For me, the ideas in th-cam.com/users/postUgkxAfqpMLyFn37qcqUl0FAzqkkycQeXqrhP Plans were a starting point for building different sheds . Ryan gives ideas that allow an individual to draw nicest conclusions into the design and building of his or her own shed.
28:20 elements between sb beams at roof centre appear from nowhere, L profiles are not trimmed correctly at intersection, roof cladding is not supported (literally floating) from sides, rectangular profiles also are not trimmed etc., for someone who is little more experienced these things stick out...nevertheless nice video
Hello sir, Thank for your video, it really helps me a lot to expand my skill in designing but I want to ask you, how can I get more size for each weldment profile? I see you have lots of choice of size choosing sb beam while i have only three options for sb beam.
@@AbdulHaseebSIME Do you know any company or Individual, who can help to design for this shed professionally? I have a team of fabricators, and need the CAD drawings for proper fabrication.
Good morning, Compliments for her work is great! I wanted to know how to select all the solid from the 4.00-4.10 minute To convert it to 3D line? Thank you and good continuation Luke
Great job and awesome video but where is the second part the analysisi and the design video? Can you upload it if it is exist please. And again thank you for that great videos that you have it in your channel
Can you design shed for me. I am interested in constructing factory shed of 170 m length 37 m width and 5 m height . I want to put 1 coloum in the middle. What will be your charges. Which is cheaper pipe structure, angle structure or prefabricated
I just couldn't follow the super fast mouse movements, i had to give up 2.24 minutes into it, a shame really that you couldn't do it with voice and actually talk people through it.
Too approximately modelling... there are too many profile not cutted or shaped, but if the intention was to show basic rule to use Solidwrorks in steel structure it's ok.
![Как устроены швейные машинки? [Veritasium]](/img/n.gif)
For me, the ideas in th-cam.com/users/postUgkxAfqpMLyFn37qcqUl0FAzqkkycQeXqrhP Plans were a starting point for building different sheds . Ryan gives ideas that allow an individual to draw nicest conclusions into the design and building of his or her own shed.
How about making a second part of the video about simulating the strength analysis of the shed. Awesome video BTW.
28:20 elements between sb beams at roof centre appear from nowhere, L profiles are not trimmed correctly at intersection, roof cladding is not supported (literally floating) from sides, rectangular profiles also are not trimmed etc., for someone who is little more experienced these things stick out...nevertheless nice video
Compliments for her work is great!
Thanks brother keep making on solidworks
You drawn excellently
Solidwork
Best for gaining knowledge thank you so much
45mtr span said tàrss draing
u r just the best
Ha mene kr diya
Great job. Got dizzy trying to follow up your mouse movement.
thanks for the knowledge :)
This video scares me😵💫
best videos bro
Angular shed or pipe shed or prefabricated shed, which will be cheap
Hello sir,
Thank for your video, it really helps me a lot to expand my skill in designing but I want to ask you, how can I get more size for each weldment profile? I see you have lots of choice of size choosing sb beam while i have only three options for sb beam.
same problem i am facing now... you found any solution?
@@AbdulHaseebSIME Any solution?
@@waseemabbas6703 yes download from solidworks libraries and manually put these section into directory
@@AbdulHaseebSIME Do you know any company or Individual, who can help to design for this shed professionally? I have a team of fabricators, and need the CAD drawings for proper fabrication.
@@waseemabbas6703 +92-347-4072746 (whatsapp only)
What about Load design and failure of parts?
I would be putting the shed on a concrete pad. Can I secure the shed to the concrete ??
Greattttttt
Not bad modeling but could be streamlined and use of Corner Treatments. Was fun!
what a nice background music...Where can I get it??
thank you very much for your availability !!!
draw a shed of 400'*55' with pillors of a distance 15' each; side wall hight 7' center hight 11'
+Sagar Saini sure ...After this simulation series we will try to make as per your requirement.
ok sir
Good morning,
Compliments for her work is great!
I wanted to know how to select all the solid from the 4.00-4.10 minute
To convert it to 3D line?
Thank you and good continuation Luke
Ctrl+a
Parabens!
Thank you! Cheers!
How can I take technical drawings for each part to produce?
Draft one...remain all are similar.. or you can use using section method in drafting
Thanks a lot for kind information…
Can we apply wind load for analysis of this she’s in solidworks ?
Yes you can apply
How can it work for PEB column or PEB beam?
Explain 28:20 please
Great job and awesome video but where is the second part the analysisi and the design video?
Can you upload it if it is exist please.
And again thank you for that great videos that you have it in your channel
How can I get SC 250 Weldment ?
can u tell me how can ı have this file?
Download through grabcad
how a very beginner can do that ..?
Please you can tell me about that How to "Solid Bodies."
Ya same issue
Right click on the Part on tree - Hidden tree items\Hide-show tree items. Then select Solid Boies. And change Automatic to Show
Which app this is
which app ?
can you tell music name
Do you hire new trainees ?
Thanks 👍
Can you design shed for me. I am interested in constructing factory shed of 170 m length 37 m width and 5 m height . I want to put 1 coloum in the middle. What will be your charges. Which is cheaper pipe structure, angle structure or prefabricated
This music so dramatic I can't even focus on the video itself
whats your software name
Solidwork
Hi bro ,how to autocad, shed design pls
It's saying 3rd part! Where is the other two? Thanks
Зачем так сложно? Зачем рисовать такой сложный каркас, если есть массивы?!
Thanks for comment
I just couldn't follow the super fast mouse movements, i had to give up 2.24 minutes into it, a shame really that you couldn't do it with voice and actually talk people through it.
सर आप काय नाव हे
Saygı duydum
Please dont use this kind of music.
Is ka app name
Hey pls stop this kind music! Getting sleepy
Plz give shed
Please tell sir
really hard to follow without explaining what you are doing
Too approximately modelling... there are too many profile not cutted or shaped, but if the intention was to show basic rule to use Solidwrorks in steel structure it's ok.
Please help
Music is very bad😠
Suicidal music, terrible choice lol would be better if you spoke or commented through the video
Contact me