on total around 20 wall switches, any advise ?
I have 4 of these, the only down side is low ceilings, light does not spread out from the sides you will definitly see the difference. I wish the halo had white lites as well.
A great presentation, cheers mate!!
After switching to the new M3 hub, I couldn't re-bind the T1M. The T1M Light says turn the light on/off 5 times. I wasn't thinking to do it RAPIDLY. That was my issue. This might help someone else.
If i install 3 of these lights, how many hubs would i need? Or is one hub good enough to handle all three lights?
@@MM-ob8ti I currently have 4 all on the same same hub :-)
I too agree that the T1M light is fantastic. A simple bit of advice for someone that wants to install the light themselves. When you take down your old fixture, you will see 2 wires hooked to it. Here it is a black & white wire, over "there" it would be brown and blue. There is usually a ground wire that's green or just copper also. The only and main suggestion is that you DO NOT!!! place both wires on your tongue to see if the power is off.
Hi, yes it’s blue and brown here. We also have an earth/ground cable too :-)
@@scottpinhorne I should have added , as I see in your fixture box there were a number of others wires and connections. They are going to the switch and to other fixtures or switches and should be ignored.
@@myutube6422 they were labelled as loop wires :-)
Unless you have plenty of money, go to utube and educate yourself on electricity so you are comfortable working on little stuff.
You'er the first one mentioning the Zigbee Mesh repeater.
First of all thanks a lot for this video .
I’m just new on Smart home and now I’m planing for smart wall switch but not expensive one as I need on total around 20 wall switches, any advise ?
The Aqara one is £35. I haven’t used any myself yet as I’m scared I’d kill myself lol
@@scottpinhorne SONOFF SwitchMan Smart Wall Switch-M5 Matter (White)
$17.99 - $22.49 ? What you think 🤔
THE PRICE IS CRAZY..FOR CHINESE LED LAMP THAT HAVE 1 METER OF LED STRIP TO PAY 120 EUROS!