ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
The Only Giant's Foundry Guide You'll Need! - New Smithing Training Update In OSRS!
ฝัง
- เผยแพร่เมื่อ 6 ส.ค. 2024
- Smithing FINALLY received an update is OSRS. Come learn everything there is to know about this new activity: The Giant's Foundry! / kaozbender_
Become a member: / @kaozosrs
00:00 - Intro & Disclaimers
01:10 - General Information
02:13 - Location & Requirements
02:40 - Is this Worth Doing?
04:24 - The Mechanics
08:47 - Making a Sword
10:13 - Exp, Points, Profit/Hour
11:37 - Rewards & Points
13:38 - Sponsors & Outro
![[OSRS] BEGINNER Giant's Foundry Guide | DETAILED WALKTHROUGH | 100k+ GP/HR EARLY MONEY MAKER | 2023](/img/n.gif)
Hammer it, grind it and polish it… my daily routine, I’ve got this!!
Going through and watching old videos. Thanks for the help in the grind
loved the stream, loving the guide
you should have more follows
Great helpful video, thanks
I just got 99 smithing using a lot of foundry. I think like 1500 swords. You can easily make 230k xp an hour here with 14 adamant and 14 mithril bars. I was afking bloods on the side and still making a consistent 230k. It’s also just downright not expensive to do.
Helpful tips:
You gotta right click on the lava and waterfall and use the faster options than just the normal left click. Runelite can actually switch the options if you shift right click. I kept the faster options on left click. There is timing involved with using the fast heat/cool and slow heat/cool. You can use the fast options at first to save a lot of time and then switch to the slow options once you get close to your target for precision.
There’s some strategy behind the bonus click. Firstly you definitely have to use it because it almost always guarantees you will be able to move to the next phase without another round of reheating or cooling. Secondly you don’t have to use it immediately. If you realize that you’re pretty close to the next phase, you can wait and use it at the last second to ensure a big head start on the next phase.
Once you run out of rewards you can buy the 15 point double xp shit. I built up enough of this to get me to 99 smithing at blast furnace using gold ore at around 700k an hour.
All told including the gold ore boost, this method probably averages out to like 280k an hour from 70-99. Waaaaaaaaaaaaaaaaaay less expensive and click intensive than gold ore at the blast furnace the whole way
Very useful tips, thank you!
Liar.
How long would you say smiths outfit takes?
@@Straight_White_Fatherly_Figure tool me.8 hours
Yea boi! I might give it a try. Idk if I can do that quest to get my qp back hahaha much love bro!
Been watching your content lately and its been helping out a ton. Notable thing to mention is that you cant break down items that require only 1 bar to make(pickaxes, arrowheads, etc)
Thanks for another guide thanks
You do not need graceful, you get run energy from forging the sword!
Nice...fashionscape it is!
I guess I will try this seems like faster XP than regular smithing 😀
damn i missed the stream, but again great vid explained well Kaoz!!
Hello kaoz, I think you make great content!
THANKS
your awesome man love your videos and live streams!
Thanks Cody!!
The complexity of the process is related to the quality of the sword. The optimization is going to come from balancing the quality of the sword with the speed of making the sword. Simpler swords can be made faster. For example, 18 addy + 10 mith gives only slightly less xp compared to an even 14/14 split, but comes with 5 steps in to make the sword compared to 6 steps, which probably saves at least a minute.
Any idea on the other effect of the outfit increasing the speed at giants foundry I’ve seen that it’s meant to add extra completion but have no idea how useful it is and how much it speeds up the process ?
Was looking for a video showing it
the xp showed on ur the video aparently is based on low level moulds. the higher the pts (mould + alloy / bar) u have, more xp will give u. mithril/adamant with mid level moulds () is like 10k xp. high moulds give around 15-16k
My mom's about to use the phone I'll have to watch this again
I really hope this games interface isn't as rough as the coal tar quest
Ty for the info just started it and seemed to didnt do it right.. so now i do xd
Hope it helps! :D
Actually cannonball making isnt 2x as fast because it takes slightly longer to complete each smithing motion.
Do the catalyst stack?
If an ironman wants to make platebodies and then use them here, how many rune and adamant platebodies should one dump into the smelter? If I grab 4 of each, the first will add up to 16 bars, which leaves only 12 for the other (3 platebodies), meaning the ratio will not be 1:1. Does this affect the xp or does it matter in any way? Was thinking about dumping 4x addy and 3x rune. Would that work?
7 platebodies fit the 28 perfectly. I've been using a stack of mithril I've had laying around to get rid of
@@YouDropedSomeThing Cool. If I'm looking for xp and I got mith and addy plates, does it matter what ratio I use? Should I use 4 addy 3 mith or 6 addy 1 mith?
Edit: Nvm, did the calculations. You want as close to the 50/50 ratio as possible, So for platebodies 4 of the higher tier and 3 of the lower.
@@pepponi the best pts. are with 14/14 in each alloy, the items bar's count as bars used for the item less 1.
@@YouDropedSomeThing So wait.... We're saying that we want to make the ratio =28 bars....but a platebody takes 5 bars..... You and the video both made this calculation the same tho so is there something I'm missing? I even checked like rune platebodies also take 5 and I was initially scaling off mith so.... what's going on here?
Do you get xp for both steel bars when smithing cannonballs?
Yes you do
Any tips for UIM?
My best was 178 points 🤓
Maybe good to know, a faster finishing time won't give more xp/gp
Thanks for the vid! however as a UIM player am i correct in assuming this minigame is basically unplayable for us?
Somewhat correct unless you stock up on noted bars and unnote them at the chest :(
@@KaozOSRS yeh I thought as much :(
That isn't really a feasible option I'm afraid. Ah well that's okay I knew what I was getting into 😂
@@kylecurness2414 nonsense! UIM LIVE at priffdinas.
Why not do some zalcano and then bring your noted bars over to the foundry? Makes sense to me!
Even if you got ore you could easily unnote it and work them into bars at the bank there!
Bring natures and a fire staff to the mine next to the foundry. Mine and superheat iron and coal for steel.
Some UIMs buy armor from Al Kharid and run back and forth between there and the minigame.
is it more worth to make the bars into platebodies and them dump them? or is it better to dump the bars straight away?
I too am curious about that!
For max xp, dumping the bars is actually better. But if you’re purchasing off the GE, you will save a ton of gp buying platebodies vs bars. For example, 50k gp for 4 runite bars vs 38.7k for rune platebody. Since you need 28 bars, you’re saving 79.1k per sword created, if you were making them out of all rune (don’t do that, mix addy + rune for best xp).
@@Champs-ek7lh im an iron so im more interested in getting the most of the supplies i already have
It really depends. If you're grinding smithing and your bottleneck is at the ore stage, you're reducing the amount of mining you need to do per point of smithing xp but if you're already flush with ore then it's a pretty marginal gain for the added time
farm steel platebodies from the wildy and its probably even more money if you get more.
For the algorithm!
where are you frommm, your accent is awesome! also thanks for guide ofc!
Mexico :D
@@KaozOSRS She's right, it's a very cute accent
Are you better of making items out of your bars first then use them here? Smithing xp both times?
I’ve read that it’s definitely not worth doing, you get way more exp for using straight up bars over taking already made items here
As an Ironman that's the plan. As an unrestricted account there's almost no point in using this other than for the outfit for faster anvil Smithing and fashionscape.
Any one else find it awfully coincidental that osrs announced the foundery shortly after hydroneer s 2.0 update
Now i know jagex is well known for holding onto content for a while before releasing. What do you think? Who did it first?
@@memeberfunk2731 this HAS to be a troll comment
You have to be braindead to think that Jagex is competing with an indy steam game that will probably never peak 50k players
I still don't get it. A clan member said that this is profitable and easy to understand. So far I've heard that only steel/mithril alloy is profitable and even then it depends on the market that day and what items you're buying. It seems unnecessarily complicated. I prefer blast furnace because it's always profit all the time and that's easy to follow.
If you buy items of the GE then mithril/adamant it profitable. The giant's foundry strategy page on the wiki has table that will show xp and profit, as well as tables for which items are cheapest (which is almost always battleaxes, warhammers, and chainbodies) Which item to buy might change day to day, but the prices a fairly stable so there are always items that are profitable.
The biggest reason to do the giant's foundry is that it is by far the best XP/hour (@ 200k/hour) for a profitable method. It is only beaten by addy platebodies and 3-bar rune items, and even then only by 10k-40k XP/hour. Additionally once you buy all the items from the foundry store, you can spend the remaining points on Kovac's grog which is about 56.5k each. Which makes your GP/hour around 475k.
So compared to blast furnace you are making 2 times the xp, at the cost of some of the profits, but you also only need 250k gp as input cost per hour versus the 26 million that it takes to run the blast furnace with rune bars per hour.
100% chance i 100% spacebar'd the quest
The Plan
So blast furnace is still better with less effort.
yes genius
If you're buying the bars/ore, it's much cheaper and less brain dead.
Don't need to watch because I'm a sweaty mf. But here's a comment for the algorithm👍🏻
The Barrelchest anchor is almost the same as the colossal blade stat wise, it just uses crush instead of slash.
Same damage and attack speed.
The only real benefit will be MAYBE against a boss that is 4x4 or larger, but even then you are going to hit less than a godsword unless your strength level is low.
A maxed zerker with an AGS will hit 52 against a 5x5 boss, will hit 55 with the colossal blade.
The only real benefit won't MAYBE be against a 4x4 boss or bigger, it will DEFINITELY be good against one especially considering you need an Amradyl Hilt for an AGS
Plus I'm not so sure why you're doing bossing with an AGS - maybe leave the bosses to the pvmers?
Ty for infor g. Been stuck at Tempoross kc 61 only chest an soaked pages really. Kc till anyone else got book or pet? ^.^
I'm at 150kc without the pet
so i should be buying molds? jwjw
If you want to do this long term for all the rewards, yes. Buy them all first. They give you more points and all of them cost like 5,400 reputation which is barely enough for 1 piece of the outfit.
Jeez ... where is reward points , for sword ffs...
Experiende
Seems really not worth haha
If you already have 99 smithing and don't plan on using it for profit or anything this is dead content xd
Hello there i think pushing athummbnail as only guide ull need is a bit harsh as it is new content u cant tell about all the best ways to train and and the guide is so wuick and telling is so fast u cant even keep up about how you should do the minigame but good job and have fun :)
So many wins with revitalizing boring skills but honestly I hate giants foundry so much it’s my least favorite addition to the game in a long time
I downvoted, because it just feels like this whole video could've been 4 minutes, but it's just soooooooooooooo stretched out. Like come on man! Don't waste my time pls.....
this minigame is boring. only useful for ironman
skip this content if your a regular account. Your not missing out trust me. Way too click intensive for little to no reward. The outfit is a huge grind and is not worth it
The outfit is like a 8-9 hour grind, the XP gains from anvil smithing are decent, it’s far less click intensive than blast furnace. If you are a normal account and hate blast, this is very much a viable option for you. If you were gonna just do anvil smithing to 99 anyways there’s no reason not to spend the time getting this. If you have no problem with blast…then yeah this game mode is useless to you.