Hi bro , I have Onkyo receiver tx sr875 , problem is can on but few minutes cut off heself and also no sound anything , can you give me any info for this problem tq
first no sound and it going to standby mode so problem might be HDMI board and any series short cause no sound and shutoff. but this is assumption only without proper checkup i can't tell u clearly
Hello Master! I have an Onkyo HT-R380 5.1 home theatre amplifier and I have a problem with it... When I start a multi-channel movie (DTS-HD MA) after a while the relay keeps clicking, and you can hear it, it's like going from stereo to mono. I'd try to fix it, but I don't want to just rip it apart :) Can you give me any ideas on what to start with? Thank you!
hi bro, please check the frc flex cable first which is connected from front panel to main board. and check the key1 and key2 signal from front panel when the mode changes automatically . if u find any abnormality please check and solve. plus please replace all button switches when u disconnect the panel for checking. because buttons also cause automatic mode change. hope it will solve your problem. and do not disturb the main board or ucom board because as per you mentioned fault is not related to main board and ucom board
Hi Sir, Am using Polk Hts 10 SW with denon Avr model S760H. They are new just 2 months before I installed at home. Subwoofer stopped working randomly once in a week or twice and then am hearing sound automatically without doing any fix after 1 or two hrs. Checked wires they are all finely connected and using branded LFE cable only. Any idea what Could be the reason for this? Fyi no heating observed on avr as am using cooling fan. Pls advice when you get time
@@fixavreceiver i aleady check dts ic voltages and arrays and resistors all are perfect i also check Dsp firmware its all perfect but still it has noise ..... i think this is Dac ic faulty?
Hi brother, I'm using ONKYO HT-S 5600 and have no dolby atmos. Shall I change the board to work as a dolby atmos supported system. What is the approximate cost for this? If it is possible
சூப்பர் நண்பா. சர்வீஸ்நன்றாக உள்ளது
Back to Back Videos Vera level Sir ....Your Knowledge is so valuable and it means a lot ....
superb bro....I'm waiting from last november....
Wonderful job Bro.why is it that the receivers suddenly go dumb? High usage?
Please share the best muti meter at reasonable price
I am using fluke 115 it is best for my use
Bro.unga Addres uploade pannunga bro..
Super Balaji garu
Sir yamaha av receiver htr5130 volume control venum sir kidaikkuma
super
Super sir
Suprr work 🙏🙏🙏🙏🙏🙏🙏🙏💕💕💕💕💕
Great Job ❤🙏
Good work 👍
I want this pcb sir it's available
Welcome sir
Good job.
Super bro 🎉🎉🎉
Super sir
Good job
Welcome back
Hi bro , I have Onkyo receiver tx sr875 , problem is can on but few minutes cut off heself and also no sound anything , can you give me any info for this problem tq
first no sound and it going to standby mode so problem might be HDMI board and any series short cause no sound and shutoff. but this is assumption only without proper checkup i can't tell u clearly
Bro AV receivers la entha audio ic use panranga. Long time doubt.
Super Anna👍😃
Gud job bro
Hello Master!
I have an Onkyo HT-R380 5.1 home theatre amplifier and I have a problem with it... When I start a multi-channel movie (DTS-HD MA) after a while the relay keeps clicking, and you can hear it, it's like going from stereo to mono. I'd try to fix it, but I don't want to just rip it apart :) Can you give me any ideas on what to start with?
Thank you!
hi bro, please check the frc flex cable first which is connected from front panel to main board. and check the key1 and key2 signal from front panel when the mode changes automatically . if u find any abnormality please check and solve. plus please replace all button switches when u disconnect the panel for checking. because buttons also cause automatic mode change. hope it will solve your problem. and do not disturb the main board or ucom board because as per you mentioned fault is not related to main board and ucom board
Sir, do you have Hdmi Board for Onkyo Integra DTR-6.8?
No sales only service. For board replacement please contact dealer
Ic dts..for..tuner usb and video ya?...
Sir ht-r391 set with no sound adv7623 changed but same condition please help
adv7623 is a HDMI IC not a sound IC, if its Dead Short and Input Voltage short then only audio will not come. otherwise audio is a separate section.
Sir same model but problem is lift right Chanel after 5 minutes off only left right chanel pls...help
Hi Sir,
Am using Polk Hts 10 SW with denon Avr model S760H.
They are new just 2 months before I installed at home.
Subwoofer stopped working randomly once in a week or twice and then am hearing sound automatically without doing any fix after 1 or two hrs.
Checked wires they are all finely connected and using branded LFE cable only. Any idea what Could be the reason for this? Fyi no heating observed on avr as am using cooling fan.
Pls advice when you get time
Hi anna yen inda OKNYO la neriya issues warudu what can be the reason is it heat? or design bad?
❤❤❤🎉
Enta irukkuradhum Idhe model than but enakku audio didect lam work agudhu...
But no sound
hello ..sir i have onkyo htr670 it has cracking sound but i play with pure audio or direct mode its work perfectly ..what is the cause ?? please sir
check dac and dts circutary also check dts ic voltage supply
@@fixavreceiver i aleady check dts ic voltages and arrays and resistors all are perfect i also check Dsp firmware its all perfect but still it has noise ..... i think this is Dac ic faulty?
Hi brother,
I'm using ONKYO HT-S 5600 and have no dolby atmos. Shall I change the board to work as a dolby atmos supported system. What is the approximate cost for this? If it is possible
It's not changeable
Nice
Anna av receiver onkyo tx-sr307 audio output varala
Please ping me on whatsapp
IC purchase details konjam sollunga brother
please chat on whatsapp
Where do we get these chips
❤
Denon 2311 1 hour movie running but set off repeat one hour on but reson service phone Chennai please sir
sorry bro, i don't know anyone in chennai
Sir
Htr 380
Same problem
No sound output
Any contact no for you
Thanks
Sir sem problems my onkyo av receiver HTR 380
Athalaam thozhil ragasiyam ayya saamy😂😂 elathaim solikuduthutal avangale sari panipanga
Is this pcb available and what will be the cost
No sales bro, only service
I have a similar problem with onkyo ht r370
Anna dts ic price evalo varum
Where to that IC? And price please help
please chat on my whatsapp
சகோ என்னிடம் இரண்டு Onkyo avr இருக்குது அதை சர்வீஸ் பன்னவேண்டும் உங்களது மொபைல் நம்பர் வேண்டும் சகோ
என்ன சகோ ஏன் போன்நம்பர் தர இயலாதா
full address and contact details in all video description please check it sir
Balajee
❤❤❤👍👍👍🌹🌹
Thambi yanaku ounga number adresse vendum yen mail luku anupavum
All details in every video description sir
YFFA
Sir work panringala
yes working why
@@fixavreceiver sir 2 years I'm waiting sir sai 2 amplifier iruku koncham panni kodunga sir
Sir I'm already calling sir next month 15 edukranu sonninga sir
எல்லா மெக்காநிக்கு போலத்தான் நீங்களும்
Sir service pannum phone number please
hi sir, all details are available in all video description
App ka contact number share karo
Super bro 🎉👍👍
Great job ❤❤❤
Please upload my avr servicing video
Pls share his contact. I have to send my receiver
❤❤❤
thank u bro