How To Balance Electric Scooter Tires
ฝัง
- เผยแพร่เมื่อ 27 ก.ค. 2022
- Are your scooter tires wobbly? Check out this tutorial on how to balance your tire for smoother, faster riding! Example scooter is NAMI Burn-E 2 Max
🚨🚨Subscribe to the main Electric Scooter Guide Channel to watch full scooter reviews! ➡️ / electricscooterguide1915
👀SEE scooter in the video
🛴 NAMI BURN-E 2: geni.us/BurnE2?track=ytec ("ESGBURNE2" for $100 off)
Wheel Weights (5 grams): www.amazon.com/Supply-Steel-S...
Less expensive 7gram weights: www.amazon.com/CKAuto-Adhesiv...
Scooter Lift used in video: www.amazon.com/gp/product/B06...
MORE
📸 Instagram: / electric_scooter_guide
💬 Facebook Group: / electricscooterguide
🌐 Website: electric-scooter.guide/
#NamiBurn-E2 #electricscooter #tirebalance
Yesssss! I’ve done this months ago when I got my Vsett10+ to fix the vibrations. Wished more people new about this. I previously worked on cars before so this makes perfect sense. Well done for this tutorial! Thanks!
Thank you! :-) -Paul
I have a obarter x5 wheels are out of balance, how do you know where to put the weights?
I have a Vsett 10 and my back tire has a wobble and I massaged tire many times. How many grams did you use?
Always love their updates and videos
I just balanced both the front and rear wheels on my Apollo Phantom V2-V3 and it made a world of difference... and... although I was skeptical when you stated that I might gain speed, I did... an entire 1 mph... LOL. But it was an increase. I actually disconnected one motor at a time and balanced each wheel separately. It did not run as smooth on the stand as the Nami in the video, but on the road... Wow! Thank you.
yes that is correct approach, always balance in single motor first, after that motor is balanced than you move to balancing in the dual motor mode
Your video really helped me to figure out a way to balance my E bike wheels on my Enduro E bike. Thank you.
Fantastic advice!!!! Everyone should do this!
Thanks Cory! -Paul
great one sir! gonna balance my wheels soon too! very handy!
great tip, I always balanced my RC tires so know how much difference even a very basic balancing can make (more comfort due to less vibrations, less stress on the motor, more power being put down)
even balanced my standing room fan recently that was shaking a lot due to the plastic blade part not being balanced or centerd....after some very basic balancing on a rc prop balancer with some putty it no longer shakes
Hey, look what I discover, a new channel about e-scooter :D
Good to see you on the new channel as well as the main one! More good things to come! -Paul
Thank you Paul!! This will make my mantis king gt even more awesome
So happy I could help! -Paul
Thank you so much for this!
Anytime! Thanks for watching. -Vosk
great video, getting some balance beads works perfectly for whenever you can get the tire off
Thanks for sharing Pauly 😊😁👍
Thanks William! Good to see you on the new channel! More good things to come! -Paul
Never thought about doing that on an electric kick scooter but it makes good sense.
Thanks for watching! Stay Safe
Thank you, perfect video
You're welcome!
Did this today to my Kaabo Mantis 10 V2 Dual Motor. Reduced vibration a good bit. Used duct tape to secure extra. Feels a lot smoother and linear.
I cannot thank you enough🙏, fixed my fluid vista instantly! Was worried I broke it 😂. I need to do it to the front tire but there's no motor in the front so it'll take a bit more time to trial and error it. Now I can go over 23 mph without vibrating!
Non driven wheels are easier!
Put it in the air with the brakes loose or removed. See if the heavy part will find the bottom on its own. If it will you’re in luck. Mark the top, that’s the light part. ADd a weight where the mark is, then turn the mark until it’s sideways (3 o’clock). See if the mark moves up (needs more weight) or down (needs less weight).
This is static balancing and is how the tires on my motorcycle were balanced for racing! -Paul
Thanks for the tutorial! I knew my wheels were slightly out of balance but I wasn't sure how to go about placing the weights in the correct place.
Awesome! Glad to be a help. -Vosk
very informative!
Thanks RC N Stuff! -Paul
Thank you very much sir
Yes great advice!
Thanks @MericaDude! -Paul
Very cool info!
Glad you think so!
Top video. I’ve just bought a brand new scooter and my rear wheel has some serious vibration. The front is top notch. I’ve checked it over and there are a few issues. Nothing I didn’t expect really. There’s a yellow label one the stem. It says warning! Then lots of writing then most important made in China. 😂
Thanks for watching! Stay safe.
This is helpful
So glad to hear it @Joseph Balingit! -Paul
Hey Pual thank you for your amazing experience and knowledge that you share with us mere earthlinks down here. lol
You mention reseating the beads, my scooters front tire is out of balnce because I had got a flat and had to take off everything. So I retook of the tire and I am trying to reseat eveything again. I don't think I have that prominent line that goes around the tire on my wheel per se, there is one but I am unsure if thats it. The one that I do have goes halfway around the tire but the line stops and goes into a name. I was wondering if you ever made the other video talking about this specific setup so I can make sure I a not missing any steps that could help me. Thanks In Advance.
I used to balance the props on my drone propellers and don't know why I never thought to do this on my scooter. Although my nanrobot d6 is very smooth I'm sure it's out of balance. Thank you for this video 👍
Awesome! Thanks for watching. -Vosk
Subbed!💪❤️
Thank you Daniel! you're subscriber #80 for our "Extras" channel! :-) Next stop 80,000 -Paul
I definitely need to do this with my scooter. I changed tires last winter to off road tires and it’s never been that smooth at high speed since
Let us know how it goes! Check to see that the bead is fully seated too! -Paul
offroad tires handle kinda bad, loved em till i tried semi offroad & road tires, i'll never use offroads again
Really nice ..
Thank you @PHEAK SOK! -Paul
Awesome!!!
Thank you Gi Rides! -Paul
I might try this with my EUC though I would have to lift and hold it every time.
Thx Paul you saved much headache. Sadly most of these China tires are out of round to begin with, I've tried resetting the bead with soapy water many times on several scooters, it only helps slightly... they are just poorly manufactured with marginal QA. So BEFORE you purchase a sled capable of 75km/hr ask for a 'wheel balance' !! They know it's a huge pita, and won't do it unless you ask... as part of your purchase agreement.
First try this tip, deflate completely your tire, spin the wheel a bit by hand put only 10 psi and engage the motors while scooter on a bench, works best with dual motors make the tire spin. Then inflate to the correct tire pressure. Often it's the inner tube that cause imbalance so by doing this you will evenly set the inner tube. You may also add balancing beads inside your inner tubes.
These are tubeless tires.
Thanks for the feedback! -Vosk
Love it
Thanks @Johndel Fajardo! -Paul
this is so important...i had big trouble with the original 10'' kugoo wheels,but i installed 11'' CST and it is like a better scooter...i need to do this to my rear wheel because i am sure the line is perfect..when i change these awful tires (rims) i look for it to fit good,but the balancing is needed...i think my rim is not perfect because i bought this scooter second hand,but i will see if this balancing will make it OK...thanks for the video
Thanks for sharing!
@rezzy851 Which kugoo scooter do you have? Could u please send a link to both tires and inner tubes? These 10”s from kugoo are so terrible im tired of trying to get them sat properly.
Duct tape: in drag racing we call it “200 mph tape” lol I’ve seen fiberglass bodies on f/c held together with this stuff
Awesome video Paul, thanks ESG! My Phantom V2 has serious wobbles above 60km/hr. I have re-seated the tyres and I've had it back to the local supplier here in Australia for warranty repairs, all to no avail. I have ordered the weights 💪 can't wait to give it a go!
Any luck?
@RupakShakur yes. Not perfect yet but eliminated wobbles in rear wheel, front wheel is improved, likely the tire is not perfectly round. I'm not going to change it until I get a puncture as I am OK with how it rides. Definitely worth the effort.
Great video thnx, but just wondering, is it not better to start all over on the other side? Like car tyres, when balancing, it almost always gives 2 different spot on each side of the tyre?
Either way should be fine!
I bought the wheels weights but they do not stick on the wheels very long at high speed. I even tried heavy duty double sided tape.
Hey Paul can you do video how to fix a out of round tires ? thank you. I tired inflating and deflating with maximum speed on my e scooter and i didn't fix myself ;(
I will take a look! Thanks for the tip.
1:44 please upload a video when a tire is out of round fix. Thank you!
Thx
No problem
Hi ESG team thanks for the video! At what speed should you be looking for tyre vibration?
Wherever its the worst
Most likely over 20mph
Been trying to balance my Blade for weeks now and can't for the life of me get any of the weights to actually STAY stuck. The adhesives just don't seem to be enough, as soon as I'm over 35-40mph they go flying off
I've got the Emove Roadster with the same tire tread. The scooter will shake/vibrate while accelerating and decelerating around 38mph-50mph. I'll give these weights a shot. Should weights always be applied in all four directions on a wheel? Or does it depend.
You’ll end up with the weights in only one spot. But it’s good to try all four directions one at a time to see where the shaking is best and where it is worst. Then refine from there. It can make a big difference. Be careful. Wear glasses and stand next to (not in front of or behind) the scooter while testing, in case a weight flys off.
Thank you for the video. Th weights are holding nicely without the tape.
You're welcome!
thumb up love this vid
Thanks so much for the kind words! -Vosk
Hi I need to do this as my scooter at 30 km has a bad vibration but there’s not as much room between the motor and rim any ideas?
Hope it does the trick! -Vosk
Solar p1 the rear is really bad.. Really bad.. will try this
Best of luck!
Having the same issues with my roadrunner pro front tires
Hopefully can be a quick fix!
I run the tire off the ground till it wobbles good . Then at the speed take a yellow marker paint pen and find the spot . Put weights on the opposite side.
What could i use instead of tape to keep them mounted
This stuff helps. One of the problem with steel weighs vs the old lead ones is you can’t bend them to match the curve of the rim. So to help the adhesive stay attached, it helps to use a thicker layer of adhesive than what comes on the weights. I sometimes use this stuff (first link below). GoPro style adhesive is even thicker. (Second link) it’s nice to have something over the top of it too. I tend to use color-matched duct tape or gaffer tape, you don’t need to use a huge amount. I suppose you could use silicone (RTV) too. -Paul
1 Inch Width 33 Ft Length 3M VHB... www.amazon.com/dp/B09BB1HYX7?ref=ppx_pop_mob_ap_share
SUNMENCO 48pcs Red 3M VHB... www.amazon.com/dp/B0771HQ88G?ref=ppx_pop_mob_ap_share
@@RiderGuide damn thank you for the fastest respond im the history
Ha ha! Happy to help!
Thanks for watching! -Paul
Link to the 5 gram weights and lift used is broken. Can you please replace
Sorry about that Stiven! I've updated it in the video description and pasted it below.
www.amazon.com/Supply-Steel-Stick-Wheel-Weights/dp/B0068EQ9W0/ref=sr_1_3?crid=3H3D635MUSCNU&keywords=5+gram+wheel+weights&qid=1660347681&sprefix=5+gram+wheel+weights%2Caps%2C370&sr=8-3&tag=electricsc0cc-20 -Paul
Yeah
Thanks @Nhan Vu! -Paul
What jack/lift table is that?
a.co/d/euOgpPS
Can Dyna beads be used in the Nami tires?
We have never tried that!
Noice 👌
Thank you @beyondxxth! -Paul
@@RiderGuide it's actually so helpful 👍👍
I'm gonna do it this week
And I'll share the results ✌️
Awesome! Just don't get hit by flying weights! Best to stand next to the scooter when checking balance points! I should have said that in the video.
Looking forward to hearing how it goes. If you can, start in single motor mode. Makes it easier to figure out which end is shaking. Once that end is tuned up, it won't shake the other end. -Paul
Just super gule them on kol
lol
Where can I buy the weights?
Here you go Paul! -Paul
@@RiderGuide ?
Sorry. Super late with this one. I pasted a link but I guess it didn’t work for some reason! -Paul
www.amazon.com/Supply-Steel-Stick-Wheel-Weights/dp/B0068EQ9W0/ref=sr_1_3?crid=3H3D635MUSCNU&keywords=5+gram+wheel+weights&qid=1660347681&sprefix=5+gram+wheel+weights%2Caps%2C370&sr=8-3&tag=electricsc0cc-20
Easy. Try to straight disc brakes : D
Got you covered. It's an old one, but a good one. -Paul
th-cam.com/video/ZchQVZH8kA4/w-d-xo.html
@@RiderGuide Thanks! : )
I asked Costco to sell me a strip and I got a freebie strip of weights!
Awesome!
These motors get up tp 85c, adhesive will easily melt.
Thanks for the feedback!
Balance the wheels or let it cause stress fractures
Very insightful! Thanks for sharing. -Vosk
This is why you buy quality products so you don't have to balance your tires never had to balance my mini motors scooters at all
Fix your rotor too because I can hear it scraping on the brake pad anytime you go up to high speed be more concerned about that then your wheels
I've got a chatter on my solar ff lite. It's so annoying. I've tried to adjust it but it comes back the first time I apply the brakes