vertical lines on the color tv screen no picture
ฝัง
- เผยแพร่เมื่อ 13 พ.ย. 2021
- for. tv software. or tv box android firmware. or radio code. or more. go here repairalltv.com/
how to remove radio code. you can download tv software. EEPROM radio and many more - ยานยนต์และพาหนะ
Another great instructional video, My customer has a Sharp LED LCD TV LC-50Q7000U
(2018) model basic smart tv with the same problem - cover pins 1thru 8 with electrical tape does the job every time 😎- language has no barrier in understanding electronic AC/DC principles 👍🏼
Thanks again my Brother from another Mother!
This just worked for me. I didn't understand what you said but understood what you did. Thank you 🙏🏼
What the heck how the crap does that work? Why wouldn’t that part be covered from the factory on every TV. I’m no TV repair expert but this seems fishy.
Cuss or don't try
It will work but not all the time.
Also, there is no settings on factory mode to fix it because it is a hardware issue. And if there happens to be, you still cannot adjust it because the factory mode OSD won't pop up.
Legend!😱💪🏼✨ Almost wanted to throw my tv away but this was the fix 🎉
Great fix getting more common that fault is now I’m getting so many dead screens
How many lines should i cut... I have Omega 40inch is doing the same
Work is good,thanks for sharing sir,watching from the philippines..
Спасибо за ваши знания
I can't believe it, it works for me as well on an Phillips ambilight TV
Thanks you so much !
Grazie per il tuo prezioso video!
Nice information sir 👍
Well done! Thanks.
Thank you very much, sir, for the useful explanation. I have the same problem with my Philips 50 TV. Please help
Me too did it work for u?
Fantastic it worked thank you! But i have some slightly visible lines how do I know with numbers of lines to cut. Thanks!
Amazing review 👍👍👍
Beautiful ❤️
Très bien 👍👍
Agradeço pela dica, minha televisão voltou a funcionar
Really beautiful..
Thank you sir. Was able to fix my tv
It’s works, it’s really works! you just need to cut the right pins.
Beautiful❤
thanks sir very best video very best knowadge video hi
I don t know how this sorcery works but it worked for me as well god bless
Good work friend👋
how many pins you cover??
Thanks 👍❤
my TV also same problem will try and revert u sir
To this day, manufacturers haven't resolved those shitty lines on the screen
good job mate.
Beautiful
Hi all, What the port called at the bottom of the screen? It connect to the t con board and then run a ribbon across 4 different skinny boards
Excellent 👍👍
What is the logic behind this repair? How it is possible to fix the screen while blocking signals?
เรียนซ่อม อิเล็คทรอนิกสื แล้วจะรู้เอง มันเป็นการปิดกั้น vgh vga ฝั่งที่มันช๊อตกันไง
Thats what I would realy like to know
Think there is a short on the screen and this is blocking one side of that circuit, preventing the short from completing. Usually this takes trial and error blocking different sections of the ribbon cable to find the bad section.
Although ultimately the tv still has a short - and a potential fire risk but yes it works - I have a Hisense 50” doing the same but I’ll scrap it as I’ve ordered a new tv with 2.1 hdmi - but nice video m8
wow !!! perfect
Have a Insignia 55df710na19 changed the led strips now have a line down the middle of the screen can you help !
Good job!
Ako vedel ze ma zblokovat tu cast a kolko pinov zablokovat ?
Thanks very much
thank you
beautiful
Show as and tell us how many pins on the ribbon that u blocking the signal from t- con board...what are the signal u have blocking?
8 lines
@@chronikhavok3407 what signal he has blocked ?
CLK signals
Bravo shqipe
Good job
BRAVO
How do I know what ribbon is causing the issue?
Hello, do you have a good idea for how to remove a philips tvc screen that is glued. I just broke a Philips TV 50pus screen, it was very firmly glued and used a plastic card to free the glue. There was a corner very difficult. The result is the screen is broken. Do you have a really good idea for how to peel off a firmly glued TV screen without it being damaged. Many thanks for your help.
Heatgun
amazing
Yes
Boa 👏
Guerreiro caso o amigo esteja querendo salva a TV de uso próprio e economizar SHOW, RECOMENDO, porém caso seja um técnico iniciante com pouca experiência e pegou aparelho de cliente, não tente, infelizmente em 95% casos o televisor apresentara defeitos em menos de uma semana.
Thanks
Здравей, къде се загуби ? Хубави клипове и полезни правиш
Eccellente
Merci sur un téléviseur j'ai déjà vu que cela avait été fait et maintenant la panne est revenu.que dois je pour revoir les images.❤❤❤❤
Wanderful
Pershendetje zotri nje pyetje nqse me lejohet kur hoqe tenien e pare pame nga nje krahe e bardhe dhe tjetra e zeze dhe kur hoqe te dyten po e njejta gje por e kunderta ku kuptohet qe fain e kishte e dyta dhe ku mund te vendosesh tenien faleminderit
I ke 2 lidhse majtas djathtas. Cilen e largoj nuk pat drit dmth zi
i dont know what you said but i understand
What if I have this with picture? How do I repair?
I'm coming watching your video
Nice
Oh nice
What don't you explain please ?
nice
just because the fuse is ok it does not mean the TCON is ok.
cut ckv?
👍👍 16 👏👏
so did the trick with the tape,worked perfectly,however after about an hour the picture is overtaken by another picture,while its on in the background and then its on a loop every 30-45 seconds.any ideas???????????????????
try to cover more lines. if it doesn't work, try to cover less lines
👍👍👍👍👍
Mine audio went off tried all but nothing works
I tried this but it didn't work for me
It works👌👌👌
Good
🙏👍
Hello my friend
Ma bravo i kod mene proradilo samo sam previše stavio trake pa malo jebe hdmi..ali bravo
Wow
Well
Plz unlock your subtitle.
new sub her ..thank alot
Super sir
I wonder which language he does speak? And what is the explanation for the fix?
albanian
Gd
Very funny.
J’ai fait un mais c’est toujours la même chose
try to cover more lines or less below or above the ribbon
I had the same problem with my toshiba 55L5550EE. I followed your advice, and the image reappears. But I have a single thick vertical white line on the right side of the screen. 8cm from the right edge of the screen. I ask for your help. Thanks a lot.
Have you tried covering up different areas and cables, could be a broken with the board as well, I'm not a technician.
I guess cover more or less of the ribbon???
Fool the technicians
Location mo boss?ganyan din ang sira ng tv qu
Malapit lang boss, russia
What is the explanation?
@BLACK NIGHT yes. But with the added tape, the pins don't make contact any more in the connector
@@khalkhal2372 I guess these pins caused a short and error in tcon board. When covered they dont make contact with tcon board so no short (or fault) detected.
@@Tsjoetenbille " I guess ?
@@pascalphase2556 Well, it’s a common fix. Many video’s on this topic. It bypasses the clocksignal to the panel. But i’m not shure what causes the fault.
Спасибо за ваши знания
I will fix my Samsung
He should of just said take it to a shop
Beautiful ❤️
Beautiful
Nice
Good
Beautiful
Nice
Nice
Nice
Nice
Nice
Nice