FlexiSpot E7 Plus Standing Desk: bit.ly/44GN8EM (US) FlexiSpot E7 Plus Standing Desk: bit.ly/3JYCPT6 (CAN) Description: FlexiSpot's Thrilling Brand Day! Unmissable Flash Sale From May 20 to May 26 on Your Favorite Products! For the New Arrival E7 Plus! Use my code “24BDYTB50” for an extra $50 off! Check the FlexiSpot to get more exclusive discounts! Trust me, it's a rare treat!
It’s always nice to see a Father and his Son working in the shop together, a special time of bonding that will be held in memories for ever. Another great Stuck on Sawdust project Daniel, this is one that I will be building with my grandson for sure. Take care, Wayne
Daaaaammmmm that's a beaut nice to see you back with another build brother looks amazing. May have to try this with little more contrast oak and mahogany is coming to mind. 🤔🏴👍
ohhh, look at that sapele grain.... Great project. The lift table looks to be handy as well. From tool bench to outfeed support as needed and any other use
Another great video! And love the FlexiSpot, would make a great multi-purpose workbench/ out feed table. Also, I can relate to not being able to find the tool I need in the middle of a project 😂
I always enjoy your videos. I thought I had seen all the “meet me at..” places. Now there is another one … lumber storage Love the dovetail. Love the simplicity in the shelf with its unique look. Thank God for children Nice Flexispot table. Would love one if I had room for it.
Awesome looking display! Love the contrasting colors of the wood! That Flexispot table is perfect for your laser. Always good to have our kids or Grandkids in the shop helping! Take care my friend.
Great Vid! I didn't realize flexispot could hold that much weight. 600lbs did you say? Wow! Love the project 💜 and your solution for the pocket hole dilemma 🤘🏼 Nicely done
9:21 when you started marking the shelves, I thought you were going to do a rebate cut (or rabbet if you prefer) so that the upright was inset into the shelves. If you had done? It would have added a bit of time to the build but would have added a ton of strength to it.
You know they make plugs now for those pocket holes now. Might want to consider that. By now they might even make something where you can make your own plugs.
Very nice looking shelf, Daniel! Question, are you selling this exact one on Etsy even with the ridges on the shiplap or was this just the prototype? thanks
Just a thought, instead of trying to balance all that wood to pencil mark your cut points, since you already know the height of your piece, couldn’t you just cut both 15° miters before hand? Just sayin’.
No their not too bad , there are options at the shipping spots for boxes and online I typically type in google , funny shaped shipping boxes and there are a bunch of sites from different places , I usually find a box that is close enough in size and package it full of bubble wrap and foam to be bomb proof
Bearded Viking, how would you recommend I use my channel to get people registered to vote? Did you post a video on your channel or you just doing it all in person? Thanks.
So I’ll be hopefully getting a video of that soon ! I will keep you posted, I’ve been doing it in person , via the tpusa app , I will have a video on it soon
I saw his thumbnails numerous times and didn’t read…I thought he was an Orthodox Jew too. My husband laughed at me when I told him I was afraid it would be partially in Hebrew and I’d have to call family to translate 🤦♀️ Now I’m playing catch up with all the videos I missed that are all completely in English 😂
FlexiSpot E7 Plus Standing Desk: bit.ly/44GN8EM (US)
FlexiSpot E7 Plus Standing Desk: bit.ly/3JYCPT6 (CAN)
Description:
FlexiSpot's Thrilling Brand Day! Unmissable Flash Sale From May 20 to May 26 on Your Favorite Products!
For the New Arrival E7 Plus! Use my code “24BDYTB50” for an extra $50 off! Check the FlexiSpot to get more exclusive discounts! Trust me, it's a rare treat!
Welp. Wife saw this before me.....and guess what I got to build! LOL. That is awesome!
😂 hilarious Richard
I feel your pain my wife does me the same way
Great project and great build video too.. Rock on
The build is really cool. That table could be super handy.
I love the table
It’s always nice to see a Father and his Son working in the shop together, a special time of bonding that will be held in memories for ever.
Another great Stuck on Sawdust project Daniel, this is one that I will be building with my grandson for sure. Take care, Wayne
Thanks Wayne ! It’s super a fun project .
Daaaaammmmm that's a beaut nice to see you back with another build brother looks amazing. May have to try this with little more contrast oak and mahogany is coming to mind. 🤔🏴👍
Oh yes. 🙌
ohhh, look at that sapele grain.... Great project. The lift table looks to be handy as well. From tool bench to outfeed support as needed and any other use
Oh yes ! Very useful and I absolutely love sepele
Another great video! And love the FlexiSpot, would make a great multi-purpose workbench/ out feed table. Also, I can relate to not being able to find the tool I need in the middle of a project 😂
Brother Josh ! You’re the man ! Oh and ya better believe it as soon as I finished the project I found my swivel extension’ 🤦🏻♂️
I always enjoy your videos. I thought I had seen all the “meet me at..” places. Now there is another one … lumber storage Love the dovetail.
Love the simplicity in the shelf with its unique look.
Thank God for children
Nice Flexispot table. Would love one if I had room for it.
I know !! I had to clear out space ! Glad I was able to work with them , their awesome , thanks for tuning in as always
Awesome looking display! Love the contrasting colors of the wood! That Flexispot table is perfect for your laser. Always good to have our kids or Grandkids in the shop helping! Take care my friend.
Thanks pop ! Take care brother
Nice project and a great warm up before heading out to the shop.
Awesome 👏
Love this build, Daniel! My twisted brain is already working on ways to add my own spin...
Hell yeah brother Ben !!
Looks like you were having your ups and downs in this video. I like this shelf project. Thanks for the video!
Great Vid! I didn't realize flexispot could hold that much weight. 600lbs did you say? Wow! Love the project 💜 and your solution for the pocket hole dilemma 🤘🏼 Nicely done
Skål 🍻 thanks so very much Kat ‘ you and the others are my motivation to put out content worth a damn !
@@Bearded-Viking-WoodWorks ← RockStar 🔥💜🔥
Every time that music starts I think Dolly is going to start singing 9 to 5😅
Love it brother. And glad to see sponsors man that is an another milestone. Keep grinding sir!
Thank you brother Greg ! Always looking forward to your feedback brother . Skål 🍻
Thanks very cool!
My pleasure
Another awesome project to add to my list. Thabk you for everything you do.
It’s my pleasure John
Love your videos you are my favorite woodworker never a boring moment nice work
Kick ass !! So happy to hear this. I truly appreciate ya ! Skål 🫡
Greetings Viking
Skål 🫡
Another amazing build!!! I’m going to make this!!!
Super fun project, very profitable too . I’m making another one this week
VALHALLA!!
SKÅL 🫡
9:21 when you started marking the shelves, I thought you were going to do a rebate cut (or rabbet if you prefer) so that the upright was inset into the shelves. If you had done? It would have added a bit of time to the build but would have added a ton of strength to it.
You know they make plugs now for those pocket holes now. Might want to consider that. By now they might even make something where you can make your own plugs.
Do you one of those camera things that follow you? Great shelf. I love it.
Yes I do 😂
Thanks again! Beautiful!!
Very nice looking shelf, Daniel! Question, are you selling this exact one on Etsy even with the ridges on the shiplap or was this just the prototype? thanks
Protype , good question lol
Yeah you need one of those bendable things. I get it though. I got more tools lost than most guys own.
Share share share
Just a thought, instead of trying to balance all that wood to pencil mark your cut points, since you already know the height of your piece, couldn’t you just cut both 15° miters before hand? Just sayin’.
Yes but why not make it entertaining and difficult for no reason right. ? lol of course
How do you ship this stuff? The boxes have to be a damned fortune too, no?
No their not too bad , there are options at the shipping spots for boxes and online I typically type in google , funny shaped shipping boxes and there are a bunch of sites from different places , I usually find a box that is close enough in size and package it full of bubble wrap and foam to be bomb proof
@@Bearded-Viking-WoodWorks “funny shaped shipping boxes” bro that’s epic
⭐️🇺🇸⭐️🇺🇸⭐️🇺🇸⭐️🇺🇸⭐️
Bearded Viking, how would you recommend I use my channel to get people registered to vote? Did you post a video on your channel or you just doing it all in person? Thanks.
So I’ll be hopefully getting a video of that soon ! I will keep you posted, I’ve been doing it in person , via the tpusa app , I will have a video on it soon
Hey dude, quit fussing at the roosters. I love hearing the animals in the background.
The camera jiggle at high speed is a lot disorientating. I went to Etsy, there are more than one bearded viking hits.
Sorry about that bro. I’ll tighten that up on the next video
@@Bearded-Viking-WoodWorks Thanks for the response. A lot of creators are too busy to interact with us peons.
@@brucewelty7684that's one of the best things about Daniel. He always responds to us
Until this video I thought you had Jew hair. Thanks for clearing that up for me.
That is freaking hilarious 😆
I saw his thumbnails numerous times and didn’t read…I thought he was an Orthodox Jew too. My husband laughed at me when I told him I was afraid it would be partially in Hebrew and I’d have to call family to translate 🤦♀️ Now I’m playing catch up with all the videos I missed that are all completely in English 😂