I've learned new today, heating a Graphics chip that still connected to heatsink from the back of the board with 500 degrees C heat. Thanks for sharing your knowledge Sorin.
Your the best technician ever sir Sorin. I salute on you.. i'v watch every video that you upload.. your the best man.. your the best. and i want to be like you..
thanks for this video, just what I needed to know. only mine is a Compaq Presario cq61 model. it starts and has the error code for the graphics chip. but no picture. sent it to a place called bullhead city geeks for repair after 3 attempts and $395.-00 later and the laptop has sat for 5 years waiting for a good repair. now I know I can do it myself ....thank you for this video again.
I had the same model laptop and had to do exactly that, but i baked the whole motherboard in the oven instead. I had to do that several times before the laptop eventually died.
With this fault will it give external vga out display? My dell laptop is black screen but gives external display, the lcd and lcd cable are definitely working
My computer turn on without ram with green light but no dispray also if you put ram turn on without a picture like ram when removed what's the problem with my desctop? Help please
I have an asus x453s laptop , with white screen issue. I thought its led screen issue then I bought a new one 30pin , 14" then when I put it in, it doesnt have display. What could be the problem sir? Thank you very much The Default led screen when turned on got white screen The bought one has no display. Tried External Monitor - No display.
If the graphics chip is faulty, and the CPU has integrated graphics, can I basically remove the graphics chip and let the integrated graphics on the CPU do the job?
If the motherboard fail beacause of gpu you can also disable it by removing gpu voltage regulator but only if its discrete graphics chip (with integrated intel graphics card on cpu)
Can I still remove the gpu voltage for the discrete gpu even if it is still functional? Mine works for about 30mins before getting too hot and then the screen gets this distorted color schemes
Hi. I have this issue. My motherboard is dead, I ordered a new one so I see this as a challenge. My motherboard is Asus K53SD rev 6.0. I turn on my laptop, power button is on, caps lock is on, little led light (marked as light bulb) is on, but my screen is black. Fan works normally, I can hear the hdd spinning. I tried all those easy fixes; switching ram, taking out cmos battery, holding power button for a minute, etc. I tried the external display via vga and hdmi. Nothing. So my suspicion was right from the beginning, dead graphics chip. I disassembled the laptop, took apart everything from the motherboard and tried the bare test (just motherboard with cooling system connected to external display); still nothing. I even tried cutting power to graphics chip and creating it to UMA (I took out it's voltage regulator); still nothing. I checked my display (learned that from one of your videos), there is 19v, 5 and 3.3 power supply. Any help would be most appreciated. By the way, your videos are great learning material. I learned alot. Thank you. I use this electronic tinkering as an escape from my stressful job and my stressful life. It calms me down.
James Domaboc, reflowing your graphics chip is the solution. I did it a while back, and it inhaled new life into my dead motherboard. I just checked it, works just fine, but I already installed a new motherboard. My old one was killed by the heat. This time I cut out 6 cm circle inside a bottom laptop cover, just below the graphics chip. Installed a small 5v, 5 cm diameter cooling fan. I covered it with a stainless steel grill I scavenged from my old desktop power supply. Soldered its power to USB slot. Now fan starts when I start my laptop. No more overheating.
Nice video - and thank you for sharing your insight about what is really wrong with these gpu - the problem is in the chip not the bga solder pad. But then why did you heat the gpu from the bottom? If you reflow the gpu from the top where actual silicon is exposed, then it will take lot less heat and is safer. I did mine at 330 deg c/ 50 seconds from the top and it worked fine.
he did that to avoid the sudden thermal drop and to stabalize the chip into position with the melted lead, cause heat can do two things on a chip either expand or shrink and with that chip exposed to an environtment with alot lower temp itll cause it to crack/break / or sometimes pop like i did with mine lol and i do precaution with it like slowly lowering that temp while pulling the hotair away but it did cracked ived learned it the hardway like sorin did ive done gpu reballing the same way now just dont forget to change that thermal pad or thermal paste cause theyd be dried sometimes cause of the heat
It basically 'revives' dry solder joints around it and somewhat restores conductivity. It works, I've tried it on bigger Gpus but they'll need to be replaced eventually. Maybe 3 months, maybe 6 more months. Depending on average usage time/intensity.
Thank you for your explainings. I work about graphic card repairing. I am a civil engineer but i like repairing some electronical cards. Now, i try to repair a laptop: Acer Aspire 5750g. I have 19 volts at all of power supply. I have 4 ohms at gpu power supply, 16 ohms at 2 rail CPU power supply, Stand by powers 3.3v and 5.0v ok. All of power supplies gives their voltages, only CPU power rails can't give their voltages when i push the power button. When i push power button: power led is coming up, i/o chip starting test of system, cooling fan turns and it goes to off about 5 seconds later. What do you thing about that?
Hello, at what temperature and for how long should I use my heat gun. On heat gun I see speeds 1, 2, 3, 4, but I don't know what temperature they have.
But why did u heated up the back of the chip, and then took the heat away? You tried to see if the fan will start, or you wanted to re-melt the chip soldering? So the fan didn't start, what that meaned? Then you decided the old thermal is not working well? Where is the thermic sensor, on the chip?
I've done that and the temperature decreses about 10 celsius degrees and the laptop lefe expectancy increses a lot. Of course, depending how do you use the laptop
Can the graphics chip cause the labtop to not turn on, Even when there's 19v and 3.3v and the switch the lights just flash for some seconds 😳 then turn off.... can u help?
simply disable it from device manager, my dell Inspiron's gtx 850m crash on every games with "application has been block from accessing gpu" shit and now I have to use intel hd 4600.
Hi,. Excelent job . I got hp pavilion dm4t-1000 . But my HP starts and Windows works except fan is running 100% and CPU side of laptof overheats like crazy. Cleaned thermal paste but didn't help. I guess because of this my 9 cell battery died .I heard problem is ATI chip(that's how i finded your video). So does CRAZY OVERHEATING means ATI chip is dead or not working and this tutorial will help me? Thanks, Appreciate your job.
I have a Dell Dimension 3000 it's not showing a pitcher on the monitor so I googled it so tell me if this is the problem so I can get a pitcher Baroni701 The 3000, has no AGP or PCIe slot, you need to buy a PCI graphics card. The 3000 troubleshooter is here BEV ??? Another thing I pulled up on google is change the Hard Drive and Dvd Drive or change the TFT and 1 CRT or the HDD but what will be the simplest thing for me to do to get pitcher and the Tower comes on ???
Hi, GPU? I have no BSD or artifacts but when i turn on, the screen either has picture normal or totally black- tried hot and cold do diff. . I have swapped out CPU, Ram, PS (19V good anyway at mosfets) When it does work, Video plays normal for about 5 mins then gets jittery like frames dropping out. NO ERRORS or BSD. MB will stay on forever and fans spin as usual. Could it be PS around GPU or only GPU? Already changed paste, pads ect and heatsink was clear. Thanks
I have a laptop Toshiba it is not turning on i think power is good, fan spinning, ram also fine but screen not coming i tried to connect with external monitor it not worked also so can it be caused from motherboard components or maybe motherboard itself? It happened when it is on and i can say i remember it had a much noise from fan and overheat. Can it be caused graphics card? any way what can i do ?
i am also facing this type of issue my laptop showing black screen after your video i will do like same maybe it will be resolve. What is the name of this heatup machine how to get?
I have an Acer E5-571G-719H the HDMI and VGA ports do not work, the nvidia drivers install and work but the intel graphic driver does not install. acer want to replace motherboard but that costs more than the original cost of the laptop
@electronics repair school: Hi, Some keys of my Lenovo X270 keyboard were not working so I've decided to replace it myself. I was very cautious and followed the service manual and best practices and could remove the faulty keyboard successfully. I plugged back all the ribbon cables and everything into its place. The issue is now the laptop turns ON (green light, the fan also turns, there is no beep unless I remove RAM memory) but the screen remains black. I've tried to connect it to an external monitor (and keyboard/mouse) but it didn't work. I've removed the CMOS battery for a while and put it back on but it didn't help. I have a big issue because when I wanted to connect the SSD drive to another laptop to access at least my data and back it up, it asks for BitLocker key which I never set (only had Windows session password) and I believe it is security/tamper protection from the old laptop. Could you please tell me what can be the issue? The GPU? Thanks a lot for your help.
They should put the GPU on socket just like they used to do for CPUs. But nowdays they put everything on BGA, that is planed obsolescence , it is by design.
This fix will be work a couple days or couple moths, permanently fix and for a long time period is a reball the chip with new balls or beter new chip and new balls, but keep up good work
1050 ti gtx right under memery chip i broke 2 chips c175 and r535 what can i use to replace them and or re wire it , what i get on my screen is memory artiffact still and i still get picture ,,, if you need a pic ill send you one
sir my games keep crashing in Asus tuf fx505dt I did everything like reset OS, update driver and etc but none of them worked. if that's gpu's fault can it be fixed?
I Have the Same Laptop, It turns on and shows BIOS and even Windows Loading Screen but after some Loading some type of RED Dots appear on the Screen and Windows Didn't Boot Up. Can anyone tell me whether my GPU is Faulted or NOT?
If only reflowing was a permanent fix. It's all rubbish, even reballing. It will last a few months before it fails again. The GPU is dying, it needs replacing. The Dell 5010 is the worst laptop I have ever seen for GPU failure. The 5010 does run quite hot, often the cooling fan doesn't kick in until around 65-70 celcius, this isn't the case on similar Dell models such as the 5030. 5040 and 5110 where the fan steps in around 55-60 celcius.
what can i do if i have 2 graphic card but one is disappear and not even recognizes in device manager this happen with my laptop toshiba satellite L50 and the graphic card that disappear is nvidea m950 4GB memory but the intel graphic card is working fine. please help me with this because i'm tired try to fix it
I have a laptop in which the screen has several blurry horizontal lines with a wider one near the bottom. Sometimes the screen has only the one wider white line near the bottom and the rest of the screen is black. I can't ever see any text on the screen so I can't boot up. When I try connecting an external monitor to the unit, the monitor gets no signal. What would you suspect to be the problem with this unit?
Not that easily, since the gap is too big and the pressure too low for thermal paste usually. The elasticity of the thermal pad is required for constant and proper contact hence heat conduction.
Hello, I would be happy if you could advise me what a problem with my laptop,I have a laptop .toshiba satellite a300 247, That served me faithfully for several years, I watched movie and the computer it was connected to the TV through a HDMI. connection, Suddenly The computer stopped transmitting an image,But the computer stays on, I connected the screen through a connection VGA, But still see nothing, Love your diagnosis, Thank you very much !!!
Greetings, Can you please help? I have an Intel Core™ i3-2350M CPU with only UMA Graphic (I looked into the motherbord there is nothing but the CPU and Chipset) When I Install the graphic driver the screen goes black. I wonder if changing the CPU would solve the problem! My laptop is Hp Probook 4530s
I am not a professional laptop repair guy but why did u overuse an arctic mx4 ? U just need to put a small line on the cpu and pressing the heatsink will get the job done.
My laptop motherboard has a amd dedicated graphic chip. If i completly remove the chip, motherboar will work or not? My laptop is HP pavilion dv6 6165tx
My friend, the color of the screen is shifting in my laptop and there are lines, but when I reflect it to the monitor with VGA, it works perfectly smoothly. Is the problem with the video card or the leptop lcd?
"First lets check the fan, the graphics chip usually dies from over heating" yup can confirm, my wifes laptop fan was totally full of fluff when i pulled it apart after the display went all funny
My on lenovo y570, with separate gpu gt555m, when is loaded with game, friezer game, show black screen after cople of seconds! When I puth gpu off, evreting is OK. But I can't play hard game anay more. Please help. Thank you.
Vaso Vulović Find that same chip on EBay, take it to a guy with an IR machine and a clean fucking workspace (Guy's workplace is a dump) have him replace the graphics card by desoldering the old one and resoldering the new one, and have him clean the board and fan. Should work like new. If you can, improve the RAM.
Great Quick fix! Hi Sorin,Good day to you! How can your determined easily if its a Graphics, Memory or Bios corruption issue? I think all of them showing same symptoms, it turns on with power led on but has black screen. Thanks on this video. More power to your channel!!
Just watched this today. I wish I had found this video a month ago because I had the same problem.I eventually fixed it but by replacing the graphics chip which is very difficult. One comment. You can generally tell it's a graphics chip problem and not corrupt Bios or memory because the hard disk light will act like a normal boot sequence and when it stops will continue showing activity when you hit "Enter" as Windows continues boot sequence even with no screen lighting. With BIOS and memory problems you won't see this sequence of hard disk activity indicated by the hard disk light in almost all failure modes where no video is visible. Again, great video.
what can i do if i have 2 graphic card but one is disappear and not even recognizes in device manager this happen with my laptop toshiba satellite L50 and the graphic card that disappear is nvidea m950 4GB memory but the intel graphic card is working fine. please help me with this because i'm tired try to fix it
Whatever happened - happened. But in the future build the habit of changing the thermal paste (maintenance) every spring and you won't have an overheating laptop on your hands. It's like a car - you can't just buy it and drive it without an oil change. And once you forget and do serious damage, the solution is never as cheap as regular maintenance. ;)
ranny day those kinds of chips don't have a surface to transfer heat like the casing of a cpu does! So, they go with pads to act as that intermideary mateial. Also! It depends on the pads u use. Some specify to apply some thermal paste and some don't! But generally, you don't because it ends up being a waste! Those laptops are never really used for heavy tasks, anyway! The real thing is to keep a clean airway and to keep the CPU at good temps always! Also! That pad on the back of the chip will help a lot to dissipate heat to the keyboard! So, next time you open up your out of the shelf laptop for dust blowing, put one of those guys in there!
Hallo I had thermal paste replacement for my laptop hp artist edition , after reassembling all component back again , it works but with black screen, I tried to connect external monitor but nothing comings, appreciate any Suggestion or help
You shouldn't do this. It might last for about 2 days and it's pain in the @$$ to open the laptop again. The best shot would be to disable the discrete graphics or replacing the chip. Chips are not expensive.
A hair dryer works fine on the Xbox 360. Heated it up, played for about a week before it crashed again. My PC however. Seems like I have it in the oven once per week
I've learned new today, heating a Graphics chip that still connected to heatsink from the back of the board with 500 degrees C heat. Thanks for sharing your knowledge Sorin.
I'm really happy that I managed to fix a laptop before a minute just like that. You are the best!
I just fix a graphics issue today using this method all thanks to the boss may God Bless you and keep you
on th mess of his workbench you can recognize the genius
Honestly. I don't know how the fuck he can work like this. JEE...Zus!
Your the best technician ever sir Sorin. I salute on you.. i'v watch every video that you upload.. your the best man.. your the best. and i want to be like you..
thanks for this video, just what I needed to know. only mine is a Compaq Presario cq61 model. it starts and has the error code for the graphics chip. but no picture. sent it to a place called bullhead city geeks for repair after 3 attempts and $395.-00 later and the laptop has sat for 5 years waiting for a good repair. now I know I can do it myself ....thank you for this video again.
Your working bench is very well organised can find everything quickly
And he was on a rush...sigh
Thanks Sorin.i have manage to bring this laptop to life in the same way the only problems is the new fan that starts and stops continuously.
Thank you! Wow, that is pretty detailed. I have never messed with a laptop before. Plenty of desktop builds and repairs though. Much respect.
At least he admitted that its a temporary fix at best
Yup. I would not do this. It is NOT a proper fix. Unfortunately.
Wouldn't he be able to just replace that gpu with a new one? I mean just desolder it and solder a new one back up.
@@thingshappen9199 sadly you should change mother board on this onboard shit my laptop fucks and i cant do shit now
@@thingshappen9199 reballing a new (expensive) GPU to a laptop MB is to expensive, not woth it.
I had the same model laptop and had to do exactly that, but i baked the whole motherboard in the oven instead. I had to do that several times before the laptop eventually died.
It really cool the way you have solved the issue
With this fault will it give external vga out display? My dell laptop is black screen but gives external display, the lcd and lcd cable are definitely working
My computer turn on without ram with green light but no dispray also if you put ram turn on without a picture like ram when removed what's the problem with my desctop? Help please
Hello 2 questions: how do you recognize which screw do you need for each hole? And what is the model of your compressor? Thanks
you may never receive an answer
@@Armagheddon-ux1gx lol 😂
I have an asus x453s laptop , with white screen issue. I thought its led screen issue then I bought a new one 30pin , 14" then when I put it in, it doesnt have display. What could be the problem sir? Thank you very much
The Default led screen when turned on got white screen
The bought one has no display.
Tried External Monitor - No display.
17:23 - Did he jump start the laptop from those connector pins? How did he know which pins to jump start it? Is it different for each laptop?
u short to ground 1 pin at a time, eventually u find the power button and it works
If the graphics chip is faulty, and the CPU has integrated graphics, can I basically remove the graphics chip and let the integrated graphics on the CPU do the job?
If the motherboard fail beacause of gpu you can also disable it by removing gpu voltage regulator but only if its discrete graphics chip (with integrated intel graphics card on cpu)
thx Ill check iy
Can I still remove the gpu voltage for the discrete gpu even if it is still functional? Mine works for about 30mins before getting too hot and then the screen gets this distorted color schemes
Hi. I have this issue. My motherboard is dead, I ordered a new one so I see this as a challenge. My motherboard is Asus K53SD rev 6.0. I turn on my laptop, power button is on, caps lock is on, little led light (marked as light bulb) is on, but my screen is black. Fan works normally, I can hear the hdd spinning. I tried all those easy fixes; switching ram, taking out cmos battery, holding power button for a minute, etc.
I tried the external display via vga and hdmi. Nothing. So my suspicion was right from the beginning, dead graphics chip. I disassembled the laptop, took apart everything from the motherboard and tried the bare test (just motherboard with cooling system connected to external display); still nothing.
I even tried cutting power to graphics chip and creating it to UMA (I took out it's voltage regulator); still nothing. I checked my display (learned that from one of your videos), there is 19v, 5 and 3.3 power supply.
Any help would be most appreciated.
By the way, your videos are great learning material. I learned alot. Thank you.
I use this electronic tinkering as an escape from my stressful job and my stressful life. It calms me down.
please give me a reply if you have found a fix for that...we have the same issue
James Domaboc, reflowing your graphics chip is the solution. I did it a while back, and it inhaled new life into my dead motherboard. I just checked it, works just fine, but I already installed a new motherboard. My old one was killed by the heat. This time I cut out 6 cm circle inside a bottom laptop cover, just below the graphics chip. Installed a small 5v, 5 cm diameter cooling fan. I covered it with a stainless steel grill I scavenged from my old desktop power supply. Soldered its power to USB slot. Now fan starts when I start my laptop. No more overheating.
Nice video - and thank you for sharing your insight about what is really wrong with these gpu - the problem is in the chip not the bga solder pad. But then why did you heat the gpu from the bottom? If you reflow the gpu from the top where actual silicon is exposed, then it will take lot less heat and is safer. I did mine at 330 deg c/ 50 seconds from the top and it worked fine.
he did that to avoid the sudden thermal drop and to stabalize the chip into position with the melted lead, cause heat can do two things on a chip either expand or shrink and with that chip exposed to an environtment with alot lower temp itll cause it to crack/break / or sometimes pop like i did with mine lol and i do precaution with it like slowly lowering that temp while pulling the hotair away but it did cracked ived learned it the hardway like sorin did ive done gpu reballing the same way now just dont forget to change that thermal pad or thermal paste cause theyd be dried sometimes cause of the heat
Sorin, thermal pads are next to nurofen 😁
Thnx sorin .. i have a question : what's the purpose of heating up the chip ? How can this bring it to "life" ?
It basically 'revives' dry solder joints around it and somewhat restores conductivity. It works, I've tried it on bigger Gpus but they'll need to be replaced eventually. Maybe 3 months, maybe 6 more months. Depending on average usage time/intensity.
Thank you for your explainings. I work about graphic card repairing. I am a civil engineer but i like repairing some electronical cards. Now, i try to repair a laptop: Acer Aspire 5750g. I have 19 volts at all of power supply. I have 4 ohms at gpu power supply, 16 ohms at 2 rail CPU power supply, Stand by powers 3.3v and 5.0v ok. All of power supplies gives their voltages, only CPU power rails can't give their voltages when i push the power button. When i push power button: power led is coming up, i/o chip starting test of system, cooling fan turns and it goes to off about 5 seconds later. What do you thing about that?
HDD? Keyboard?
Nice work. I have the same laptop and the screen is white when I turn it on. What’s the problem?
replace the screen or replace the flat cable
Hello, at what temperature and for how long should I use my heat gun. On heat gun I see speeds 1, 2, 3, 4, but I don't know what temperature they have.
I don't know why I remembered Metro 2033
But why did u heated up the back of the chip, and then took the heat away? You tried to see if the fan will start, or you wanted to re-melt the chip soldering? So the fan didn't start, what that meaned? Then you decided the old thermal is not working well? Where is the thermic sensor, on the chip?
Put a copper shim on there also - reduces heat on the graphic chip and CPU - suggestion only
I've done that and the temperature decreses about 10 celsius degrees and the laptop lefe expectancy increses a lot. Of course, depending how do you use the laptop
7:56 - What is that chip which is to the right of the underside of the GPU?
The motherboard chipset
@@filenotfound__3871 Oh, thanks! 😃😃
Copper shims work real good also of absorbing the high heat
The gpu had a die though, it could scratch it.
Can the graphics chip cause the labtop to not turn on, Even when there's 19v and 3.3v and the switch the lights just flash for some seconds 😳 then turn off.... can u help?
You know this guy means bussines when he has a nivea bottle and a tooth brush on his workbench 🤯
Edit: 2 BOTTLES OF NIVEA!! (Im scared)
Is there any way to disable the dedicated graphics and use the integrated graphics (if integrated graphics is available)
simply disable it from device manager, my dell Inspiron's gtx 850m crash on every games with "application has been block from accessing gpu" shit and now I have to use intel hd 4600.
Hi,. Excelent job . I got hp pavilion dm4t-1000 . But my HP starts and Windows works except fan is running 100% and CPU side of laptof overheats like crazy. Cleaned thermal paste but didn't help. I guess because of this my 9 cell battery died .I heard problem is ATI chip(that's how i finded your video).
So does CRAZY OVERHEATING means ATI chip is dead or not working and this tutorial will help me?
Thanks, Appreciate your job.
I have a Dell Dimension 3000 it's not showing a pitcher on the monitor so I googled it so tell me if this is the problem so I can get a pitcher Baroni701
The 3000, has no AGP or PCIe slot, you need to buy a PCI graphics card.
The 3000 troubleshooter is here BEV ??? Another thing I pulled up on google is change the Hard Drive and Dvd Drive or change the TFT and 1 CRT or the HDD but what will be the simplest thing for me to do to get pitcher and the Tower comes on ???
What if you only get a picture when it get hot? Like blocking the fan and it overheat then picture show
Time for a new motherboard/laptop.
If I don t have a heat gun what can I use, like to heat with the lighter something
Hi, GPU? I have no BSD or artifacts but when i turn on, the screen either has picture normal or totally black- tried hot and cold do diff. . I have swapped out CPU, Ram, PS (19V good anyway at mosfets) When it does work, Video plays normal for about 5 mins then gets jittery like frames dropping out. NO ERRORS or BSD. MB will stay on forever and fans spin as usual. Could it be PS around GPU or only GPU? Already changed paste, pads ect and heatsink was clear. Thanks
How do I know if it's my graphic chip ? All I know is that it comes on but won't display on the monitor. I have a Dell Dimension 3000 ??
Connect external display. If still no pix then its GPU chip.
I have a laptop Toshiba it is not turning on i think power is good, fan spinning, ram also fine but screen not coming i tried to connect with external monitor it not worked also so can it be caused from motherboard components or maybe motherboard itself? It happened when it is on and i can say i remember it had a much noise from fan and overheat. Can it be caused graphics card? any way what can i do ?
i am also facing this type of issue my laptop showing black screen after your video i will do like same maybe it will be resolve. What is the name of this heatup machine how to get?
500 degrees for 20 secons, tha's the sweet spot...?
My friends laptop has a gtx 1060. It shows picture but it doesn't run high quality games and overheats. Would that graphics chip need to be replaced?
You swapped the RAM to see if the one in the first slot was bad? Your videos are great, thanks for taking the time to teach these skills.
indeed, thank you
I have an Acer E5-571G-719H the HDMI and VGA ports do not work, the nvidia drivers install and work but the intel graphic driver does not install. acer want to replace motherboard but that costs more than the original cost of the laptop
@electronics repair school: Hi,
Some keys of my Lenovo X270 keyboard were not working so I've decided to replace it myself.
I was very cautious and followed the service manual and best practices and could remove the faulty keyboard successfully.
I plugged back all the ribbon cables and everything into its place.
The issue is now the laptop turns ON (green light, the fan also turns, there is no beep unless I remove RAM memory) but the screen remains black.
I've tried to connect it to an external monitor (and keyboard/mouse) but it didn't work.
I've removed the CMOS battery for a while and put it back on but it didn't help.
I have a big issue because when I wanted to connect the SSD drive to another laptop to access at least my data and back it up, it asks for BitLocker key which I never set (only had Windows session password) and I believe it is security/tamper protection from the old laptop.
Could you please tell me what can be the issue? The GPU?
Thanks a lot for your help.
They should put the GPU on socket just like they used to do for CPUs. But nowdays they put everything on BGA, that is planed obsolescence , it is by design.
The problem is not on the solder balls between chip-motherboard, chip itself it's broken.
This fix will be work a couple days or couple moths, permanently fix and for a long time period is a reball the chip with new balls or beter new chip and new balls, but keep up good work
1050 ti gtx right under memery chip i broke 2 chips c175 and r535 what can i use to replace them and or re wire it , what i get on my screen is memory artiffact still and i still get picture ,,, if you need a pic ill send you one
why thermal paste on the processor and thermal pad on the video chip? is it bad to use thermal paste on same processor and video chip?
I use K5 pro paste from ebay instead of thermal pad. You should try it.
sir my games keep crashing in Asus tuf fx505dt I did everything like reset OS, update driver and etc but none of them worked. if that's gpu's fault can it be fixed?
another fantastic video !!!!
excellent tips and tricks to repair GPU :)
Thank you so much. its very helpfull
I Have the Same Laptop, It turns on and shows BIOS and even Windows Loading Screen but after some Loading some type of RED Dots appear on the Screen and Windows Didn't Boot Up. Can anyone tell me whether my GPU is Faulted or NOT?
If only reflowing was a permanent fix. It's all rubbish, even reballing. It will last a few months before it fails again. The GPU is dying, it needs replacing. The Dell 5010 is the worst laptop I have ever seen for GPU failure.
The 5010 does run quite hot, often the cooling fan doesn't kick in until around 65-70 celcius, this isn't the case on similar Dell models such as the 5030. 5040 and 5110 where the fan steps in around 55-60 celcius.
yes dell, i have a dell inspiron 1545 and the gpu chip has been a nightmare ive fixed like 5 times i just keep it going
what can i do if i have 2 graphic card but one is disappear and not even recognizes in device manager this happen with my laptop toshiba satellite L50 and the graphic card that disappear is nvidea m950 4GB memory but the intel graphic card is working fine. please help me with this because i'm tired try to fix it
I have a laptop in which the screen has several blurry horizontal lines with a wider one near the bottom. Sometimes the screen has only the one wider white line near the bottom and the rest of the screen is black. I can't ever see any text on the screen so I can't boot up. When I try connecting an external monitor to the unit, the monitor gets no signal. What would you suspect to be the problem with this unit?
ed nja defective screen controller.
how much does it cost to heat the graphic card? because I have same problem..
Hi there, one question, can thermal paste be used instead of thermal pad ?
Not that easily, since the gap is too big and the pressure too low for thermal paste usually. The elasticity of the thermal pad is required for constant and proper contact hence heat conduction.
Hello, I would be happy if you could advise me what a problem with my laptop,I have a laptop .toshiba satellite a300 247, That served me faithfully for several years, I watched movie and the computer it was connected to the TV through a HDMI. connection, Suddenly
The computer stopped transmitting an image,But the computer stays on, I connected the screen through a connection VGA, But still see nothing,
Love your diagnosis, Thank you very much !!!
did you solve the problem ? same happened with my laptop also ... mechanic saying motherboard need to change
@@ashsean6818No, I'm sure this is the board problem !
How do you boot up laptop like that,with pincers ?
I will try for my samsung laptop. I did it front side before, not back side. Maybe it's works if I'm lucky 😄
Greetings,
Can you please help?
I have an Intel Core™ i3-2350M CPU with only UMA Graphic (I looked into the motherbord there is nothing but the CPU and Chipset)
When I Install the graphic driver the screen goes black.
I wonder if changing the CPU would solve the problem!
My laptop is Hp Probook 4530s
@hamza C. you dont have graphic chip the cpu is the grapchis if the board has deadicade cpu change the cpu..
I am not a professional laptop repair guy but why did u overuse an arctic mx4 ? U just need to put a small line on the cpu and pressing the heatsink will get the job done.
My laptop motherboard has a amd dedicated graphic chip. If i completly remove the chip, motherboar will work or not? My laptop is HP pavilion dv6 6165tx
Hey,what did you do ??? Have same problem
petition for electronics repair school to tidy up his dam room
Dell 3510 graphics ic location plz
My friend, the color of the screen is shifting in my laptop and there are lines, but when I reflect it to the monitor with VGA, it works perfectly smoothly. Is the problem with the video card or the leptop lcd?
In my experience, if on the secondary screen its working fine, most likely it's your laptop lcd screen
Touching is a good idea for overheating parts
can u fix a dedicated graphic card in laptop?
i use 961 kester to reflow chip and lasts longer than just reheat.
Can we replace the chip?
How did you know that gpu is faulty.. it can be backlight problem or so.
if is the backlight, you will have picture on screen
"First lets check the fan, the graphics chip usually dies from over heating" yup can confirm, my wifes laptop fan was totally full of fluff when i pulled it apart after the display went all funny
In this case you have partial solution because if you don’t make a reballing of gpu in 2 or 3 month the problem will come back
Stefano SDA Not that bad, actually! Have had machines go for 2 to 3 more years!
the balls is not the issue, it's the chip itself is faulty, there's nothing else you can do if you don't have a chip to replace.
What if you disable the graphics and remove the chip without replacement. Will the laptop work
Then I go with reballing, is there any precaution the user can take to elongate the life span? Thank you
My on lenovo y570, with separate gpu gt555m, when is loaded with game, friezer game, show black screen after cople of seconds! When I puth gpu off, evreting is OK. But I can't play hard game anay more.
Please help.
Thank you.
Vaso Vulović Find that same chip on EBay, take it to a guy with an IR machine and a clean fucking workspace (Guy's workplace is a dump) have him replace the graphics card by desoldering the old one and resoldering the new one, and have him clean the board and fan. Should work like new. If you can, improve the RAM.
Hey nice fast job...how much $$ for a job like that..?
I’m learned a new lesson
Why ociloscope still on when there is no nead of it .............
Great Quick fix! Hi Sorin,Good day to you! How can your determined easily if its a Graphics, Memory or Bios corruption issue? I think all of them showing same symptoms, it turns on with power led on but has black screen. Thanks on this video. More power to your channel!!
you can't :))), but if is a overheating issue and a dedicated graphic chip, probably its a graphics issue
Thanks Sorin!
u r welcome
Just watched this today. I wish I had found this video a month ago because I had the same problem.I eventually fixed it but by replacing the graphics chip which is very difficult. One comment. You can generally tell it's a graphics chip problem and not corrupt Bios or memory because the hard disk light will act like a normal boot sequence and when it stops will continue showing activity when you hit "Enter" as Windows continues boot sequence even with no screen lighting. With BIOS and memory problems you won't see this sequence of hard disk activity indicated by the hard disk light in almost all failure modes where no video is visible. Again, great video.
what can i do if i have 2 graphic card but one is disappear and not even recognizes in device manager this happen with my laptop toshiba satellite L50 and the graphic card that disappear is nvidea m950 4GB memory but the intel graphic card is working fine. please help me with this because i'm tired try to fix it
Here I have same problem on my laptop, technician said I have to change motherboard, is there any solution ?
Whatever happened - happened. But in the future build the habit of changing the thermal paste (maintenance) every spring and you won't have an overheating laptop on your hands. It's like a car - you can't just buy it and drive it without an oil change. And once you forget and do serious damage, the solution is never as cheap as regular maintenance. ;)
pardon me sir are you using 500 f or in celcius on hot air and how much air at the setting. thanks
hi, full air
Do you give a guaranty on graphic chip?
depends, if the laptop died because of a bad overheating , i we will give 3 months
😂😂😂
I noticed you used paste on cpu and looked hard for a pad for gpu is there a reason you did
not just use the paste on both?
ranny day those kinds of chips don't have a surface to transfer heat like the casing of a cpu does! So, they go with pads to act as that intermideary mateial. Also! It depends on the pads u use. Some specify to apply some thermal paste and some don't! But generally, you don't because it ends up being a waste! Those laptops are never really used for heavy tasks, anyway! The real thing is to keep a clean airway and to keep the CPU at good temps always! Also! That pad on the back of the chip will help a lot to dissipate heat to the keyboard! So, next time you open up your out of the shelf laptop for dust blowing, put one of those guys in there!
is it possible to replace a graphics chip in a laptop with a better performing one?
Nope. Best bet is to use eGPU if you got Thunderbolt3
It needs a reballing , why you don't do it
ma cosi dura 10 giorni ,ci va fatto il reballing se no è solo tenpo sprecato
Si la mine sta Nurofenul langa e-lichid :))
i will like Ur video , u are very very grate man
u are big engner مهندس كبير
Hallo
I had thermal paste replacement for my laptop hp artist edition , after reassembling all component back again , it works but with black screen, I tried to connect external monitor but nothing comings, appreciate any Suggestion or help
You shouldn't do this. It might last for about 2 days and it's pain in the @$$ to open the laptop again. The best shot would be to disable the discrete graphics or replacing the chip. Chips are not expensive.
So many people are gonna go buy a heat gun and warp the shit out of their board. Probably wont even heat the board before they start.
is it possible to replace a graphics chip in a laptop with a better performing one?
A hair dryer works fine on the Xbox 360. Heated it up, played for about a week before it crashed again. My PC however. Seems like I have it in the oven once per week
the VGA port still sends a picture in this case
Great action.....
Crazy knowledge, but the worst desk i have ever seen hahaha. Keep them coming! We learn a lot!
If it is known that it is the graphics chip, then why don't replace it? A chip costs about 50$ I think.
How long should I heat at 500 degrees the chip?
Back of the chip, 7-10 sec
Electronics repair school awesome thank you
very good, thanks ...