1G Plate Stick Welding | SMAW
ฝัง
- เผยแพร่เมื่อ 17 พ.ค. 2024
- In todays video we got Welding Fly Duck stick welding a 1 inch plate with the SMAW process. The root pass is welded with 6010 and then is filled and caped with 7018. The welding electrode used is a size 1/8" to fill it up quicker.
#WeldTube #southcoastweldingacademy #Welding
WeldTube Store
www.weldlife.com/
WeldTube Social Media
Instagram: / weldtube
Facebook: / weldtube
TikTok: www.tiktok.com/@weldtube?lang=en - แนวปฏิบัติและการใช้ชีวิต
![[TH] 2024 PMSL SEA W2D2 | Summer | โหดจัด ซัดไม่เลี้ยง](http://i.ytimg.com/vi/TJa9d7tpSP4/mqdefault.jpg)
👇WeldTube Store👇
www.weldlife.com
Nec
Been welding for 7 years as of 2022 and I still watch to learn more tricks and help better beads for myself
Never stop learning
@@CodyNovian you are correct sir, and you can never practice to much! Gotta keep that muscle memory lubed up
16 years here and still learning things
welding is a lifetime learning. everytime you weld. you learn. and experience grows.
Do you think you could look at my welds on my TH-cam short?
I just began my welding journey and this is self-explanatory. Thank you so much. Love from Nigeria 🇳🇬
I'm just coming the end of the MIG part of my UK level 2 City and Guilds and after this I can't wait to start stick welding again, loved it on my level 1 course.
Just so much sound advice in this video clip, great instruction from an awesome instructor. Thank you 🤜🤛
Memories of welding school at Hobart in Troy, Ohio - where they make the machines. One of the best welding schools in the world. They knew how to turn out welders from raw recruits.
This video shows proper arc gap very well. Nice work.
Bruh I want to apply for the school, how please?
@@andrewamoh Hobart School of Welding Technology. Troy, Ohio
Every time I watch doesn’t matter the time day or night I wanna go grab my hood and burn some rod!!!! Great informational video. Started a new company about 6mnths ago and had to do my 3G it had been a while since I tested last company I was with for 5yrs. Did a 6G with them but the new company wouldn’t except theirs
Put some strong backs on the root side, with a mouse hole cut out . Ie two pieces of 12mm thickness flat bar,with a half circle cut out in middle of flat bar , doing this also will stop the plate being tacked on the root. And keep the plate welded more flat ,unless this has been preset for distortion.
You make a great instructer. Thank you for all the information!
great instruction and arc shots!
PS Thank you for your service!
HOLY F*****K! In less than 10 minutes, you covered EV-ER-Y-THING I did wrong in 3 hours of class yesterday, and how to correct it! Thank you!
I used my GI Bill to go to welding school 12 years ago. Best moved I’ve ever made.
When doing these full penitration welds we always preheat and use a needle gun between each pass to destress. Also post heat to to the same. All of our welds are ultrasound tested as well. Been welding for over 35 years, so much poor welding out there! Hopefully your video may help!
See that pull. That is why weldments need to be stress relieved.
nice job getting information out there to in experienced and new to the skill potential welders!
Beautiful 1" test plate, I had to chuckle at all of your comments as you were filling it up, after welding for over 45 years, ( now retired), and full penning welds on plate and wide flange beams as heavy as 700 lbs a foot, I've done and said everything you have just said to myself as I was filling joints up to a cover pass, always trying to make that Cover perfect, lol, you look like a great welder, hope these young guys and gals pay attention to you, they will learn some good stuff!! Great video, thanks...... and best of Luck to your channel. My GI bill put me through welding school in the 70's. Made a good living all my life, welding is a vital trade for anyone willing to actually work for a Living!
He failed to allow for metal shrinkage as it cools.
What I love about welding is how satisfying it is
Very nice quality welding, the amount of deflection on the test plate is insane, we always put some offset pre deflection on plates of this thickness but I dont think we would have got anywhere near this.
Great welder... thank you for your service marine
Im a young beginner this gave me so much knowledge and actually now seeing it i am eager to start practice this is the video i have been waiting for you guys teach me everything i need to know and learn 💯
Bot
Always remember ,hold the sides and the middle looks after it’s self,this reduces undercut works on all butt welds in all positions
Great video Rosendo and WeldTube Team🤜🏽🤛🏽💯
Makes me want put my hood on and weld !
Appreciate you brother David!
Ikr
@@weldtube 💯🤜🏽🤛🏽
I work in a building that has some exposed w-shapes that look to be 1" thick, or close to it. These beams have been mechanically coupled when a connection is required and I always wondered why as there are 4 rows of 9 bolts each sandwichng the beam connection with 1" plates that extend at least 24" each side of the connection. That is literally 24x6x2=72 bolts! I assumed it has something to do with the difficulty in welding members of this size and watching this video helped my understand possibly why mechanical attachments might be favored due the amount of heat this many filling passes generates. Thanks for sharing.
Thanks. Very informative and instructive.
If I saw this video years ago I wouldn't have quit welding because I still love it😓😓😓
Aquí iniciándome en este mundo de la soldadura, mi manejo del inglés es bastante básico, pero logré entender bastante su explicación, mil gracias por el video. Mi prueba de certificación estaa unos días. Gracias nuevamente.
Cualquier pregunta, no te apenes en preguntar estamos para ayudar 👌🏾 deja tu pregunta y trataré lo mejor para ayudarte. Saludos 🖖🏾
Thanks for uploading the video. I was doing this same with lighter stock in a welding class. From watching you, I had my arms properly positioned, but my face wasn't close enough to the weld. You have your hands just above your ears at the start. I will try to remember that on my next try. I am getting a better helmet to see the outline of the weld too. I had trouble seeing the edges of the metal bevels using my current helmet. As a result , I wasn't going straight like I thought I was.
I was Wielder from my Child, But I'm Steel Learning From you, You Do Better Keep it up💪
What do you do about the warping on parts this thick, as seen in the video the part comes bowed. Is this where you would use a symmetrical bevel groove so you add even heat on both sides?
I am planning to build a DIY yacht/ship with one inch thick steel. I am planning to mould the internal circular frame. However I had a doubt, can I weld the external sheets of steel on the frame with a stick welding machine. What type of welding do you suggest for marine applications?
Thank you, now I know how to apply this techniques in our school.
There's 8 in our night classes at college and we are all finding it almost impossible to get full penetration on the root weld. It looks like the simplest weld to do!! I've had over 25 attempts on 8" long practice pieces 😮.
Going to try this on Tuesday night 😣
Run the amperage just hot enough to before it burns through and turn it down a bit, let the puddle build, use whipping motion if using SMAW
@@mrnobody5567 thanks 👍
Are you supposed to go counterclockwise or clockwise
Turn it up
@@bubbaslaughter8379 been up, been down, moved fast, moved slow 😂.
Passed the course since then, distinctions with a bit of how do you say... Ingenuity?? 😉
It no longer is flat. Huge bend where the weld is. How do you keep it flat?
the 2 plates aren't flat anymore?
Dios los bendiga por compartir el conocimiento . Saludo desde Colombia ..Ibagué
The power of HEAT !!! 1 inch plate bended like it was made from plastic 😀😀
Thank you for sharing, wich shade did you used for this video on your helmet?
I watched your electrode movement, I can learn to weld better after watching your video
thank you for sharing the video
Very nice! 6010 is a more aggressive rod than the 6011 or the 7018 and that’s a nice smooth weld!
Do you grind the metal clean before you start stick welding? It looks like did grind the metal at the joint
Retired welder 6 yrs still watch weld videos
First welder on TH-cam teaching how to weld properly I’ve seen, there is another a white guy but he’s more of tan or shop welding. This guy is as good as me, I’ve been doing these for over 6yrs and have NEVER failed one. I never done guide lines but I guess I’ll try it next time.
Top essa raiz e esse enchimento e acabamento, parabéns.
awesome👍👍
nice stick welding🔥🔥
keep it up😎😎
Just curious why not bevel both sides and weld both sides?
i`m only required to do TIG weld at work but this looks so good
I worked at Electric Boat for a few years. The test to get in was a 1” plate, flat and vertical. TIG, I’m old school from the USAF. I would have preferred, 6010’s.
That was amazing. Looks like a robot did those welds...(I guess one actually did! Haha) Beautiful work!!!
I lowe yo man you are best welding teacher ewer im see 😎🙋♂️ 👍👍
With beveled open root, does material thickness really effect Amp settings that much? I was doing 3/8 material with same rod, bevel, same gap and land and 80A was just too hot. Hard to control keyhole. 70A turned out being the ticket. With equal gap an land an bevel the point of penetration is equal in both cases. that means the only difference is heat absorbance from the sides right?
Would a 0° work angle 15° travel angle be better on the cap instead of 15, 15
IM 18 AND I STUDY IN SKILLS SCHOOL.well actually it's very hard learning weld but thank god I found this vid.I practice for a lot of time(waist school rod lol)until I found my own style in weld btw thanks
waste all the rod you can, it wont last forever brother im right there with you
Desde Mexico Saludos tengo 16 años compre una elite 200s para aprender a soldar gracias por el video
Big Semper Fi back at ya brother
I’ve never done a flat plate test , do they actually give these ?
Welding continuously caused warp/distortion?
i learned how to weld from an old dude back when i was 12, that put gas torch in one hand and a rod in the other and made me learn that first. then i went to stick, Mig and then Tig. he showed me how to weld cast iron, aluminum, anodized aluminum. this old guy from WW2 showed me a lot about welding. an old machine shop reminds me of him. thanks for the video.
I have my smaw tests coming up hopefully this helps
Thanks dude! 💪👌
Very well explained brother nice job
you did that real well.
Great Video Fibally. Do this for 3G & 4G too! Thanks Dude
hello sir. can i ask how many welding electrodes did you use? and
what is the length of the plate?
Good jod idol🙋♂️ im Welder from Philippines🇵🇭thanks tip how to good weld👍
After the hot pass on base metal that thick you need to transition to a 5/32 diameter filler rod. I worked at Newport News Shipbuilding and you would get reamed for welding flat down with 1/8 electrodes. These schools need to teach students to carry a larger puddle and get that joint filled.
some body who knows..
You still live in Hampton roads ?
I work at newport news also 19 years x18 (mof) and now I'm an instructor 6 months in and counting
Straight drag is the move for me on the root !!!!!! But to each there own
I've got a half inch test with 7018 coming up, any advice?
It reminds me my welding course in college long time ago.
Thank you for sharing this video
Your videos are very help full please sir upload more videos welding related
Lovely root run
Im new in welding sir? Im working in water filtration, were working using plate, im curios were doing root pass in the back of the bevel, i want to know sir if this is correct?? Thanks in advance for the answer
Nice tips idol... god bless...
very impressive....you are my idol.....
That's the 👌 best knowledge 🎉thank alot
細いビードで仕上げることは日本であまり見ないです！やってみるとなかなか難しいです！
良い仕事してますね！👍
I stopped welding for like two years cause there wasn’t a job around me hiring at my experience level but I want to get back into but it’s hard with little to no experience what should I do
The other plate is bending upward from the heat. Would that be a problem?
Toda la soldadura es con 6010 o terminas con 7018?
Good stuff 💯
lost me at puddle connect but yea.. definitely cool to see people that know what they're doing show others :) +1. 10/10 would recommend.
I started stick welding today, wish me luck 🤣
আপনাদের কাজ আমার খুব ভালো লাগে এবং আপনাদের দেখে আমি এই কাজ গুলো সিখেছি
I want to change jobs, and was wondering what the starting pay would be. I know the academy is here in Texas. Houston to be exact. Im currently making 18.25 at my job but grown tired of it because of some circumstances and im looking at different options.
How can I avoid the 5 degree angle that You had that comes from the heat distorcion?
Good job done 👍
Teknik penembusan yang sangat baik..
Man i miss welding, and especially stick welding, TBH i also enjoyed Oxy /Acetylene welding
Great video. You’ve earned my sub.
What do you do about the warp though?
I don’t even weld and I enjoyed that video 😂
what kind of helmet he is using ?
terima kasih.. thanks for yours video..👋
beautiful welds i love this video
Yes practice makes perfect and
Thank you for sharing knowledge ✌🏻😉
I miss the one young instructor he was awesome
Good job
Well done.
I keep getting my sticks stuck how do I fix that, been stick welding for a week
why did the piece end up as a V shape when it started out with a flat surface?
Love from Bangladesh ❤
So why when doing all the .passes post root pass do you have the heat focused on the center not the stock? I thought you were supposed to walk it back and forth so as to better direct the heat and penetration. Yea I’ve done it wrong for 20 years ……..but nothing broke, I think😅