Lets Crack 100km/h, or do I go for 100mp/h - Turbo barra Boat. Wild Thing!

Lets set a Goal to crack 60Mph! i thinks we can achieve it pretty easily! then do we go for 80mph!?
Online store - bobbymcboost.com
Thank-you for the support!
You really do help me make these videos happen, with the small money input and a huge Motivation booster!
// Please consider following me on my socials!
bobby_mcboost
BobbyMcBoost/

[@matui6983]

Chop the length of the rudder
Fit stops to the steering quadrant so it cant flick right around.
The inches of pitch of the prop are how far it moves thru the water in one revolution. So cutting the diameter diwn while leaving the pitch intact or even finding a similar dia prop with more pitch should help.

[@dank_productions94]

I had a chat to him about doing this a while back, its still fast as f**k atm hahaha hope to see how it all goes soon

[@tylerdubiniak8068]

cable is alright. I've got an ex race boat and that runs cable but with stainless pulleys and a fairly thick cable and double clamps on the ends. I think cable gives the most feedback which I like when I'm going fast. I wanna know exactly what everything is doing. Usually the torque steer means your prop has plenty of bite in the water but mines running an outboard. Yours might need a shaped rudder to counteract the spin of the prop wash, which might be whats giving you the torque steer?

[@Liam-ir6xm]

Keen to see how it all goes with the new bits and better flowing gate. Yeah i feel you on the weather, Cant wait for it to start warming up a bit down here.

[@jackross2524]

For steering cable Use 5mm stainless think it’s 7x19 strand can get it from whitworths

[@tommurray8312]

look too the ski racing guys, its all been done

[@DatBlueHusky]

dang wish it was a longer vid, cant wait to see when you send this thing

[@peopleshit5661]

That axle 👌

[@dank_productions94]

Hope that info i gave you although basic was enough to get you thinking haha will go extra good with that ruddder cut down abit and prop pitch sorted, hard to know what to go with with the engine combo!

[@Lplaterwrx]

Happy late birthday mcboost!

[@richardwalsh5570]

Yep, bloody freezing here down the coast too mate

[@spg3331]

sick as mate

[@garethmcgregor1621]

Happy birthday👍

[@lukeclarke1068]

Full sends let’s go

[@resultsmayvary5848]

mate, a dutch rudder will sort you out! quick google search will have you heading in the right direction :)

[@samb4461]

when are you getting the Turbo Terry out ?

[@EricaMTB]

Is Maxspeeding still helping you?

[@lachlancorben1720]

mate wheres the turbo burn barrel

[@shaggyrandy1264]

Horizontal ribs on the hull to disrupt the surface of the water will make you go faster

[@BobbyMcBoost]

This is interesting!! 🧐

[@michaelharvey24]

Leave the rudder. We run ones that long on race boats. Need to change the pitch of the prop not the diameter. What is the prop shaft angle? Looks like it is a fair bit and I doubt you’ll run 100mph with it like that. Needs to be around 8 degrees and you need cav plates on the back. It’ll get to the stage reel soon you won’t be able to keep it in the water.

[@BobbyMcBoost]

Love the info. I'll check the angle!
Wont be able to keep it in the water, as in it will jump around to much and be unstable without cav plates?

[@needmoreboost6369]

It will start lifting out of the water! the flatter the prop shaft sits the better! as in closer to parallel to the hull the more stable it will be,pushing boats out of the water was an old way to reduce drag but now we have boosted Barra’s to do that you don’t want to run wet but still lay flat

[@michaelharvey24]

@@BobbyMcBoost even with cav plates you can still jump them out of the water. But yeah setup correct and you’ll be fine.

[@keilfestin4606]

Would you consider doing a Barra swap for GU if someone pay you ? Im looking into converting my Rd28 :)

[@matui6983]

Bggest mistake Nissan ever did was dropping RD28's into Patrols even the SWB ones.

[@unchartedgroupielove]

100mph boat easy. get some Kevlar shorts, a race jacket, helmet and send it

[@everythingbogon3858]

Don’t be sorry just do you bro

[@MixMasterMark]

OI BOBBY WHEN ARE YOU DOING A WARM 253 WITH A TRIMATIC BUILD.

[@Gooie69]

Blat blat blat blat blat

[@stack3r]

Lol

[@everythingbogon3858]

If ya wanna go fast go a jet instead of a prop then you can use links the steer

[@needmoreboost6369]

It’s much easier to go fast on a surface piercing prop than a jet

[@fossilfuelenthusiast]

100kph feels plenty fast on the water. 160 in that no way 🤣

[@nikleyde702]

We race jet boats and no matter how many times I do it, my asshole puckers real tight as we cross the finishline. A jet boat that's hull weighs about 350lbs with a 540 cubic inch big block and blower pushing out 2500+hp is fucking terrifying. it blows past 160mph like nothing

[@anthonyshaxson2627]

Bobby mcboost

[@stevend4544]

Over 100 mph id sugest a capsule those water drag guys got killed all the time when they started getting that fast

[@BobbyMcBoost]

😳

[@stevend4544]

Cause after those speeds the air acts like water and youll likely have take off not a boat expert at all but just have an uncle who is obsessed

[@dank_productions94]

@@stevend4544 not in a ski boat hull mate you'd have to be pushing like 400kph 🤣

[@stevend4544]

Fr how do they do that my infos probably hella dated

[@stevend4544]

Fr how do they do that my infos probably hella dated

[@happieyak]

100 mph with no adjustable cav plates. one very hairy drive.

[@dank_productions94]

how real men go 100mph on the water

[@ronniewilliz153]

Yes please wear a helmet an neck braces at least

[@Spaz_Industries]

personally id go hydraulic steering, rudder is fine and change the pitch on propeller not the size and youll be laughing cobba