I'm new to riding and looking at a z400 I imagine that it'd be compatible with that seems how it is with the ninja 400? But does this essentially turn your bike into a semi automatic? Like you still have to shift with your foot but you stay holding the throttle down the through the shift and you dont need to pull the clutch lever?
@LifeInTheDM Iam Racing hear hard now since 2020 and I have to say I can count them missshifts on two hands, not really common. And when that error occur it’s 99% an error from me, not from the bike. you have that problem ? Is a blipper installed ?
Hi Cameron✌🏼 Sorry i can’t right now.. the bike is sold and the next project is in work. Contact IRC components for help. The email is listed in the video. Good luck.
Hi Normally when the throttle is completely closed there should be no movement at all. That feeling only occur when your not fully of the gas (the cable Must me totally lose) while breaking. ✌🏼
Hi Normally when the throttle is completely closed there should be no movement at all. That feeling only occur when your not fully of the gas (the cable Must me totally lose) while breaking. ✌🏼
Hi Normally when the throttle is completely closed there should be no movement at all. That feeling only occur when your not fully of the gas (the cable Must me totally lose) while breaking. ✌🏼
The website says it requires an "aftermarket throttle", but doesn't specify exactly what that means. Other than mounting fabrication, are there additional parts required in order to make this work?
@@slickshit_at meaning when solenoid actuates. Do you tune after how many milliseconds of touching the shifting lever the solenoid actuates? Or just install as is?
Did you test it on the street or track ? When shifting is smoth (no humping, or the resistance on the lever is to hard while shifting) your Fine. train the oil after some rides and check if there’s any metal inside (filter it and swipe with a strong magnetic tool threw it, small amount of metal is normal) When the oil is clean! Your good to go 👌🏻
lol you have to disasseble the bike that much just to fit QS & blip??
What size tires you used? And size sprocket? Thanks you
How do u install locking pin inside the blipper cylinder
It says to install on throttle side
Any photos or video would be good
Instructions very vage
would you happen to have an in depth install video? Thanks!
Yes iam planning to do so. Iam waiting for the next Ninja 400 to get my hands on.
Stayed tuned guys ✌🏼
Iam really interested in a Video of installing the blipper 😄
hey. how do you feel about this blip? any things to update over the 2 years?
4 sure
Here is the video
th-cam.com/video/ppS9ABvWLHM/w-d-xo.htmlsi=ZCy1j2c39pISiEK3
I'm new to riding and looking at a z400 I imagine that it'd be compatible with that seems how it is with the ninja 400? But does this essentially turn your bike into a semi automatic? Like you still have to shift with your foot but you stay holding the throttle down the through the shift and you dont need to pull the clutch lever?
Late comment but, what length shift rod did you order for your IRC kit or the ninja 400?
How often are you getting the dreadful false neutral?
@LifeInTheDM Iam Racing hear hard now since 2020 and I have to say I can count them missshifts on two hands, not really common. And when that error occur it’s 99% an error from me, not from the bike.
you have that problem ? Is a blipper installed ?
Hello, can you list the settings you use on the controller? I have a very hard time understanding the manual, thank you.
Hi Cameron✌🏼
Sorry i can’t right now.. the bike is sold and the next project is in work.
Contact IRC components for help.
The email is listed in the video.
Good luck.
Welche bremspumpe hast du für hinten verwendet? 🤔
Hi ✌🏼
Einfach ne 14er Kupplungspumpe, Hersteller egal.
Hi. If you switch to a lower gear, do you feel that you are bouncing it on the throttle? Does the throttle trigger move?
Hi
Normally when the throttle is completely closed there should be no movement at all.
That feeling only occur when your not fully of the gas (the cable Must me totally lose) while breaking.
✌🏼
Hi
Normally when the throttle is completely closed there should be no movement at all.
That feeling only occur when your not fully of the gas (the cable Must me totally lose) while breaking.
✌🏼
Hi
Normally when the throttle is completely closed there should be no movement at all.
That feeling only occur when your not fully of the gas (the cable Must me totally lose) while breaking.
✌🏼
The website says it requires an "aftermarket throttle", but doesn't specify exactly what that means. Other than mounting fabrication, are there additional parts required in order to make this work?
Hi ✌🏼
I used a basic universal Moto-Cross throttle because they are cheaper. But you can use domino Racing throttle to.
@@slickshit_at do I have to tune when the solinoid fires?
What do you mean with fires ?
@@slickshit_at meaning when solenoid actuates.
Do you tune after how many milliseconds of touching the shifting lever the solenoid actuates? Or just install as is?
Did you test it on the street or track ?
When shifting is smoth (no humping, or the resistance on the lever is to hard while shifting)
your Fine.
train the oil after some rides and check if there’s any metal inside (filter it and swipe with a strong magnetic tool threw it, small amount of metal is normal)
When the oil is clean! Your good to go 👌🏻
What Track is this??
It’s a track in Austria.
One of the nicest for those smaller bikes to ride at
Where are you from ?
@@svenmayer4665 from germany whats the name?
@@DaCommentChannel www.ps-racing.at
Die strecke ist in der nähe von Hartberg in der wunderschönen Steiermark.
Ooh auto blip on a Ninja 400!
Nice!!!!
Hi, thinking of putting one of these on my gsxr1000 k7 as it's a cable throttle. Was there set up needed or was it plug & play? Thanks, Gaz