Bang & Olufsen Beosound 9000 CD player Laser change, Disassembly process and Repair guide
ฝัง
- เผยแพร่เมื่อ 25 พ.ย. 2024
- #cdplayer #repair #sevice #Bang&Olufsen #Beosound #Beosound9000
The most innovated product from Bang & Olufsen is BeoSound 9000. The fastest 6-CD changer in the entire globe. If given the chance to maintain its momentum, it would reach 100 km/h in just 5.5 seconds-quicker than a Ferrari starting from a standstill! The display text can be positioned in a variety of ways, and it automatically adapts such that it is readable. The device also has an FM/AM tuner with RDS and new MasterLink connections, allowing it to be directly connected to the Beovision Avant and AV9000.
In this disassembly process episode we have Bang & Olufsen BeoSound 9000 MK1 version. Throughout the procedure, all components are separated and shown. Additionally, the BeoSound 9000 MK1 version's laser device changing procedure.
You can purchase Beosound 9000 parts on Kose Trading's website by clicking this link.
kosetrading.co...
Leave a comment for next product to do an Disassembly process
Dear Kose I Just need to put the doors back with the cable the video is simply fantastic and breath taking. Please make a video with assembling back all that stuff.
You're welcome. Maybe one day I will make that video.
Thank you for creating this type of content!
Your welcome
Dear Kose Trading the video is simply fantastic and breath taking. Please make a video with assembling back all that stuff. It should be even more dramatic.
Thank you for your comment. Assembling all the part will not be dramatic. It will be fun :)
I am looking forward to see that fun. But honestly speaking great thanks for your films. For me a BS9000 was a black magic. Now I see it can be serviced to some extent.
@@danutapiotr16 It was only joke :). It's possible, but i think i will be very hard and will take some time. The Beosound 9000 is the most iconic CD-player ever and design is top. But the materials inside the BS 9000 is low quality.
I have two units with rust and bad caps .This is a great help ..I wont break anything with your guidance
Hi ladronsiman1471
Thank you for your comment. I'm glad that the video could help you to repair your Beosound 9000.
If you need any part we are here for help.
Best
Kose Trading
Ihsan Kose
Buenas tardes quisiera saber como va colocado el resorte que voló al quitar la pieza plástica negra gracias
Hi. Send me e-mail and I will send you a picture of the. COntact@kosetrading.com
Es genial tu presentacion del video,me gusta mas haces incapie en el aparato describiendolo completamente.((Genial))!!!!
Thank you for your comment and glad for hearing you likes the videos.
Also fron blast from the past .
One of the best cd-player in the world
Absolutely beautiful work. Thank you for posting. Are you going to do the assembly video? I did the mistake to remove the back/bottom side and found that only way to re-attach all ground cables is to disassemble as you did
You're welcome. No, I only do assembly video right now.
Send me a private e-mail and let me try to help you.
Best
Kose Trading
@@KoseTrading hi, i liked your video
Used to repair these for a B&O service center. They look nice but were horrible to work on, Certainly don't miss them. Didnt mind the Overture though. Give me Pioneer any day of the week instead.
Yes. The system is very complicated and technically and most be an expert and has some skills to working with the Beosound 9000.
What service center did you work on.?
@@KoseTrading Cambridge. Repaired plenty of them and attended training courses with Hans just not an enjoyable experience working on these.
Replacing the laser: on the video where he is able to move the clamper (sledge? Sleigh?) freely to the center to facilitate laser removal. I heard one needs a beo4 remote's input to move the clamper. Question 1: can you move it without remote. Question 2. btw, am doing the work for a friend, who said he was not able to pair the remote. Any instruction for pairing?? And the command input to move the clamper: "72" ?. Thanks a bunch.
Yes, you can setup the Beosound 9000 into testmode and the sledge can move freely or, you can move the clamper gear under the CD to also do it. If you need the service manual. you can download it here.
kosetrading.com/bang-and-olufsen-service-manuals/
@@KoseTrading there was a blog that suggest that when the clamper is on the move, press the power button to shut off, then the clamper becomes free to move to any position. it works. !
yes, that works, when the clamper on the move and power off, thanks
@@ctw2118 Send us a e-mail and we will guide you. Contact@kosetrading.com
Hi. Thank you for the video, very helpful. I need your help. At 11 minutes and 30 seconds of the video you can see the springs and foams that suspend the laser. What height should these foams be? Mine are completely ruined and I need to replace them. Thank you for your answer
Thank you for your message. It is not necessary for foam to be completely in tact. I'm also a little unsure what function is with the foam in middle of the spring. You have quietly install the CD drive again without foaming. I have tried that myself. I have foam in stock if you are interested.
How about to do a dissemble process of the beosound 4000? The cassette and the cd doesn’t work anymore. Your videos are very informative and i love them
Hi Robinwong3028
Thank you for your message.
Yes, we will also process a video for Beosound 4000. If you need the cassette and the cd-player we have the complete parts in fully working order. Send us a message and we can take a look.
Best
Kose Trading
My glass doesn’t click open. Any suggestions?
Hi. Thank you for your comment. You Beosound 9000 needs a new gear motor for the glass/lid
@@KoseTrading this is with the power off I mean. How can it be a gear motor? It used to work and has been sitting in a spare bedroom for a few years and I wanted to take it apart and clean it up and couldn’t get the glass to open. Any other suggestions or are you sure it needs to be serviced?
@@Puroplatino If the glass can't open with the button there is an issue. The best is to send us a video of the problem and we can take it from there.
@@KoseTrading I’m talking about without power the glass doesn’t open. How can I contact you to send you an email with the video?
@@Puroplatino Contact me here. Contact@kosetrading.com
Please instruct me on how to put the clamper in the center position
I can send you the service manual if that can help?
I'm glad you would send it.
@@teruopochi1737 Send us a e-mail
Hello Kose, your instructions are very detailed, great video! Not sure if you could help me. My beosound 9000 is stuck at cd 6, doesn't go back to cd 1. when powered on, it will try to move away from cd 6 but fails. Any suggestion what might be causing this? thank you.
Thank you for your comment and for watching our videos!
Yes, you can open up the CD laser on your Beosound 9000. Underneath, there is a release clamp that you can adjust. If you need further assistance, feel free to send us an email.
@@KoseTrading thank you Kose. I sent you an email. Would really appreciate if you could share detailed steps on how to adjust this clamper. TIA!
Hi Ihsan, Thank you so much for your help. I really appreciate it. Sent you an update, probably went to your spam folder. I have two questions that need your expert advice. 1. how do I adjust the gearwheel, clockwise or counterclockwise? and to what degree it's turned to a proper position? 2. any adjustment or calibration of the cd player I need to do once the gearwheel is done with its adjustment? thanks much.
I have a Beosound 9000 MK2 which need be looked at. The CD clapper stops at the first position, spins and then the unit turns off. I suspect it’s the laser. I live in the North East USA. If I send it to you can you check it out and make sure it’s working properly? I would send it via DHL. Thanks.
Hi. Thank you for your message. Yes, you are more then welcome. Send me e-mail to contact@kosetrading.com
I got a mk 2. anyone has any issue with cd disc rubbing during play. In my case, mk2, the rubbing is only at cd position 1,2, 5 and 6. No rubbing in cd 3 and 4. The rubbing is very noticeable even from 5-7 feet away. Any fix ideas ?
Yes, you need to adjust the cd levering. It's in the service manual hot to do it
@@KoseTrading thanks for the reply.. Is Cd levering the same as the adjusting parallelism of the clamper, 9116 using the screw, #34 , to be parallel to top plate 9114, per section 5-5 . I supposed visually ?? or some shim method?? thanks
Dear kose,
How was the ground wire attached ?
So I have a Mk2; At video position, 9:05, during the disassembly of the laser, the ground wire you held on your right hand, how was that attach , ie, to what material? Mine came off and it has no solder at the wire's end ie 4mm of exposed copper wire. Was it just tuck under the thin al metal tab? see video 59:20, under your thumb. solder ?
Thank you for your message.
The ground wire is connected with the screw on top. It need to be fix/solder to the wire.
@@KoseTrading thanks for the reply. yes one end was attached to the washer and under a screw, the other end appears to be attached to the aluminum sheet disc with a tab at the circumference. Mine fell off there and no hint of leftover solder on wire, meaning its clean. If should be tin-lead solder to the aluminum then thats what i will do, but was afraid can distort the thin disc, perhaps a conductive epoxy?? thanks
@@ctw2118 Your welcome. Yes, you are correct. I have open many Beosound 9000 for service but i haven't experienced that the ground wire fall off.
@@KoseTrading That ground wire, it was difficult to solder to the disc (steel i think) so i merely tuck under the "tab". so far so good.
The laser unit used is a VAM1205 CDM12.5?
Yes. it's for MK 1 version.
And for the mk2 ?
@@Belinea1610 What SW version is your Beosound 9000 running?
@@KoseTrading I too have a MK2, how you figure the sw version ? "s.w. 2.2" label on the panel , is that it?