How to Replace and Fix ESC Mosfet and Check For Other Damage
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- High quality & Only 24 Hours Build time: pcbway.com
YAOGONG 8878D Solder Station
bit.ly/2WuIARx
SMD Microscope
bit.ly/2YPcQE6
Magnetic mount
bit.ly/2X0Wmw0
How To Fix ESC Playlist • How To Fix ESC
SMD Teezers Tester
bit.ly/2WrnXp8
Soldering Stand Kit
bit.ly/2WuXrLu
Solder Paste
bit.ly/2I21Axi
Solder Flux
bit.ly/2Qrnkqd
Hex Driver Toolkits
This One I have been using over 2 years
bit.ly/2NwBVxt
Hex Driver Tips
bit.ly/2wlDnMX
Antenna Glue
bit.ly/2JHzTNL
Consider Following me and supporting on Patreon.
/ dronemesh
----------------------------------------------------------
-- TOP 30x30 4in1 ESC --
Aikon AK32
BG: bit.ly/2uSBI0O
GetFPV: bit.ly/2FU854b
RDQ: bit.ly/2YVkL3K
Tekko32 Metal
BG: bit.ly/2G5VfRC
GetFPV: bit.ly/2VsroYV
RDQ: bit.ly/2UF3WKU
T-Motor F55A
BG: bit.ly/2JIdAo1
GetFPV: bit.ly/2P2i8sp
RDQ: bit.ly/2I3D69n
T-Motor F45A
BG: bit.ly/2CZe9IP
GetFPV: bit.ly/2D3g2U3
RDQ: bit.ly/2YZmCof
Dalrc Rocket
BG: bit.ly/2O5Pcxc
GetFPV: bit.ly/2WQ8Imk
RDQ: bit.ly/2Kg0EKe
-- Best 20x20 4in1 ESC In Order From Best --
HGLRC Forward
BG: bit.ly/2CM2oEG
GETFPV: N/A
RDQ: bit.ly/2GfMKDQ
Aikon AK32 Mini
BG: bit.ly/2Yu2E4p
GetFPV: bit.ly/2KlKlLU
RDQ: bit.ly/2KfQ6KV
Airbot Ori32
BG: bit.ly/2UTK2JF
GETFPV: bit.ly/2KlLfrM
RDQ: bit.ly/2U94tRe
Need Help with something?
dronemeshforum.com
Make sure to sign up to the newsletter and create an account to not miss big insane sales.
shopdronemesh.com
Android APP
play.google.co...
IOS APP
itunes.apple.c...
Follow me on Facebook
/ dronemesh
------------------------------------
I highly recommend these products if unsure
Tekko32
bit.ly/2NwffxB
kakuteV2 AIO
bit.ly/2CxQct0
Hakcrc (Best Budget ESC)
bit.ly/2OgrOlO
25km Range on these awesome VTX's
FX2
goo.gl/8PswEP
X2
goo.gl/VsDZ6n
---------------------------------------------------------------
The HEX driver I recommended which i bought 2 sets of (Must have if your into building)
bit.ly/2NwBVxt
Batteries I use
bit.ly/2PlCvQn
Camera I use
amzn.to/2iQHCwV
Standoffs I find to be the best
bit.ly/2CwG17Z
Xt60 Premade I use
bit.ly/2Pmf89j
Heat shrink I mentioned
bit.ly/2PkrVcA
Soldering station
bit.ly/2zZP9za
Contact: mesh.drone@gmail.com
---------------------
Song Used
/ living-in-stereo
------------------------------------
Song Used info
Track was provided by NoCopyrightSounds
Paul Flint - Savage [NCS Release]
• Paul Flint - Savage | ...
Paul Flint
• / paulflintmusic
• / paulflintmusic
• / paulflintmusic
• / paulflintmu. .
• Mastering by redwolfmasterin...
Song: Distrion & Alex Skrindo - Lightning [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Distrion & Alex Skrind...
Download/Stream: ncs.io/LightningYO
ID: dj2938hd298hflahsknckdfhsidufh9398
The Playlist
th-cam.com/play/PLoPtpxJIxgnZXd0o3jwUju9Kg4_zCiPzO.html
I have the same ESC, with the exact same MOSFET burned out. I wonder if it's a huge coincidence, or if it's a design problem. Either way, looks like you did half the work for me, thanks for the video!
Nice Video!
Few things I'd like to note. When checking Mosfets it's a quick and easy method to just check the motor pads for shorts to both ground and Vbat, certainly worth showing. What I also did not see is replacing the stock lead free solder with leaded solder, or at least with the alloy you have on hand, which is rather certainly going to be a different tin alloy. Just wipe the pad with solder wick and apply fresh solder after. And at last, I like to gently press on the top of the part to get all the excess solder out from below the part, as this might cause pins like the gate to not catch solder, if the big bottom pad has a big pile of solder on it. This will cause a blob like the one you scraped with your tweezers, likely much bigger. This is no problem at all, just take your iron, touch the blob and pull it all around the part. This will help make sure every pin has solder on. Since you already applied a proper amount of flux to the board, the solder will not stick to places it should not, and every pad will take just as much solder as it needs to function properly. Apart form that I think it's a very satisfying technique which especially helps with the real tiny parts once mastered. Nice video, well produced! I'm really surprised by the microscope!
12:04... The second I realize my 80's-early 90's college training no longer matters!
I went to college for Electronics, Robotics and Computers, while component repairing DG Nova and Supernova Minis. (NASA and JPL refrigerator sized computers).
I never imagined my hand to eye coordination being an issue in the future.
Obviously I knew things were getting smaller, but this is ridiculous!!!
I'm retiring my business this month and have my eye on your microscope and meter. Thank you for linking them.
Dude thank you from a builder! I seriously needed this ,I can't tell you how many boards I've messed up trying to do this w a magnifying glass.Although I've had a few successes ,for theost part.it has been futile.lol I love the microscope your using and I'm getting one .
However the knowledge u impart is second to none .Thank you again.
Excellent job I need to watch more. I’ve done it before but I didn’t use any of the cool tools that you had. Makes it a lot more difficult and took a lot more time just to do it, now I could do it and not feel frustrated thanks for the video. Wow!
Hi, bro! How are you doing? I hope everything is better with your family now!
Congratulations again for your rich videos and knowledge that you bring to us.
So... For the last 12 months, I'm working on the development of a sub 250g quadrotor and my focus in the last 3 months was on the ESC component. I'm using Li-Ion batteries because the energy density is better than Li-Po and there are currently some Li-Ion 18650 cells with a good discharge rate. The problem is that ESCs are made for Li-Po and maybe all of them have a low voltage cut-off (LVC) feature that was made for Li-Po cells, because it cuts off power when the cell voltage drops below ~3.3V. I bought 12 models of light 4-in-1 ESCs, some 1-2S, some 2-4S. My drone battery is a 2S Li-Ion, and the voltage starts at 8.4V and can drop up to 5.2V, but the ESC doesn't let it go below 6V. I tried to open the BLHeli_S code to check if is it possible to modify this LVC feature but I couldn't find where to do it. Another possibility is to change some part of the ESC, maybe removing some resistor, I don't know... Do you think is it possible to record a video about this subject? A lot of people are starting using Li-Ion cells in micro-drones because of its good energy/weight ratio, but this issue with the ESC is really a bottleneck. Any help would be very welcome. Thanks in advance and have a wonderful day!
Thanks .... I have to look into it and if it's a matter of hardware should be a simple fix. Need couple days to get around testing that.
I was looking into 21700s from used Tesla battery packs they look promising 5000mah but are so expensive. For used ones they go $8+/piece.
Thanks man! Watched this video months ago and finally burnt my fist couple fets.
Was on a crazy bee f4fr.
Was like shaving with a straight razor…
Have a good one!
Did you happen to replace the burnt ones? I'm having issues with the Eachine Novice-II board (which is very similar to the crazy bee and has the same firmware f4fr). The issue I'm having is that one of the motors spins ~30% slower than the other 3. It flies normally but doesn't have the power it once had. Tried to replace motors and stuff and it looks like it's the ESC. All 3 FETs look ok, but that's to be expected, because if there was any fully blown FET, the motor wouldn't work at all. Maybe one of the FET's is just a bit damaged, but still somehow works (I've never seen that happen with FETs in all my career though), or maybe it's the gate driver or capacitor or resistor... I don't know... it's all so small and it's really hard to probe those little bastards :)
@@gregor.potrebujes
Some times the drivers as well as the relative components burn too, the time it takes to replace all related components, unless you know exactly what your doing you’ll probably be better of going for a replacement fc.
It’s sometimes obvious that it’s burnt, but you can still fly with a partial bunt fett. Look for a burn bubble in the bottom left of each fett.
Drone mesh has a awesome tutorial on fett testing, try that if u can’t see anything
@@gregor.potrebujes
Also get your self a pair of multimeter tweezers. Changes the game.
@@gregor.potrebujes Having a similar issue on my playf4 board, did you manage to fix yours?
@@yashasranjan8497 Unfortunately not...
when in doubt..... add more flux?
Awesome guide! Where can one get replacement fets except from other ESC?
where do you buy your FETs, diodes etc.?
Hi, did you find it out? I need mosfet for speedybee 405 v3 esc
@@nazarkokhan no, can't help you there
@@nazarkokhanhave You found it yet? im in the same spot
This is so cool thanks for your video just getting into this type of repair work
Have you ever use solder paste ?
The microscope really helps doing the work with everything
Hello I'm researching fixing a flight controller and the area I'm working on has components on the opposite side of the board. Will the components on the underside of the board fall off from the area im working?
I have two 4 in 1 esc that need repaired, would you want to repair them if I payed you?
Question. I heard you mention about how kiss has different fets and they are one of the only escs that use it... What were the other ones that also use them?
Thanks. Great content as always!
How did you find that they are both n channel fets compared to an n and a p Chanel fet?
Wow, I've burned out mosfet on motor 1 on microquad. I def cant handle this minute level task. Any takers?? 💰
how do we identify what replacement components to buy?
Super 😜🤘 où est ce que tu as trouvé les diagrammes de ton esc ?
This will probably come in handy, I literally just put my cygnet cx3 in a creek xD cleaned it with IPA and its currently baking in the oven.
Hi, is it possible to do this with a normal soldering iron ?
So that flux also solders mosfet back to it place when you heat it, or did you use sonething else when you put new mosfet on place and heated it. It solders it self when heated?
How much air and temperature ???? You remove mosfet
Do they make a tiny suction device to secure and move the fets/chips? I saw a machine that placed chips work like that. It would be cool if there was one made for hobbiest.
I think there is I bought ancheap one before and it was terrible so I lost hope but I'll look into if anything better came out.
what did you actuall do with the soldering iron? Did you add a bit of fresh solder?
Awesome thanks bud definitely helped 👍🏻
Were do you get the smd components from?
Can you update the product links please?
hello i have a dalrc rocket 45a 4 in 1 buth have the battery connection the wrong way connect and the only thing that geth´s hot is the 0m25 by the + and - is this the problem can you help mi bofor i order one and try
Amazing fix, and great video.
Were do you get the smd components from?
dude any tips on preventing neighboring components from shifting while doing rework? putty?
This guys is genius :)
Could I send you a few ESC for repairs??
hello dalrc 6 mosfets needed for esc. Where can I find these mosfets? What are the thickness and dimensions? I would really apreciate if you help. thanks.
Hi, i have an ESC aerostar 150amps HV and it keeps beeping , the motor doesn't start. I have checked everything, the servo tester is working fine and i also tried recalibrating it and even reprograming it but it doesn't respond in any way. What do you think it might be the problem with it? Thanks
i have a new Xrotor 4in1 40A (20x20) esc, never used, where one of the 4 motors pin out looks like have problem because motors even make sound when i connect lipo, and can´t be recognized via blheli 32, all others 3 do it but one not, in this case is the M2, i did make sure that is not a motor problem because i changed the motor by one that sound, what can be the issue with it?
Pretty nice work, dude!!! 😊
Nice work brother!!!
👍😀👍
Could you please make a video on how to fix FC particularly omnibus f4 Pro corner? Thanks
The mamba 506 esc use QN3109 mosfets, but I dont find the same, It says "QN3109 809 13K", can I use another replacement?
I have a esc that works upside down at full speed but if I try to ride I get a hardware failure message does that sound like a mosfet issue or something else?
This is awesome wow I’m so excited this video is just amazing and you are just too fucking cool man I’ve got to get a microscope and some fucking tweezers now
For starters, where's your grounded anti-static mat and wrist strap ? Go figure ! Where's your solder wick ? What a cowboy !
I can't find these fets anywhere. Can you possibly drop me a link?
Awesome video! Thank you!
Yo bro do you still replace MOSFET still bro?
Thats a realy nice fix 🤘👌 thx and go on 🍀🍀🍀 greets
Where do you get fets? Nice video!!! Subscribe
Mouser just look up the fet number.. Thanks for the Subscribe :)
Great video thanks
youre a legend. thank you
Nice video 👍❤️
hello thanks for video
need some advice !!
i have gpu shorted to the ground so i test mosfets and capacitor some of them are shorted to ground , i remove all shorted to ground mosfet and keep 2 that's not shorted and between leads are 12v dc
so it maybe a solder under gpu or vram or other shorted capacitor !
for that could i inject 12v in mosfets leads that is shorted and see wich place is seem to be hot? or any advide i will apréciate that
any suggestion about how much volts and current to inject in lead or some place suggested by you!
thanks and have nice day
thanks for everyone who reads my comment :) see you next replay ^^
I hope you can answer me. So i have aleays wondered why esc burn so commonly. I mean there is a lot of electronic components in our lifes and not other componen is so unreliable and fails so spectacularly as rc escs. Now that i watched your video maybe you are qualified enough to know the reason. It has to be any desight flaw in them. I have bought countless cheap ebay esc and i refrigerate them a lot (its not a matter of heat) i have used them with less voltaje and ask of them a lot ñess current than they are rated for (low gearing and hight timing in a low grip tyre)
1. short circuit somewhere
2. Wrong firmware from manufacturer regarding dead time
3. Very large voltage spikes.
4. Sudden motor stops
Last one shitty design
The problem was you never read the instructions hobbywing insists to use a external cap no matter what the board needs more filtering I broke one arming it fett fried they replaced it an after using caps I have 4 on 6s 1900kv builds so whatever. U do add a 35v 1000 cap
Early batch has manual saying cap is only necessary for 5S or 6S setup. Only after a lot of people reporting fires, they revised the "disclaimer". Out of all ESC's DM tested, only HW45 failed, literally. If others survive, why HW45 doesn't considering it's more expensive than most ESC tested. It's not an excuse, bad component selection and layout is the main problem.
You need to add more flux.... :) But great video anyway)
i have 3 of those escs all with broken at that exact same spot
When I sit there after watching vid, 450 deg hott air flowing onto a fet for like 1.5 whole minutes and it doesn't come loose.
You might want to remove the piece of metal that is stuck in the motor winding :-)
It was a string I noticed it while editing the video. ;)
yo man look at the white lipo power clip @17:40
These are super cheap alligator clips if the motor had props they would of acted as a fuse.
@@DroneMesh oh lol can we talk on discord later
3:49 capacitors => MOSFETs ???
Yea that is what i meant but hoping you guys would understand its very hard to record such a video
I think you blew the FETs with a Gaoneng 2200mah 130C/260C batteries. Chinese never lie, so that mean 570A was flowing throught your ESC!!!
Replacing FETs are a myth. Ive done almost perfect jobs on 4 soeedybee f405 escs and just did my mamba f405 mk2. No success yet. Using a smoke stopper and after replacing the one bad FET on my mamba. Still acts the same and the FET was def bad and is the only issue i and their techs see as bad
did you change the motor? a burn motor will continue to burn the fets
@@emon6436 yes, ive used multiple motors and tried using other same model donor fets and it has me beyond puzzled.
Holy shit.Thats brain surgery.Makes me wish i didn't shake a lil.
Dude u have so many adds on ur channel makes it dam near not wirth watching