Remote wireless trigger Godox AD600 Pro With Flash Sync | MARKUS P PHOTOGRAPHY
ฝัง
- เผยแพร่เมื่อ 16 พ.ย. 2024
- This is a way to wirelessly trigger your AD600 Pro flashes (applicable to other flashes as well) via remote trigger and get flash sync at the same time.
I tried using the Godox XPro together with the X1R receiver, and that triggers the camera and the flashes, BUT, they don't sync!
Therefore I dug up my old JYC JY110 radio transmitters that I've had for 7-8 years. Bought them on eBay for less than 20 bucks, and together with the Godox XPro they work just fine for what I wanted to do.
---
I usually do my TH-cam videos in Swedish but I will try to squeeze in a few in English now and then as well. This is my first try! : )
---
All content © Markus P Photography
www.markusp.se
![Godox XPro TTL Flash Trigger [REVIEW]](/img/n.gif)
It takes an extra a Godox trigger to set off the X1R and leave the Xpro on top of your camera. Likely you solution is cheaper than purchasing g an extra trigger but it does work with only Godox receiver and triggers.
Do you have a link to something that shows this setup you're talking about? Have you tried it? I'm not really sure on the complete setup you're talking about...
The flashes have built in receivers, but I need some kind of receiver to trigger the camera. And for that I used the X1R, as recommended. But as you can see in the video, camera and flashes don't sync even though they are both triggered.
Fotograf Markus P yes it is covered in the Godox Manuals but it is not really clear. You have to have two transmitters:triggers. One in camera to trigger the flashes and one in you hand to trigger the X1r. The must be on separate channels to not interfere with each other.
Thanks. Does HSS work with this set up?
Interesting question, I haven't tried it. Will do and post the result!
@michaelscoots I can confirm this setup works with HSS. I just set the sync option to HSS on the Xpro and fired away at 1/8,000 sec. Everything synced just fine.