Thank you so much. After following your steps,my fake USB of 1TB is originally 10gb. I would highly recommend that everyone should use this software. Thank you
Great tutorial! Thanks In my case for a 2TB fake USB (with dual port: USB A and USB type C), it marked 223 GB real after 12 hours of analysis. Now it is working fine on both PC and Android. Pd. It goes without saying that you should not use this kind of flash drives for important files. Best regards from El Alto - Bolivia.
J'ai mis ton tuto en pratique sur une clé fake de 250Go qui n'en fait que 30, 7 Go. J'ai donc créé une partition saine de 30Go et les 250 Go "fake" ne sont pas alloués. Vraiment cool ton tuto car maintenant j'ai au-moins une clé de 30Go fonctionnelle (surtout que j"en ai 5 des clés comme cela) . Un grand merci à toi pour le partage de ton expérience.
After following your steps i successfully brought back the original storage which is 14gb 🥰(it was at least 1.9 terabyte before) A big thanks to you my friend for the tutorial, it helped me alot ❤️
But if you "clean" or clear your drive with a command it reverts back to the fake size since you only created a partition of the right size that actually fits in the real space it has, is there a way to, as they did to make the scam, to make the drive actually read the correct capacity?
Great video, If you go through Windows Disc Management, (delete the disc and create an active partition) is it the same? What's the difference? Thank you
hi, i hope you are doing fine. I resized my 2tb fake usb to 148 gb usb but whenever I connect it to computer it needs a format to show its size. without formatting it does not work. but I have to repeat formatting every time. what should I do now? I am looking forward for a permanent solution. thank you so much
if you're done with finding out the true capacity of your USB, then it's time to do the process in 4:03 of the video, where you will format the USB to the right size. I hope it helps and thanks for trying the tutorial.
I haven't checked on the application yet, if you followed my video and there is no more option for Linear Write +Verify then perhaps the application has been updated by the developers. I will check it as soon as I can. Thank you.
an error has occurred. the destination you have specified does not exist. it might be an offline network location or an empty cd or dvd drive. check the location and try again. Does it mean that the hdd is fake?
I have not checked the website but if in case it can't be accessed anymore, there is a manual way but is not super accurate and a bit tedious. You will have to put big files in your flash drive and then check if the file is not corrupted. Perhaps a collection of movie or something that you can easily check if it has been corrupted or not. Check the file size start with very big files or as close to 2tb as you can. Or just yry big files if it will not corrupt. If in case the file got corrupted reduce the size of the file until the files are not being corrupted anymore which means that is the real capacity of your flash drive. Then if you know the aproximate capacity follow the format procedure so you can change the capacity of your flash drive. Hope it somehow helps.
I don't think there is a way to save the progress, just make sure you will not use your computer before you do this because it sometimes really take up so much time.
if from the start your pc cannot read your USB flash drive then it is possible that your USB flash drive is faulty, unless you have a lose USB port. which might be causing the problem.
Hi @kowk Thank you for your video, I have a question, After 278 min, It's said: "Data Integrity Passed the Test" on my fake USB key 1.9 TB, so what should I do in this case?
you did not encounter the error? if there was no error and the whole process finished and passed then you have the right value for your usb. to further test fill your usb with files to max capacity and see if the files won't be corrupted and would still be usable, if the files are not corrupted then you have a good usb :)
The AIDA64 program said 26gb. Is that rounded number? I'm just curious if when you type 26000 for your partition, will this possibly leave any amount of "fake" capacity that can still be used. I noticed of course the offset of 1024kb, is that for calculation or rounding errors? I don't know much about this but I just don't want to lose even one file by accident. Thanks for the video.
If you have files stored in your drive do not do this procedure because it will erase all the files that you have in your drive, also after doing this procedure, don't put very important files in this drive because it can be faulty knowing that the drive is fake after all.
This software is not working for me. When I choose to enable write tests, it never allows me to choose the usb drive. In fact it doesn't allow me to choose anything. The drop down menu is grey and I cannot click it. It also says write tests cannot be performed on optical drives. Sorry this is a complete fail for me.
It stopped after 12 hours plus and my real flash drive capacity is 176gb. I'm pretty satisfied with it because I got it for only 199php wherein for that price, I could only get 32gb max from branded stores like sandisk.
wow that is nice, but remember this is a fake USB meaning a faulty USB. Do not use it for very important files. We only identified the capacity usable but we cannot guarantee that it will not fail since it's a faulty USB from the start.
@@kowk2020 i think its higher than 40gb cuz it went to 4 hours and then i needed to sleep im starting again this morning to until it finishes wish me luck
Thank you, I've recently bought this really cheap usb thumb drive and a lot of files corrupted. Well it happened before so I just copy instead of moving files to it. And after confirming the actual size of the thumb drive I got a result of only 120 mb! 31880 mb difference! (32g). It doesn't matter though.
@@kowk2020 i have a problem , when i fill my 22GB flash it says to me this drive have a write protection after getting 533MB free in my flash , have you a tips for it ?
@@sdt235 check if your flash drive has a manual switch for write protection, or if not try formatting again the flash. Also, just use this flash for media purposes. I don't recommend putting in it very important files since this flash drive is faulty/fake from the start.
@@kowk2020 i think it's fake from the start and the flash drive do that to me all the time and when i searched for how to remove write protection it always giving me this message when i copying a files more than 20GB , the flash has a 128GB as an available space so i don't know what to do
Fake usb can make serious problems, when you exceed the true capacity the new files will either be ignored or overwrite the original which is far worse,corrupting your files.
I would like to get the software the hackers use to modify the storage value that the firmware in the stick reports to the system I know it exists I've seen it once It allows access to the hexadecimal values in the firmware and by changing several values you can make the stick say any value you want Resetting these values to the correct value makes it easy to format and partition without having to do anyting else and without worrying about someone coming along and seeing this empty extra partition that's not real and overwrite your data thinking there's extra space I've never seen a video done about how to fix the firmware but I have seen it done in real life I have no idea what software they were using to make the changes If anyone knows what software or how to change these values in the firmware please let me know Thanks
Ok. I did your steps. It worked and it said it was 3570 mb! I was disappointed, especially for a 2tb. But It let's me add more than 3570 mb which is surprising. I don't understand if its a scam and the software isn't working.
If you haven't formatted it to the right storage capacity it will surely allow you to add more files. Just check if after saving many files beyond the original capacity if it is not corrupted. This fake usb will allow you to enter even up to almost 2 TB but the problem is it will corrupt your files and render the files unusable.
matagal po talaga yung sa akin iniwan ko po eh kasi sobrang matagal depende sa true capacity nya, kung hindi fake yang usb mo mas lalong matagal yan kasi hindi hihinto ang testing hanggat di sya nag error or mareach ang true capacity. para sana malaman mo kung fake nilagyan mo ng maraming files yung lagpas 1 tera pag na save lahat tapos pag access mo corrupted fake po yan sure na. itong process na ito para lang po malaman kung ilan talaga ang capacity ng usb
much better po wag gamitin for very important files as back up, since fake po sya malaki pa din tendency na mag fail sya though itong guide po eh para at least magamit po sa not so important media files
Bro what can I do when is says after inputting "fs=fat32 label=**** quick", it says that "Virtual Disk Error: The Volume size is too big" What will I do? please help I have 62gb out of my 1tb usb
@@kowk2020 hmmm I tried doing this method to my second USB, same brand, it said 2tb too and it took me 3 hours and 10 mins but it's still not prompting anything, you said it will pop up a notification telling the original storage capacity and yours stop at 84 mins which has 26 gb, mine is at 190+ mins and still counting, does that means mine still has bigger storage?
Thank you so much.
After following your steps,my fake USB of 1TB is originally 10gb.
I would highly recommend that everyone should use this software.
Thank you
Great tutorial! Thanks
In my case for a 2TB fake USB (with dual port: USB A and USB type C), it marked 223 GB real after 12 hours of analysis.
Now it is working fine on both PC and Android.
Pd. It goes without saying that you should not use this kind of flash drives for important files.
Best regards from El Alto - Bolivia.
J'ai mis ton tuto en pratique sur une clé fake de 250Go qui n'en fait que 30, 7 Go. J'ai donc créé une partition saine de 30Go et les 250 Go "fake" ne sont pas alloués. Vraiment cool ton tuto car maintenant j'ai au-moins une clé de 30Go fonctionnelle (surtout que j"en ai 5 des clés comme cela) . Un grand merci à toi pour le partage de ton expérience.
After following your steps i successfully brought back the original storage which is 14gb 🥰(it was at least 1.9 terabyte before)
A big thanks to you my friend for the tutorial, it helped me alot ❤️
I am happy that it somehow helped :)
But if you "clean" or clear your drive with a command it reverts back to the fake size since you only created a partition of the right size that actually fits in the real space it has, is there a way to, as they did to make the scam, to make the drive actually read the correct capacity?
Great video,
If you go through Windows Disc Management, (delete the disc and create an active partition) is it the same? What's the difference?
Thank you
At 2:13, I don't have the LINEAR WRITE + VERIFY option, but i have the option that's similar, which is LINEAR READ. Should I go for that?
me too at first, try to download not the portable version
hi, i hope you are doing fine. I resized my 2tb fake usb to 148 gb usb but whenever I connect it to computer it needs a format to show its size. without formatting it does not work. but I have to repeat formatting every time. what should I do now? I am looking forward for a permanent solution. thank you so much
if you're done with finding out the true capacity of your USB, then it's time to do the process in 4:03 of the video, where you will format the USB to the right size. I hope it helps and thanks for trying the tutorial.
There is no Linear Write + Verify in the application.. What to do?
I haven't checked on the application yet, if you followed my video and there is no more option for Linear Write +Verify then perhaps the application has been updated by the developers. I will check it as soon as I can. Thank you.
I downloaded it today and it's there. Double check or you have downloaded the wrong software, perhaps!
@@haseebchowdhury Thank you very much for checking and clarifying this. Greatly appreciated. :)
Thank you for this!!🥺 now I know how to change my 2tb kuno with its original capacity too. ❤️
Happy to help!
thank you sir ! youre my savior
you're welcome, I'm happy that this somehow helped you
What is this? A video for music?
an error has occurred. the destination you have specified does not exist. it might be an offline network location or an empty cd or dvd drive. check the location and try again.
Does it mean that the hdd is fake?
Where did the error occur? while doing the process? or upon inserting the USB drive?
When i click the start , there is no numbers showing in the current, minimum, maximum, average etc?
It just the time
Do i done it right? Or something is wrong?
I am not sure with your concern but if I do the process again I get the same result as in my video. I really wish I can help more.
i tried it and my linear write and verify still on going and it still reading my usb for 6 hours is it a good sign?
Sometimes it takes longer than 6 hours. It's a good sign because it means your USB has bigger capacity.
Nice bishop.. very informative..subscribed!😊
Appreciated
Hello, the website is updated now and it needed a key license for it to download. I really need to know how to see if my 2tb is fake 😭😭
I have not checked the website but if in case it can't be accessed anymore, there is a manual way but is not super accurate and a bit tedious. You will have to put big files in your flash drive and then check if the file is not corrupted. Perhaps a collection of movie or something that you can easily check if it has been corrupted or not. Check the file size start with very big files or as close to 2tb as you can. Or just yry big files if it will not corrupt. If in case the file got corrupted reduce the size of the file until the files are not being corrupted anymore which means that is the real capacity of your flash drive. Then if you know the aproximate capacity follow the format procedure so you can change the capacity of your flash drive. Hope it somehow helps.
is there a way u can save your progress and continue tomorrow?
I don't think there is a way to save the progress, just make sure you will not use your computer before you do this because it sometimes really take up so much time.
@@kowk2020 ok
Thanks for this vid. Now i can determine what legit and whats fake. Supporting u here my friend
thank you
Thanks this is what I've been looking for
How to fix, if the pc can't see(read) the size of drive?
if from the start your pc cannot read your USB flash drive then it is possible that your USB flash drive is faulty, unless you have a lose USB port. which might be causing the problem.
I will try this method... I bought 2TB flash drive and some of file suddenly deleted or empty. and some videos wont open.
Hope you have a good size of storage from your 2TB flash.
Hi @kowk Thank you for your video, I have a question, After 278 min, It's said: "Data Integrity Passed the Test" on my fake USB key 1.9 TB, so what should I do in this case?
you did not encounter the error? if there was no error and the whole process finished and passed then you have the right value for your usb. to further test fill your usb with files to max capacity and see if the files won't be corrupted and would still be usable, if the files are not corrupted then you have a good usb :)
@@kowk2020 No error at all, I’m very surprised because I followed all your steps properly, I will fill them with full files and let you know 🙏
The AIDA64 program said 26gb. Is that rounded number? I'm just curious if when you type 26000 for your partition, will this possibly leave any amount of "fake" capacity that can still be used. I noticed of course the offset of 1024kb, is that for calculation or rounding errors? I don't know much about this but I just don't want to lose even one file by accident.
Thanks for the video.
If you have files stored in your drive do not do this procedure because it will erase all the files that you have in your drive, also after doing this procedure, don't put very important files in this drive because it can be faulty knowing that the drive is fake after all.
This software is not working for me. When I choose to enable write tests, it never allows me to choose the usb drive. In fact it doesn't allow me to choose anything. The drop down menu is grey and I cannot click it. It also says write tests cannot be performed on optical drives. Sorry this is a complete fail for me.
It stopped after 12 hours plus and my real flash drive capacity is 176gb. I'm pretty satisfied with it because I got it for only 199php wherein for that price, I could only get 32gb max from branded stores like sandisk.
wow that is nice, but remember this is a fake USB meaning a faulty USB. Do not use it for very important files. We only identified the capacity usable but we cannot guarantee that it will not fail since it's a faulty USB from the start.
u ran your pc for 12 hours straight?
@@ShayCraft this depends on the capacity of your usb, the higher the real value the longer it will take.
@@kowk2020 i think its higher than 40gb cuz it went to 4 hours and then i needed to sleep im starting again this morning to until it finishes wish me luck
@@ShayCraft good luck :)
Thank you, I've recently bought this really cheap usb thumb drive and a lot of files corrupted. Well it happened before so I just copy instead of moving files to it. And after confirming the actual size of the thumb drive I got a result of only 120 mb! 31880 mb difference! (32g). It doesn't matter though.
Sorry to hear that it's original size is too low.
Hello , can we pause the verification process?
better wait and finish the process to be safe. haven't tried pausing it though.
this is really great information. this will help a lot of people
Glad you think so!
Thank You, I will check mine 2TB drive now!
I've ever encountered this. Here to show some love. Let's connect
thanks you have wonderful designs also, i like it :)
@@kowk2020 thanks 😄
It works this on FAKE SD CARD?? or not??
Sorry I don't know, I have not tried this process on SD cards. If ever you will try it please comment if it works. Thank you.
or you could try aptools to re program the usb flash to set its original capacity.
thank you for the suggestion
this was super helpful, thank you so much!!
Glad it was helpful!
Informative and helpful. Thanks.
Glad it was helpful!
it works a 100 percent , great job m'friend
Thank you. I'm glad it works for you.
@@kowk2020
i have a problem , when i fill my 22GB flash it says to me this drive have a write protection after getting 533MB free in my flash , have you a tips for it ?
@@sdt235 check if your flash drive has a manual switch for write protection, or if not try formatting again the flash. Also, just use this flash for media purposes. I don't recommend putting in it very important files since this flash drive is faulty/fake from the start.
@@kowk2020
i think it's fake from the start and the flash drive do that to me all the time and when i searched for how to remove write protection it always giving me this message when i copying a files more than 20GB , the flash has a 128GB as an available space so i don't know what to do
@@kowk2020
i checked the manual switch for write protection and there is nothing like that
Fake usb can make serious problems, when you exceed the true capacity the new files will either be ignored or overwrite the original which is far worse,corrupting your files.
So helpful Content
And interesting
Thanks for this my
Freind about fake USB
thanks for coming
I would like to get the software the hackers use to modify the storage value that the firmware in the stick reports to the system
I know it exists I've seen it once
It allows access to the hexadecimal values in the firmware and by changing several values you can make the stick say any value you want
Resetting these values to the correct value makes it easy to format and partition without having to do anyting else and without worrying about someone coming along and seeing this empty extra partition that's not real and overwrite your data thinking there's extra space
I've never seen a video done about how to fix the firmware but I have seen it done in real life
I have no idea what software they were using to make the changes
If anyone knows what software or how to change these values in the firmware please let me know
Thanks
This really good I have actually bought alot of USB and the storage capacity is fake
it's hard to buy online sometimes, thanks for the visit
Can it reach more than 3 hours sir?
depends on the capacity of your flash drive and speed of your pc. mine lasted more than 3 hours
@@kowk2020 thank you sir
@@kowk2020 i bought a fake 2tb usb im very pissed
took me 10 hour lmao,
but i get 153gb from my 2tb flashdisk so worth it!!
wow you're lucky having 153gb capacity, I only got 26gb
now i know to check and determine one if its not real thank you
welcome po, and thank you :)
Really thax for this video it's informative
thanks
Really creative well done x
Thank you! 😊
thanks but now I have that theme tune stuck in my head
Thanks for this very informative videos from you
thank you very much
Thanks for sharing this I love your content
Thanks for watching!
Pls show me love
noooo. my 2 TB flaskdisk is ffake
Sorry to hear that you're one of us who bought the fake usb.
nice one...thank u i return your knidness
Thank you too
Ok. I did your steps. It worked and it said it was 3570 mb! I was disappointed, especially for a 2tb. But It let's me add more than 3570 mb which is surprising. I don't understand if its a scam and the software isn't working.
If you haven't formatted it to the right storage capacity it will surely allow you to add more files. Just check if after saving many files beyond the original capacity if it is not corrupted. This fake usb will allow you to enter even up to almost 2 TB but the problem is it will corrupt your files and render the files unusable.
@@kowk2020 ill test it to put a game on it. if it works and it doesn't corrupt it should mean its over 3570 mb.
@@kowk2020 ok. I got on the drive and it was corrupted , it wasn't important but it can hold 3570 mb only.
I've formatted and got it to its correct size, thanks!
@@mustydp2068 I was hoping it wouldn't be corrupted so you can have more space but then, it really is fake. Sorry about that.
Nice. Thanks for sharing.
Thanks for watching!
interesting differentiations about usb
thanks
hi. almost 3 hours na ang akin sir. may paraan ba para mapabilis. 2tb daw pero alam ko fake kasi ang bagal
matagal po talaga yung sa akin iniwan ko po eh kasi sobrang matagal depende sa true capacity nya, kung hindi fake yang usb mo mas lalong matagal yan kasi hindi hihinto ang testing hanggat di sya nag error or mareach ang true capacity. para sana malaman mo kung fake nilagyan mo ng maraming files yung lagpas 1 tera pag na save lahat tapos pag access mo corrupted fake po yan sure na. itong process na ito para lang po malaman kung ilan talaga ang capacity ng usb
umaabot po ba talaga ng ilang oras yung pagtest?
depende sa laki ng usb mo at speed na din siguro ng pc, sa akin kasi sobrang tagal halos 4 hours yung hinintay ko.
please Help Me Bro My Disk D: Is Hide ???????please Help
Can you tell me what happened? Is disk D: your flash drive or hard disk?
@@kowk2020 Hard Disk
My Facebook Profile please Help
@@sarkawtmax did you choose the correct drive while doing the entire process? Because the procedure is for flash drives only.
Try checking your disk in Disk Management
Thanks for sharing I learnt something new friend ♥️♥️😗
You are so welcome, thanks for coming
Good idea to share ur content thank u bro keep on vlogging
Thank you too
beautiful and fantastic vedio
Thanks 🤗
Very informative video! New friend here! 🤗😘
Thanks for coming
this is very nice information
Many many thanks
this very informative salamat po neew friend here
salamat po
Thanks po. Btw, safe na po ba sya gamitin at hindi na po ba sya macocurrupt?
much better po wag gamitin for very important files as back up, since fake po sya malaki pa din tendency na mag fail sya though itong guide po eh para at least magamit po sa not so important media files
thanks bro 😁
Thanks a lot!
wow nice thanks sa info
maraming salamat po
best way is to buy from genuine manufacturer website. if price is too low and unrealistic its fake.
Thanks for this idea
So nice of you
Wow very good.. I didn't know.
Thanks for visiting
the heck,
3589MB from 2TB
Aww. Sorry bout that. 😔
Bro what can I do when is says after inputting "fs=fat32 label=**** quick", it says that "Virtual Disk Error: The Volume size is too big"
What will I do? please help I have 62gb out of my 1tb usb
Have you finished the partition creation?
So that is literally a reverse version of faking a USB size 🤔 😂
:)
thats great and owesome
thanks a lot
Wow Nice vidéo
thank you
bruh my 5$ usb stick that says 128gb is acctually 500mb lolll
sorry bout that bruh, sometimes the truth hurts :)
@@kowk2020 :")
Great keep it up
Thanks
informative video new hir
Thanks
wow nice video :)
Thank you 🤗
Cool and nice
Glad you like it!
From 2TB to 3gb
oh my that is so low
@@kowk2020 hmmm I tried doing this method to my second USB, same brand, it said 2tb too and it took me 3 hours and 10 mins but it's still not prompting anything, you said it will pop up a notification telling the original storage capacity and yours stop at 84 mins which has 26 gb, mine is at 190+ mins and still counting, does that means mine still has bigger storage?
if you read the other comments, others stopped at more than 12 hours and they got a higher capacity value :)
@@kowk2020 oh I see! Thanks sir! This really helped me alot
🧡💓🔔👍👆❤️
thank you so much
Hi sir
hello po, salamat sa dalaw
Thumbs up
thanks po
Now tell me how to convert 25GB into 2TB 😁😁
Interesting. Thanks for sharing
Thanks for watching!