Canon MX922 not printing - I found the SOLUTION!!
ฝัง
- เผยแพร่เมื่อ 13 ก.ย. 2024
- Canon MX922 not printing - I was having the same issue like everyone online with not been able to print from the bottom cassette tray. I have found a solution that works for me. I hope this helps many people out their having the same issue. Click to watch!
Thank you so much! I was involved with 5 different people from Asurion tech support yesterday. Not one was able to help and then they refused my claim for a bogus reason (not worth explaining) even though I bought their insurance policy with the purchase of the printer on Amazon. I gave up in frustration but gave it one more shot today and was lucky to find your video. Again, thanks.
Wow! I’m sorry that happened, Eva. I’m glad the video helped!
I had the same problem, the two grey rollers in the back weren't loading the paper. It would spin but the paper would not catch. I removed the rubber wills and scuffed the rubber up with some sand paper so that they weren't smooth and this did the trick for me.
THANK YOU NANCY! Positioning my paper hard to the left side and firmly positioning the slider to the left allowed my printer to print. Until I watched your video I was ready to add my printer to the landfill.
Yay! I am glad it worked out. :)
Oh my god I cannot thank you enough for this. The solution is something as simple as it is easy to overlook. Searched through tech support logs for a long while but no one suggested this one simple thing.
You’re so welcome!
Oh my goodness! Your tip saved me from having to buy a whole new printer! THANK YOU!
You are so welcome! 🙌
Thank you Nancy! I had the same problem, only mine was always on the "Letter" paper choice. But, apparently snugging the paper tray guides did the trick! Your video was very helpful! Thanks!
You’re welcome!
This was so simple, I didn't believe it would work, but it actually does! Thanks much.
Yay! 😂
So this didn't work for me about 15 times, and I was ready to give up, and then I jammed the paper in kind of badly, where like 3 sheets were sticking up at the back about half an inch. WELL, IT WORKED. It grabbed 3 sheets and only printed on one of them, and it missed the first page for some reason? But, it did work!
Your video gave me the patience to mess around with this for so long. It's important, because it's a Christmas letter to my mother, who is dying. So, huge thanks to you for helping us get this sorted. Now I just need to print the first page. XD Wish me luck!
This totally worked. I was trying to print a 4 x 6 picture so I changed the settings to a 4 x 6 photo and it finally printed. No other you tube video helped, but this one did. Thank you for doing this. I will now change the settings on the printer back to letter size. Wahoo!
That’s awesome!
had this same problem.. was trying to figure out if there was any additional paper tray.. LOL, the problem was the DOCUMENT, not the printer for me.. the document printer on my computer said 4x6 not LETTER so check size on your computer when you hit print. BUT this video made me feel better and not such a Dummy about operating this machine. So THANK YOU Nancy =D
Hi Diana! This has been the worst printer ever. You're so welcome!
Thank you Nancy, Your remedy saved lots of time and frustration. Thanks also for trying to learn what was up and letting everyone know!
Tom
My pleasure
I'm in the 'I can't believe this worked' group. Thank you.
Woohoo! So glad it did
I'm very glad I found this video!! TO THE POINT!!! I was getting very frustrated with this printer regarding the upper and lower cassettes. It was just given to me and they never used it but the manual was not included nor is it user friendly online. You would think this simple fix would be in the manual online for such an expensive printer. My HP printer was not this difficult to set up or figure out (the ink disc went out). That's the only reason I'm not using it.
THANK YOU!!! For saving this printer...lol
Also, I had to change the print setting "Letter" on my mobile phone to print correctly.
You’re so welcome
A year ago (see below) your suggestion of firmly positioning the adjusters worked for me … again, thank you so much.
However, for the past number of hours I've been trying to get my printer to print but to no avail.
Then, another person overlooking the situation suggested I may have put too much paper in the tray although it was just about half full.
Nonetheless, I did remove half the paper and … guess what … it worked!!!
What a circus! This is my last Canon product… never again.
Great tip!
I'm with you. Can't get mine to print either. Printed fine yesterday for project, then stop!! Have tried all the suggestions, nothing works!!
Thanks for the video! I've been trying everything to get it to print. From restarting it, to removing the print head and cleaning it, to replacing cartridges.. who woulda thought, aligning the paper tray would fix it...
You’re so welcome!
I know this is an old video, but I just came across it and just like you said, my settings were not on Letter. I changed that and I'm printing again. Thank you so much Nance!
You’re so welcome, Linda! 👍
The fix you suggested does work. I also make sure the paper in the bottom tray is pushed to the back of the tray with the top of the stack as the leading edge. And I make sure the printer is on a level flat surface..
So glad it worked. Thanks 🙏
This is embarrassing, but I did not even know about that lower tray for paper. I just bought this used off of Facebook because I can use all the ink I bought for my printer that just died. I thought the paper went in the top... still have to figure out what that is for! Thank you, you helped me in the first 1.5 minutes of your video, too funny.
Ha ha ha you’re so welcome!!
the top tray is to automatically scan in papers to create either an electronic file or to make copies of the papers
Thank you! I got my printer working again, although mine says no paper in the lower casket but I used the same setting and set it back to letter size and boom it worked.
Yay! I am glad it’s working for you!!
I have been trying to print for an hour. The moment I followed your steps. I am able to print. Thank you so much for posting this video.
Yay! I’m glad it helped!
I end up getting a new one... This printer sucks!
But thank u for trying to find a solution to the problem...
You’re so welcome!
You are a GEM! Everyone suggested solutions that were complicated and ineffective. How did you think about paper alignment? What a score for those who are unclear about possible remedies.
With all due respect, have you considered brain surgery as a second career? Thanks again for sharing your expertise.
Ha ha ha you’re so welcome, Pamela! 💕
I finally solved the No Paper error 1008. The problem was the gray slider in the bottom paper tray (at the end of the tray close to where your hand was when you pulled out the tray, not at the side) was all of the way back on the A4 position. Before you put the paper in, move the slider to the next position (the Letter position). That fixed the problem for me.
Oh good to know. Thank you for sharing!
I found one at Goodwill. I was doing everything wrong. Thanks for the help
You're so welcome!
My MX922 kept telling me to load paper when there was clearly paper in it. I found another video that says to clean the rollers (the option to clean rollers on the printer settings did not work for me) Take out both trays. Turn the printer on it's side. Rollers are right there and easy to get to! Use an alcohol wipe and while turning one side wheel, wipe the alcohol wipe on wheels to clean. My printer now works again and will print fantastic 4X6/5X7 borderless photo sheets which is the main reason I bought it :) Try it!
Great tip! Thanks for sharing!
My printer had a no paper error. Thanks for the tip. I did just as you said, clean the rollers and now its working just as before. 🙃
thank you this suggestion fixed my blurry printing and i was about to buy another printer. thank you
You’re so welcome!
Thank you Nancy!!! Saved us from spending money on a new printer. You Rock :)
You bet!
Thank you so much... it work... i was ready to buy a new printer. You are a life saver.
You’re so welcome!
it actually helped. The printer really has issues with pulling paper from the tray.
Oh glad it did! Yes, I do agree with you!
Tried it the second time..it worked perfectly! Thank you ever so much..
My pleasure
I followed your directions - tabs corrected and checked to see if it is set for letter size. Still not printing. It feeds through printer and I can hear sounds like it’s printing. Indicator lights suggest it has plenty of ink.
This is so frustrating! Nothing on the paper.
Ugh! Thanks for your video. I’ll try it again later. Maybe when Iam not so frustrated
Yeah it’s pretty frustrating! I’m so sorry
My issue was the letter setting. I'd magnified something earlier and forgotten to put it back to the standard letter setting. For those who are still having issues after adjusting the settings and tray, apparently one of the recent Microsoft Updates has affected many computers link to printers. Some people have achieved success in restoring the print function by going back to settings before those updates. That's beyond my scope, but I have first hand knowledge of people who've succeeded.
I just purchased a different printer. I can’t believe all of the issues that I had with this one, lol
@@NancyBadillo Do you print Photos? I keep my 922 loaded with $$$ photo paper. Did you find a printer that prints photos as well as the 922?
I'm starting to have issues.
@@NancyBadillo It has to be an update by Cannon or Microsoft. I am so sick of these problems that I could literally throw this thing against the wall. I've never had these problems before so either the incompetent Microsoft needs to fix it or Cannon! I am almost ready to switch to MAC too, can't stand Microsoft, they're very incompetent! Thank you for at least solving part of the problem! I would never have looked at that as the issue!
It doesn't hurt to install the new drivers that Canon has on its site for 920 series printers either. The newest date as of this writing is Sep 2021
Thanks for sharing.
I saved your vudeo. Good infirmation! It resolved my problem!
You’re so welcome!!
The solution in the video didn't work on my printer. However, one of the comments said to go to the Maintenance Menu and select the Clean The Roller option. I did that and now the printer is working/printing just fine.
Yay! 😀
THANK YOU!! I was about to break it lol 🙏🏽
You’re so welcome! Lol
This printer is awful! thank you for sharing that info, it was helpful. I also found on mine, I have to make sure the printer chosen is Canon MX 920 series, not Canon MX 920 series 2.
You’re so welcome!
Thank you your video helped me tremendously
You’re so welcome 😉
Wow....worked soon as I tighten up that side tab.....Wow....I appreciate you Kween...! Thanks ...!
Yay! It's so weird that one simple trick helped!
This worked for me thank you so much!
You're so welcome, Lauren! So glad it helped!
Thank you Nancy, finally able to get my printer working again🎉🎉 lol I was just getting ready to say forget it and buy a new one lol🤦♀️🤣😂
Yay! I'm glad its working!
Nancy you are simply thee BEST!!!
Thank you, Keida!
Great Information!! Thanks, Nancy!!! Awesome Video!!!!!☺
You’re so welcome, Jarvis!
Thank you sp much for sharing what you learned. I tried this trick less than an hour ago and the printer is working perfectly!
Yay! 👌🏼👌🏼👌🏼
Well is that not CRAZY! I had been doing a hard reset; yet, I would get errors, then your video reminded me that my last print was a 4 X 6 card; therefore, I changed the print size and it worked! Just amazing how you can learn from others who figure things out!
Thumbs up on the video!
Now learn this; the way to heaven is to just look up to GOD and tell HIM directly you now place all your Faith, from all your Heart, in the Death, Shed BLOOD, Burial and Resurrection of Jesus Christ to PAY IN FULL all your past, present and future sins against GOD IN FULL! Once GOD hears and see that you are all in, then GOD puts the Holy Spirfit of GOD in you and gives you Eternal Life Forever!!!
Much love to you!
So glad it worked!
@@NancyBadillo Are you a believer in Jesus Christ and what he did to save you from Hell?
Much love to you!
So how my printer was disconnected from my router/modem. Finally got that fixed and now it keeps telling me I have no paper in the upper cassette. I don't have an upper cassette.😕
I just did the steps you showed again, but this time I took all the paper out and slide the bar all the way in and all the way back out. Added the paper and then slide it in so it was up against the paper and it worked!!!! It fixed the issue.
Thank you so much!!!! I very much appreciate your help. Thanks for posting this video.
Mines not wanting to printer from the lower. For some reason is say i need to put paper in the upper cassette but I’m not trying to use that one 😭
Same! How did you fix that?
thank you so much this just help me for my printer.
Awesome!
Thank you great help. Been a bit nightmare to try and fix
Yes, it has been the worst printer ever for me.
THANK YOU SO MUCH for this video; it helped me tremendously!!!
You're so welcome!
I've done all this but there are still lots of times that I have to repeatedly take the paper out and reinsert. Over and over and over and over and over and over and over and over and over and over and over and over and over. Argh 😡😡😡
Hi all, just discovered that this issue may have to do with the format that you’re sending in the print job in. What I mean is, I was trying to print photos from my phone and the printer kept trying to print from the “upper cassette”. Then I saved these photos as pdf into my “pages” on my iphone, so the phone would send these images in document format and it worked! Mind you the prints were much smaller than the size of the paper, which kinda confirms that the format it is sent to the printer in is the issue.
Hmmm. interesting. Thank you for sharing!
Thank you your comment is the only thing that has helped me to solve my frustration for the last 2 hours!!! Thank you so much, Mrs. Stephens
Thanks dear your comment really helped me 🙂👍
THANK YOU SO MUCH!!! You the bomb
I keep getting the error # 1007. Bottom line, I cant print from the bottom tray. I followed your instructions to the letter but it still isn't working for lower cassette with letter size paper.
It’s so irritating. I’m sorry it’s not working for you.
Very helpful video! Thanks Nancy!
My pleasure
Nancy, I had to update my Firmware, which is easy to do. I put my small envelopes in the upper tray and it printed.
Hmmm interesting did you go the site to get the update?
@@NancyBadillo go to the MENU and select SETUP. Go to the left option, DEVICE SETTINGS. Then scroll down to FIRMWARE UPDATE. Will ask if you want to connect and update. Hope this solves the problems.
@@flkamm Awesome! Thank you.
I have a mx925 and believe me or not it worked 👍Thanks.... God I hate that thing.
😉
You made happy my day. Thank you so much.
My pleasure 😊
This was helpful to me too. Another commenter stated you have to check the paper size on the computer. On my Mac after I hit print, there’s a more options setting that allows you to check paper size. It was set to 4 by 5. This was my first print out of the box. Very helpful. Thank you.
You're so welcome, Steve.
Unbelieveable.. the first step was my problem. i added paper and secured it in the tray as she showed us to do and perfect copies came out.. nothing was printing out before... I AM SOOOO happy.. thank you!!
THANK YOU THIS WORKED!!!
You’re so welcome
Thank you! Worked for me😊
So glad to hear!
THANK YOU! so helpful
You’re so welcome!
This printer is such a piece of junk
Not the best for me either.
Does this all the time! Ugh
It’s rubbish.
From the time they were I've had at least 8 brand new ones and 2 used. On my last one now. This is the raggediest machine to ever be created. I got a awesome deal on ink years ago and have a stock pile of ink now. Which is the only reason why Im still using it, that is, when it decides it wants to work. Just a huge clunker in my opinion!
thank you so much!!! huge help!
You’re so welcome
This does this because the print heads are wearing out, I've had this issue for a few years, where it wouldn't always catch the paper, and I'd have to take the paper out and put it back in, or add extra sheets so it could grab the paper, I've had this printer for 5 plus years, It started doing this around year 3, I just assumed it was because it only did it when I had one sheet at a time it just wasn't grabbing the paper, But if I put more than one sheet or just take the tray out and push it back in, it would miraculously grab it and print . 2 days ago it did it again I've been working on (fighting with it) ever since, the rollers I am 99.9% sure are shot no matter how much paper or what type of paper I put in it, it will not catch and pull the paper through therefore seeing the tray as empty It has been doing it more often in the last 4 to 5 months beause I have been using it a lot more than I used to, used to print maybe 3 times a month and not even every month a ream of paper lasted me 2 to 4 years, because I didn't print much, and when I did it was mainly pictures from the upper casset I started my own business a year ago and over the fall added in Candles and wax melts - I print my own labels so I print 8-15 sheets every 2 days in the last few months. The printer is shot nothing works I cleaned the print heads, and they spin fine they just won't grab paper even when I put about 30 sheets in the feeder! Bought a new one off Amazon, waiting on it to be delivered now so I can get back to work.
But I suggest just buying a new printer instead of fighting with it, it may work fine for a month or even 2 months then it'll start doing this again, that's if it doesn't do it after every other sheet!
Also, you do not need to change the paper size on the printer itself, Leave it all as default, you only need to change the size of what you're printing on the device you are printing from /through the software you are printing from, and of course, if you're printing pictures that are only going to print from the top printer tray be sure to have the picture paper in there before printing. The printer will automatically print the right size and from the right cassette without manually changing anything on the printer itself.
Thanks so much
If you tried everything, and nothing works, try unplugging your modem for a few minutes - then plug it back in. Because the printing process is Bluetooth (in my case), the modem has been the culprit on a few occasions. Unplugging the modem was the required fix....
Thank you for the amazing tip!
Thanks for the info but this is the worst printer I ever had./
Albert Soberanes agreed
In the bottom tray in the back right side bottom, you see a gray slider with the paper definition printed on the tray, you need to move that slider up a notch
Thank you this helped me
It’s my pleasure
Yup! Good info! Much thanks!!
My pleasure!
It didn't work for me. I tried everything. Still researching how to make the printer sensor detect the paper that is in it. Same settings. Double checked. Same tray settings. Same paper. All I know is after I used the last paper in the tray, "The Printer Needs Paper" message came up. When I refilled the tray, checked all of the margins and settings, it hasn't worked. So dumbfounded.
I'm so sorry.
Thank you it was my problem
So glad it helped!
Hi do u have a video on how to get paper out if its jammed?
Hi, unfortunately I don’t. It’s quite hard to take it out. It has happen to me. When I had the paper jam it was in front section so I went through as if I was adding ink and pull it out. You have to be really carefulz
All you have to do is take the back off, you see the paper, grab it and shake it out!
latjuan wells same. Opening the back allows you to just pull out the jammed paper super easily. Now for all the rest of the issues...
Great demonstration
You’re so welcome! 🙌
This is my problem too, thank you, however, it won't stay on the standard sheet size. I have plugged and unplugged the printing hoping that it would set but after I queue it up, it flips back to magnification 100%; I am so p***** off, have work to do and still messing with this piece of garbage! It never did this in the past, why now? It must be an update causing this, don't you think?
How do you adjust the colors? Ive had this printer for a couple of years and have barely used it. My problem is; When I print, the colors or picture I am trying to print is tremendously faded. How can you adjust the print settings? Ive gone through alllll the settings, paper type, etc. Has anyone had similar issues? What are your setting set to Nancy?? I even bought new ink cartridges, so I know that is not the problem because this is my first time using the copier since I refilled the cartridges.
I don’t have it any more. Sorry!!
My MX922 is an absolutely terrible printer for photographs - at least that has been my experience.
i have the same problem but with the upper cassette could u do a video on that?
I'm sorry to hear. The printer at the moment is not working for me. :(
These steps didn't work for me. It shows my paper is on letter size, but I'm still getting tiny font when printing.
I'm sorry to hear, it can be so frustrating.
Ty for sharing. Glad I found that video. I was struggling with that issue for month. Your video was concise and on point. Tu so much
You’re so welcome!!
Thank you but it didn't work for me Ugg... What worked for me was plugging it up to the computer and I found that it was the air printing that was giving me the 1007 code so I can troubleshoot the air print issue later
I’m sorry to hear.
Thank you soooooo much
You’re so welcome!
It worked for me, thank you
It’s my pleasure!!
Muchas gracias me has ayudado Gracias por el video mi Bella.
De nada!!
How do you put I'm latest software
Hi there! Are you looking for the latest software?
Shame Canon can't fix this problem if so many people are having the same problem.
I know, right?
Also if u are using a smartphone change the settings on the app.
Oh good point!
Thanks!
It's my pleasure.
Omg!! I’m starting to hate this printer!!! , I’ve had this for a couple of years and now it’s starting to mess up!!! I’ve done all of these but it didn’t work for me 😔...
I’m sorry you’re having this issue. I know that mine seems to be working fine now but periodically it starts to have the same old issues.
Its still the same, i am trying to fix it, whatever it could.. but i gave up😔
Thank you that helped a ton.
You're welcome!
To add on: Make sure you check the printing settingson your computer, laptop or the canon app on your phone match the print settings on your phone. What happen is that the print settings automatically or maybe by mistake change to a different paper size and it will give you this error because it's anticipating a different size and/or type of paper
Sorry for the typo. The print settings on your printer need to match the print settings on your computer, laptop or phone(if your using a app)
Thank You!
My pleasure
Hello nancy , my print is make sound but it doesn't print the paper are white 😭😭 plz help me
Hey Celina, I'm sorry to hear! I actually got rid of the printer. It was the worst printer I've ever had.
I tried this and it didn't work but the mistake everyone is doing getting focused on the printer saying there is no paper in the tray and checking it sometimes it can be that there is no paper in the tray but if you have the paper in and it stills says no paper in the tray try this. So, you know how when you want to print something a tab opens saying this is what you are going to print and it says how many copies you wanna do, there should be an option to change the paper size and choose 8 x 10 and then click print and it should work. I had the paper size before on 5 x 7 and it wasn't working and saying there is no paper in the tray but then I changed the paper size and it worked. I don't if you guys knew this already but for the people who didn't I hoped this worked for you guys.
Thanks for the tip!
Very appreciated!!!
You’re so welcome. Did it work for you?
Great share! Thanks!
My pleasure
life saver!
Yay! 🙌🙌🙌
good video, mine is just stuck won't get past the error.
Oh man! I’m sorry!
You are the best !!!!!!! TY !!
You’re so welcome!
Great help! Make more videos please@
❤️❤️❤️❤️
Thank you so much !
My pleasures.
It worked!!! Thanks
Glad it helped