All these negative comments! As an American, it is refreshing to see able-bodied young men actually working and making useful things, instead of robbing stores, selling drugs, and applying for government benefits.
You can't make PVC pipe from car bumper skins. There is no PVC in them. You can probably make pipe, but it's not PVC - and without careful sorting you won't even know what kind of plastic it is. Different plastic compounds are used by various manufacturers; ABS, polypropylene, polyethylene, etc. None of them are PVC and you can't convert one into the other.
I wonder if anyone in this country is interested in what plastic that pipe is made of. In my country, a box of matches is more expensive than the life of a worker here.
End product shown is either LDPE or HDPE pipe. Pellets that were used for production likely have nothing to do with recycling shown in beginning. Looking on them quite likely they were made of virgin material, not recycled junk,
These folks work in the most horrendous condition. I pray for their safety. Truly amazed at the ingenuity in utilizing whats barely available to make the process work I work efficiently
Always good to see these men work in primitive conditions, using prinitived methods in order to support their families. Good job viewed in California, USA
I admire your ingenuity, resourcefulness and production of goods from waste raw materials. Where do so many car bumpers come from? Where do the finished pipes go? May God protect you from misfortune.
Thank you so much Sir for your attention. Those car bumpers come from old cars and from damaged car. The finished pipes go to the market and then use for water supply and for crop cultivation. For our support Like, Subscribe and Share our channel. Thanks. 🙏❤️
Там этих пластиков целая куча. И все они друг с другом даже несовместимы. Но эти люди смешав все в одну кучу , делают кучу говна, которое потом продаётся. Не все бампера даже совместимы по составу . Там РР, РЕ , ЕРDM, ABS, PP+ PE , PP+ EPDM15D и прочая хрень. Они вместе даже не соединяются если их паять .
The usage of PVC is being abandoned since years.Because of the recycling difficulties and high cost.All bumpers are being made,for years,from PPR which is recyclable. Strong and very useful pipes are being made from PPRC.(Polypropylene Random Copolymer).So,it’s very opportune to recycle old bumpers in the production of PPRC Pipes.. But watching this video is heartbreaking 😢because of the very hard and unsafe working conditions in which these poor guys are working.😩
Thank you so much Sir for your attention. The labor here is very hardworking and talented. They can do anything whatever you want. 🙏❤️ Support us by Subscribe Like and Share our channel. 🙏
Nicely run shop. Those gas cylinders could be fed by solar generated hydrogen, instead of natural gas. Wondering about the pollution generated at the post-grind heating step. Apparently that step is intended to burn off paint & grease, and that could be replaced through a closed loop aqueous wash step.
Thank you so much for your information Sir. This is very helpful to understand the things. Keep support our channel by like subscribe and share. Thanks ❤️🙏
Если вы смотрели полный ролик, то обратили внимание на "фильтр" через который проходит горячая смесь на первом этапе. Фильтр, скорее всего, и отфильтровывает остатки краски и прочий мусор.
Everyone always marvels at their ingenuity making new items but they forget these guys aren’t chemists. They’re mixing different plastics and turning out water piping. Think of all the unsafe for human chemicals put in bumpers. Another is the metal scrapping they have no idea about. Churning out Afghan pressure cookers in small shops but the aluminum has 900 times the amount of lead allowed. Yea, great stuff.
The few criticisms to my mind is the different plastics which I think are not separated , therefore the quality of pipe , ok if its low pressure drainage -perhaps, plus the inherent danger to the hard workers. Inhalation, cutting ,hazardous work areas, no suitable personal protection .
A table saw blade sticking up with no guards whatsoever? I would like to know how often somebody cuts a hand off. It was also good to hear that Alvin still has a job.
Kenarina bir saç koymiyolar burda her yil en az 20 kişi oluyor o yüzden ben bir vide yu biyenmiyorum ki düzeltsin yonetim bu makine biraz yukari koyarsin altina bir oda yaparsin dogal olarak kirilan oraya gider veya altini kapatip hava li bir düzenek le cekip istedigin yere gider basir cocuk oyunçaga bir sistem le de nerde 😂 adamlar daakil o gerçekten hic yok
Thank you so much for your compliment Sir The labor is very hard working and smart Keep supporting us by like subscribe and share our channel Thanks ❤️🙏
Thank you so much Sir for your kind words. They are hard working and they do this job happily. Support us by like subscribe and share our channel Thanks❤️
Thank you so much for your concern Sir. But they already know how to work in this environment. Keep supporting us by like subscribe and share our channel. Thanks 🙏❤️
Vehicle exterior bumper clips are number 5 polypropylene....not pvc (polyvinyl chloride)... which is a more ridged plastic that is used to make drain plumbing parts and pipes because of it's hardness.
Where do the bumper color layers go? Where does the putty from salvaged bumpers go? Why the guys are using sieve if both small and big fractions of the ex-bumpers go into same bucket afterwards?
Thank you so much Sir for your question Some bumpers are removed automatically and some are still there. Keep support our channel by like subscribe and share ❤️🙏
Thank you so much Sir for your support. Yes this pipe is use in local domestic projects. Support us by like, subscribe and share our channel. Thanks.🙏❤️
It is not PVC, you can't make PVC from car bumpers. Car bumpers are typically made of Polycarbonate, fiberglass, steel, and other materials. PVC is not among them. It is impossible to create PVC from any kind of the step in the video.
All these negative comments! As an American, it is refreshing to see able-bodied young men actually working and making useful things, instead of robbing stores, selling drugs, and applying for government benefits.
Thank you so much Sir for your support.
I really appreciate your kind words.
🙏❤️
100% with you Sir.
Art from Ohio
Als Amerikaner scheinst zu keine Ahnung von Kunststoff oder Produkte hoher Güte zu haben!
@@vaterlandgr7553 If I were you I would get off those drugs as soon as possible.
It is good job 😊
Always good to see they are wearing safety sandals.
Thank you so much Sir
Support us by like subscribe and share our channel for
🙏❤️
They are doing what they have to do to feed there families. That is respectable wherever you are. God bless them.
I appreciate it
Thank you so much Sir ❤️🙏
So much respect for these men, they know what hard work is all about !
Thank you so much for your support 💞
You can't make PVC pipe from car bumper skins. There is no PVC in them. You can probably make pipe, but it's not PVC - and without careful sorting you won't even know what kind of plastic it is.
Different plastic compounds are used by various manufacturers; ABS, polypropylene, polyethylene, etc.
None of them are PVC and you can't convert one into the other.
True
they are making pvc pipes from ABS/PC bumpers :D
I wonder if anyone in this country is interested in what plastic that pipe is made of. In my country, a box of matches is more expensive than the life of a worker here.
End product shown is either LDPE or HDPE pipe. Pellets that were used for production likely have nothing to do with recycling shown in beginning. Looking on them quite likely they were made of virgin material, not recycled junk,
Du hast Recht, dass geht nicht. Die Haltbarkeit der Rohre ist fraglich.
Must be his first week on the job, he has all 10 fingers
No Sir they do this work for a very long time.
Support us by Subscribe and Share our channel.
Thanks 🙏👍
Common sense might have something to do with it
🤣
Oh Yeah... These Men are gonna live a long happy life...
Thank you so much Sir for your good wishes.
Keep supporting us by like subscribe and share our channel.🙏❤️
No .
But their children might.
That's a man's job, to make sure their families thrive
Зато это движение в перед!!! Посмотрите на Африку для сравнения.
Does it make you feel better to say something like this
@@НеудачнаяфамилияWhat is wrong with Africa,come and see what we do,some countries in Africa are far much ahead.
Holy crap a face shield. Bravo sir
Thank you so much Sir for your kind words
Support us by like subscribe and share our channel
Thanks❤️
These folks work in the most horrendous condition.
I pray for their safety.
Truly amazed at the ingenuity in utilizing whats barely available to make the process work I work efficiently
Тем не менее, у них есть работа.
Thank you so much for your best wishes.🙏❤️
Always good to see these men work in primitive conditions, using prinitived methods in order to support their families. Good job viewed in California, USA
Thank you so much Sir for your compliment.
Keep supporting us by like subscribe and share our channel with your friends.
Thanks 🙏❤️
I admire your ingenuity, resourcefulness and production of goods from waste raw materials. Where do so many car bumpers come from? Where do the finished pipes go? May God protect you from misfortune.
Thank you so much Sir for your attention.
Those car bumpers come from old cars and from damaged car.
The finished pipes go to the market and then use for water supply and for crop cultivation.
For our support Like, Subscribe and Share our channel.
Thanks. 🙏❤️
Glad to see them utilizing equipment from a bygone day...
Thank you so much for your compliment.
Keep Supporting by Like Subscribe and Share our channel.
🙏❤️
I just got to get me a pair of those safety toe flip-flops for my birthday 🎂. 😮😂
Great to know this Sir 🙏❤️
This isn't PVC, but it's good to see this recycling
It may be Polyethylene Pipe
It’s not PVC PE
I reckon PP judging by how it cuts
Там этих пластиков целая куча.
И все они друг с другом даже несовместимы.
Но эти люди смешав все в одну кучу , делают кучу говна, которое потом продаётся.
Не все бампера даже совместимы по составу .
Там РР, РЕ , ЕРDM, ABS, PP+ PE , PP+ EPDM15D и прочая хрень.
Они вместе даже не соединяются если их паять .
@@СергейШодуровчëрное и ладно)))))
That is SUPER DANGEROUS THE SAW BLADE!!!!!☠️☠️☠️☠️☠️
Increíble las condiciones en que todavía trabajan estos hombres Dios los bendiga y los proteja saludos desde México
Thank you for your support
I really appreciate your kindness 🙏❤️
No overalls no glove’s no shoes no goggles unbelievable thank god Britain has got there act together 👍🏿 you can see why they come here
Those are the best work boots I ever seen
Thank you 😊
This is so so clever and unbelievable interesting fascinating love it
Thank you 🙏
Glad to see he has a face mask.
Thank you Sir 😊
0:31 We are accepting applications daily for the sawman position. Competitive pay and health insurance after 3 years.
Wow it's great to hear this information
Thank you for your compliment
Keep supporting us by like subscribe and share our channel
Thanks 😊
It would only take awareness and some very simple mods to make that workplace much safer.
Yes sir you are right.
Keep supporting us by like subscribe and share our channel
Thanks ❤️🙏
The usage of PVC is being abandoned since years.Because of the recycling difficulties and high cost.All bumpers are being made,for years,from PPR which is recyclable. Strong and very useful pipes are being made from PPRC.(Polypropylene Random Copolymer).So,it’s very opportune to recycle old bumpers in the production of PPRC Pipes.. But watching this video is heartbreaking 😢because of the very hard and unsafe working conditions in which these poor guys are working.😩
Thank you so much Sir for your attention.
The labor here is very hardworking and talented.
They can do anything whatever you want.
🙏❤️
Support us by Subscribe Like and Share our channel.
🙏
respect for this people,i wish they have some orotection for their brething and skin.
Nicely run shop. Those gas cylinders could be fed by solar generated hydrogen, instead of natural gas. Wondering about the pollution generated at the post-grind heating step. Apparently that step is intended to burn off paint & grease, and that could be replaced through a closed loop aqueous wash step.
Thank you so much for your information Sir.
This is very helpful to understand the things.
Keep support our channel by like subscribe and share.
Thanks ❤️🙏
Если вы смотрели полный ролик, то обратили внимание на "фильтр" через который проходит горячая смесь на первом этапе. Фильтр, скорее всего, и отфильтровывает остатки краски и прочий мусор.
Техника безопасности в этом процессе на последнем месте
Ok Sir.
Incredible work
Everyone always marvels at their ingenuity making new items but they forget these guys aren’t chemists. They’re mixing different plastics and turning out water piping. Think of all the unsafe for human chemicals put in bumpers.
Another is the metal scrapping they have no idea about. Churning out Afghan pressure cookers in small shops but the aluminum has 900 times the amount of lead allowed.
Yea, great stuff.
Thank you so much Sir for your compliment
🙏❤️
WOW The epitome of the word “sweat shop!”
Thank you so much Sir 😊
Support us by like subscribe and share our channel
Thanks 🙏❤️
All that dust and fumes, I do not see this men living beyond their 40's
They live long than you
Glad to see the guy on the crusher, is wearing safety Flip-Flops
Thank you so much
Keep supporting us by like subscribe and share our channel
❤️🙏
And not using his hands to push the plastic in, what a legend.
All I can say is thank God for OSHA
Very nice Very proper.
Thank you so much
❤️
I am happy to see, recycling and that they can support their families :)
Thank you so much Sir for your kind words.
Keep supporting us by like subscribe and share our channel.
Thanks 🙏❤️
Developing an economy is a challenge. great content. Are these the jobs the USA wants back? Stay safe. Thank you.
Thank you so much Sir for your kind words.
You are a wise man.
Keep supporting us by like subscribe and share our channel.
Thanks ❤️🙏
Техника безопасности на высшем уровне!
Thank you 🙏
May God bless you all 💜🙏🏼
Thank you 🙏
Great job
The bloke screening looks to be in the peak of physical fitness.
You are right Sir 😊
كان الله في عونكم
Thank you 🙏❤️
While I applaud their efforts, the blatant lack of safety equipment concerns me.
Is it safe to recycle them into pipes that will pass drinking water. Maybe they should be made into waste drainage pipes.
❤️
wear protective gear pliz guys,we still want to see more of tour content ...❤
Count how many times this product is dumped on the floor only to be picked up again. Lots of wasted time and energy in this process.
I appreciate your concern Sir.
This process really needs so much hard work and effort.❤️🙏
The few criticisms to my mind is the different plastics which I think are not separated , therefore the quality of pipe , ok if its low pressure drainage -perhaps, plus the inherent danger to the hard workers. Inhalation, cutting ,hazardous work areas, no suitable personal protection .
❤️🙏
Concerned about what leaches into the drinking water. It isnt virgin polymer.
That electric box at 5:02 was made by a spider
Polithine pipe manofecturur, Good job
Thank you so much 😊
A table saw blade sticking up with no guards whatsoever? I would like to know how often somebody cuts a hand off. It was also good to hear that Alvin still has a job.
Thank you Sir for your thoughts.
Labor is very trained.
For our support Subscribe and Share our channel. ❤️🙏
@@LaborWorks-0011 That is good.
Was the way he's cutting up the plastic into smaller parts approved by OSHA? lol
With your osha life will be paralyzed there😂
Thank you so much Sir, But due to limited resources he adopted this way.🙏👍
Kenarina bir saç koymiyolar burda her yil en az 20 kişi oluyor o yüzden ben bir vide yu biyenmiyorum ki düzeltsin yonetim bu makine biraz yukari koyarsin altina bir oda yaparsin dogal olarak kirilan oraya gider veya altini kapatip hava li bir düzenek le cekip istedigin yere gider basir cocuk oyunçaga bir sistem le de nerde 😂 adamlar daakil o gerçekten hic yok
I appreciate your suggestion ☺️
I wonder how many workers lose their hands on that circular saw without and safety facilities?
I am guessing that the piece that is hacksawed off is sent to the quality control department to ensure it meets the specifications
Thank you so much Sir for your concern.
Support us by like subscribe and share our channel.❤️
Looking at it I wonder if the bloke on the bench saw works that part till he has no fingers left? I think oh&s took a break that day lol
1:19 I'm embarrassed to ask, why does he need a protective mask? Everyone there is immortal, judging by such videos.
Thank you for your Compliment Sir.
Keep supporting us by like subscribe and share our channel
Thanks ❤️
With a couple of sheets of tin and some pop rivets one could make a basic shield to protect from spinning flywheels and belts.
Thank you so much for your compliment Sir
The labor is very hard working and smart
Keep supporting us by like subscribe and share our channel
Thanks ❤️🙏
👍👍👍
Dónde estan las mascarillas de seguridad, para proteger sus pulmones del plástico
Яке лайно.. Ніхто нічого не очищує... переплявляють разом з піском і грязюкою. Труба має бути іх ПВХ, а бампери із АВС...
No safety,,what if the saw slip accidentally and his head or arms will land on the saw...it's a total ridiculous company safety policy
And we complain about the price should be made to watch this 👻
I was wondering after their flip-flops were out do they just put them in the hopper too?
Yes Sir
Thank you for your concern
Keep supporting us by like subscribe and share our channel.❤️🙏
Oh MG. THIS is the best comment. I can't stop laughing long enough to type.
That's a tough life. I hope they can find better work. Very sad
Thank you so much Sir for your kind words.
They are hard working and they do this job happily.
Support us by like subscribe and share our channel
Thanks❤️
instead of automated process they do these sweat shops..... really labor intensive work prone to serious medical issues and accidents later
Thank you so much for your concern Sir.
But they already know how to work in this environment.
Keep supporting us by like subscribe and share our channel.
Thanks 🙏❤️
My lungs got hurt after watching this
I feel so sorry for those people, working in these circumstances. Very unhealthy.
Thank you for your support 🙏❤️
Jump'n Jesus. What's the life expectancy of a manufacturing employee in Pakistan, 28 years old? 7:40 That reminds me, I need some prunes..
Thank you for your compliment Sir
Keep supporting us by like subscribe and share our channel
Thanks ❤️🙏
Soon in Europe and USA
Sure
the saw thing was a bit much i get it. there is better ways to to grind plastic 😬but nice job though 😎😎
Thank you so much for your compliment.
Keep supporting us by like subscribe and share our channel.
❤️🙏
I have tried to plastic weld some bumpers some just don't melt so don't know how the piping is that much good
I appreciate your effort Sir
Thank you for your compliment
Keep supporting us by like subscribe and share our channel
Thanks ❤️🙏
Vehicle exterior bumper clips are number
5 polypropylene....not pvc (polyvinyl chloride)... which is a more ridged plastic that is used to make drain plumbing parts and pipes because of it's hardness.
Thank you so much Sir for your information. 🙏❤️
😍😍😍
I like all the safety they use just like in hell
Я щось не зрозумів. Вони труби для питної води роблять із бамперів? Щось я сумніваюся що бампери виготовляють із харчового пластику.
Yes you are right.
Support our channel by like subscribe and share
❤️🙏
Enjoy
Thank you 😊
Ist die Telefonnummer auf dem shredder vom Krankenhaus oder vom Arbeitsamt?
For the morgue...
That number belongs to the Shredder company.
Thanks 🙏❤️
Where do the bumper color layers go? Where does the putty from salvaged bumpers go? Why the guys are using sieve if both small and big fractions of the ex-bumpers go into same bucket afterwards?
Thank you so much Sir for your question
Some bumpers are removed automatically and some are still there.
Keep support our channel by like subscribe and share ❤️🙏
❤❤❤
Thanks
SURELY AS A CONTENT CREATOR, YOU COULD HELP RAISE FUNDS TO IMPROVE THE HEALTH & SAFETY OF THESE PEOPLE????
Sure Sir.
This seems like the most inefficient way to do Thus. They could cut out soooooo much work with just a handful of wheelbarrows or carts.
Thank you for your concern i appreciate it.🙏❤️
Pvc or abs?
bumper are made by PP poly pipe are made by HD pe I don’t what this video is talking about very misleading 😅
No sir it's PVC.
Gesehen gut
Thanks❤️
hope its for domestic use only, paint and other stuff contaminates the final product i highly doubt its uniform quality all the way
Thank you so much Sir for your support.
Yes this pipe is use in local domestic projects.
Support us by like, subscribe and share our channel.
Thanks.🙏❤️
In countries where human life is worth less than plastic pipes
Due to lack of resources they are bound to do this job.
Thank you for your support 🙏❤️
Wait aren’t car bumpers ABS?
Beyond the environment of no safety, unions in this country would be out of their minds over actual work.
Thank you very much for your compliment Sir, we'll do our best for labor safety.☺️🙏
aren't bumpers made of ABS?! ACRYL-BUTYL-STYROL
Thank you so much for your compliment
Support us by like subscribe and share our channel
Thanks ❤️🙏
More child Labor, send your kids to school ffs.😢
How long you can work in this factory before cancer kills you ?
There must be a lot of microplastics in those workers' lungs.
Maybe not
It is not PVC, you can't make PVC from car bumpers. Car bumpers are typically made of Polycarbonate, fiberglass, steel, and other materials. PVC is not among them. It is impossible to create PVC from any kind of the step in the video.
How do they collect in enough quantity?
From car repairing shops.
It is also not car bumpers they are starting with. It is bumper covers.
It's car bumpers brother 🙏❤️
Don’t need no stinking guards
No safety of workers.
They do not have enough resources to buy safety equipment.
Thank you for your support subscribe and share our channel.
🙏❤️
Life expectancy with all fingers and limbs = short
And People wish to so Entilted to whine about America. Instead of Hating each other, we should All Hate Injustice and Inequality.
Now a days it seems that PVC is used as a generic term for plastic pipe.
Maybe you are right Sir.
Keep supporting us by like subscribe and share our channel
Thanks ❤️🙏
27,000 die from industrial accidents per year in Pakistan, in U.K. 138 in 2023!
Thank you so much Sir for your information.
Keep supporting us by like subscribe and share our channel
Thanks 🙏❤️