2020 RAV4 Interior Lights Replacement
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- Here I'm replacing my 2020 RAV4 interior light bulbs with LED ones, it's so much better at night now, aside from the frustration faced during the map light replacement step everything else was good. Link to the bulbs I used is below:
www.amazon.com...
Good to know what to expect, and what to look out for. Just the kind of info I was looking for. Thumbs up!
I changed my front dome. U can pull the whole assembly out and change bulbs from back without taking clear lenses off. Much easier than trying to do it that way
Regarding replacement of map light bulbs on a 2020 RAV4. I tried cautiously to remove the lens covers over the map lights, without removing the whole console.
I stopped trying this because I thought I was using so much force that the lens was going to break. I tried this for hours.
It was a nightmare as I expected to break the lens at any minute.
Then I decided to leave the lenses alone and take out the entire console. This takes a bit of force too. You have to angle your prying tool up and in.
But out it popped. First one end and then the other.
I then disconnected the electrical connector and took the console to my bench.
It took 2 minutes to unscrew the 2 bulb holders from the top of the console, pull out the OEM bulbs and push in the LED bulbs, then screw the two bulb holders back in.
To replace the console.
There are 4 red plastic push-in fasteners on the top of the console.
Make sure they are seated correctly in their holding frames.
Hold the console up to the roof lining, and line up the fasteners with the 4 holes in the brackets on the underside of the metal roof.
Push up gently at first to engage them, then hard, front and back. The fasteners will pop into place.
The console is now back in place with new bulbs in.
Job done and nothing damaged.
This method should take about 10 minutes.
Thank you so much, i got stuck in the center piece front top light also. Will try again.
it is much quicker to remove the entire instrument panel and unscrew only the bulbs
Why do this in pitch black dark? I appreciate the video but damn
,,👍👍👍
What the fuck man? Totally skipped the mirror lights???
this is a useless video
Okay, maybe elaborate on this a little more as to why you think this is useless? I'm interested in learning and incorporating your feedback in my future videos. Thanks.
@@WheeNC-DIY Ok, sorry, it was too hard to say useless. It is a great video but the reason to watch this: how to take of the part without any damage. I am already done with this in my car. I just wanted to see how easy could be.
Sorry, Thank You.
worst tutorial 💀