DIY - Wood Floors on a Budget - Plywood Floors - Affordable Wood Flooring - Home Project
ฝัง
- เผยแพร่เมื่อ 4 ธ.ค. 2020
- Hey y'all!
I have a little DIY for you. This is how we did our floors and we absolutely love them! This video will show you step by step how it was done.
Hope you enjoy and learn something new! (PLEASE SUBSCRIBE! It would really help! Thank you!)
We could of sanded the wood and stained it after putting it down, but this time we planed it, sanded it, and stained/poly'ed it then nailed it down.
If you have any questions post them below and I'll try and answer them.
They look so much better than laminate floors boards! (I'd wear gloves for the staining though)
Floors look great
Thanks
Great job! Now that you’re done with yours, you can come to my house and do mine just like this 🤣. I’d love this in my house!
Any time!
1:20
Using a BRUSH is easier...
I learned that the hard way.... LOL
WOW
Excellent Job!!!!
I wish I could buy you some Knee Pads...
Great Video ... Thank you for sharing this.
Glad you like them!
Love this!! They look great! We are getting ready to do most of our house because I am sick of carpet. I wasn't sure if I could stain and seal before bringing them inside. I have two parrots an the fumes are so bad. Super helpful video!!
Thank you !!
& good luck!
That looks really good! Have been considering something with plywood for my bathroom. Gotta try this. I wonder if my Porter Cable pin nailer would work on it.
My husband used a small nail gun. He said a pin nailer wouldnt work because a pin nail doesnt have a head on it. The nails he did use were quite small but they did have a nail on it. And he also used glue.
Beautiful end results and the process doesn't look too difficult. How wide did you cut your planks?
Hi! They are 8 inches wide.
It looks amazing ! Is subfloors where you are installing the plywood floors cement? And How did you level the floors before installing it? Thank you !!
Hello there! Sorry for the late response! The sub floors are not cement. And to level it we used lathe and floor leveler, Which both were purchased at Lowe's. On a sub floor, You locate the low areas and nail or staple lathe in those spots and then pour the leveler, but if you are on a slab, Its just a clean up and then brush on some latex concrete primer and pour leveler.
Hope this helps!
Did you put the nails straight up and down or at a slight angle? I love the way it turned out.
You can do either. But I glued the floor, as well. I personally went straight up and down. I would suggest using glue in addition to nailing. You also dont have to pull the whole floor with glue as I did. You could liquid nail it (caulk gun). The reason I spread the whole floor with glue because its cheaper. You dont have to use really long nails. You would go by how thick your wood is, An inch or inch and a half should work. Thanks for your comment!
Hi Michelle,
Did you have any concerns about any gaps? What type glue did you use?
Thank you, Chris
Hey Chris! The type of glue we used is Tightbond 231 Select wood glue from Lowes. As far as gaps, I beveled the edges with a router but you could use a sander. Slight bevel with v bevel bit. The name of the bit is chamfer (45 degree). Just lightly bevel nothing extreme.
Thanks for the informative video. Can you please tell me what colour of stain you used?
We used Jacobean.
Would it be better if I polyurethane the wood after is down on the floor so it would seal the cracks as well, so when mopping water doesn't get in the cracks
Hi! Yes, you can most definitely do that if you choose. The reason we did it the way we did was because of the poly smell.We also didnt have to stop using a particular room waiting for dry time. And we could do it at our leisure instead of all in one day. But yes you can do that if you so choose. Good question! Thanks for asking!
How have these help up over the past year? Thinking of doing something similar.
Hi! They have held up pretty well. We knew they would. We chose this way for affordability but also durability. Our three boys still live at home and they are hard on our floors. The floors look just like they did the day we laid them.
Do you know what stain color you used?
Jacobean
@@JalynnPatterson Awesome! Thank you for being so quick on the reply. Any issues on the floors or anything different you would do now knowing what you know.
Nope! Everything is still going great! We may need to do an updated video soon on this one--to update everybody!
So, a year and a half later, did you have trouble with brad nails sticking out?
No we have not.
@@JalynnPatterson Cool! thanks for the reply. That makes me more confident going ahead with my own project
How did you stagger the plywood ?
Hi,
My boards were 8 ft long and I cut them in a stagger--7, 6, 5, 4, 3, 2, 1. Thats each board to start with and as I cut off the opposite end I used the cuts as a starting rack. Which will also be stair stepped and you keep doing that so that no wood is wasted. I only cut the first 7 boards like that, the rest came of the cuts came from opposite end pieces.
How long were the pieces
Whatever the length of your original board size is. And then you would cut the length as needed.
What size nails did you use?. Thank you.
We used the roughest plywood. It was 3/8 in plywood. So for that we used a 18 gauge 1.5" finishing nail. Depending on the thickness of your wood would determine nail size. But these are our specific measurements.
Great job however I would have used a better quality plywood grade.
We are actually happy with our plywood choice. Thanks for watching!
It sure is going to be a fun job when someone has to tear that back up 10 years from now 🤣
Could do without music
Good to know!
Love the Music