Farmall M Restoration Pt 2 | Disassembly and Engine Rebuild
ฝัง
- เผยแพร่เมื่อ 13 ก.ย. 2023
- 1942 Farmall M restoration part 2. Assembling Engine and disassembling transmission.
This project was submitted to the 2023 Chevron Tractor Restoration Competition.
JAMSI Channel: / @jamsionline
Thanks for watching! - ยานยนต์และพาหนะ
![ตรงที่เดิม - ฝน พรสุดา [ต้นฉบับ :เบส ขวางหวัน]](http://i.ytimg.com/vi/c5YnbGEztI8/mqdefault.jpg)
This is not your typical millennial! 😄I found this channel after spotting a old Farm-all lawn-ornament and thinking "that would be fun to get running", so I searched TH-cam and found what looked like the exact tractor being restored. Great content!
Good job youngster
Nice to see a young fella take an interest in these old tractors and also know how to use an acetylene torch.
Great job
Andrew, your power-less backing skills as your dad pushed you off the trailer and avoiding the flower bed/rocks was most admirable. ;-)
Thanks. Have to act quickly and calmly in situations like that.
@@thesmallenginekid lol right? Of course you know it would've been YOUR fault if you hit anything tho. ;-)
Impressive skills at such a young age Andrew!
Well done, Andrew, by the brief glimpse we got of it finished, you are going to win the show!! I have an old David Brown P25 you have now enthused me to restore. Great Videos !!
👌👌👌👌😁😁❤❤
I love it Andrew, old tractor revivals and restorations are just a joy to watch. Thanks for documenting and sharing with us
Hello your very good. Nice to watch someone with skill and knowledge. Have a great day.
Great job !
Tractor looks great !
Amazing video !
Thanks
Fantastic work, Andrew, “ just a few acres Farm” on TH-cam, Pete has a series of videos, completely rebuilding Farmall MD
Felisisades x tu gran trabajo amigo excellent .
Just love what you manage to do with old tractors Find you interesting Best wishes for Southampton Hampshire England UK
My brother pasted 2 years ago and he loved rebuilding tractor 2m 1md 3 he you done a great job
I love your passion for restoring these old tractors. Great work 😊
so true! ❤❤😁😁😁😁👌👌
Great stuff Drew! I hope you won. i got a place you can store it and visit anytime you want. Get hitting the books!
Thank you very much for the video. 👍🤗👍🇸🇯
at 11:45, you should always tighten from the middle of the cover out to the ends... so if there's any wrinkle in the gasket, you are "chasing" it to the ends
Amazing video !
You definitely have knowledge in mechanics, and skill !
Nice job !!
Wow. I had a childhood friend who was ambidexterous. Havent seen another one till I saw you use hammer with either hand.Pretty rarae thing. Great work on that tractor.
Μπράβο Συχαριτηρια τέλεια δουλειά....την καλησπερα μου από την όμορφη Ελλάδα Δημήτρης...
Great to witness so much knowledge in a man so young. Keep it up young man.
Great video!! You are so knowledgeable! 😊
Wow, Andrew - you've been busy! Looks great! Glad to see you back on the M.
Well done young man, you are very knowledgeable and meticulous in what you do. Refreshing to see a young man with such dedication to his craft.
Esos Tractores eran una maravilla trabajando son muy fuertes con un arado de 4 alas volteaban mucha tierra Saludos desde Texas
This is a tractor like all the older tractors you can work on them yourself and they have style like older trucks and cars 😊😊😊😊
Please remember when ever using a cutting torch on wheels make with a tire mounted on the wheel sure the tire has no air in it. The super heating of the air in a tire next to a wheel that is being welded or torched will make the tire explode. Has killed more than one person.
Good point. Thanks.
Great job big daddy keep the videos coming!
Great video!!!!!!
Always cut away from you!!!! I would make a hydraulic press. I did at 15 and still use it in my old age.
Hydraulic press has been on my project list for 2 years. I’ll get around to building one eventually.
Nice work, heating up the block would ease so set in the sleeves.
Fab Restoring. Good Job.
Beautiful tractor!!
Enjoy your videos! I was/am concerned to see you striking Cast Iron with your Hardened steel mallets, Maybe a Brass bar between the cast and the steel mallet would be a better impact material. Or a Brass headed mallet, or softer alloy. You will be damaging cast iron parts or machined gears at some point and wishing you had used a brass bar at some time,. How do I know... I have made this error myself. Life is a learning curve for all of us. On the whole nice work!
Good job young man. I enjoy your attention to detail. Although, as thorough as your engine rebuild is, why not grind the camshaft? Those old tractors had notoriously badly ground camshafts in them due to the sheer volume of engines they were making. It's a '42 with a factory wide front? Rare indeed considering the war. Nice job.
Best regards from Indiana.
Factory wide front, it has the setback plate as well to retain same wheelbase as the narrow front. I would have got a custom ground performance cam but I wound not have had enough time to get it done before the restoration competition.
@@thesmallenginekid still and all, it's a beautiful thing. You've done a heck of a job. Does it get to work?
Wow. Talented.
where did you get the parts and how much did it cost?
❤
Awesome work, you have my vote!
In my opinion you should win this restoration great job man
Awesome!
Excellent.
Pete Larsen from Just a Few Acres would be happy with your work on this tractor I'm sure. He is very experienced with renovating old tractors. Cheers and keep up the good work Andrew. Good Luck in November.
Make sure you bring pictures of your restoration job. Let the judges see that you managed this without the benefit of a garage. Hardcore man.
Dirty disassembly and cleaning outside, then we moved it in the garage to stay clean for reassembly.
i voted for you . Good luck
did you pack the oil pump with grease or vasiline before you installed it so it will prime?
No, just some assembly lube.
Wow very good tractor workers comp and all tractor workers
Andrews you could shoot a 10-hour video non-stop and I was sitting just plug my phone in and watch it from front to back and a lot of times I watch them two or three times to make sure I didn't miss nothing
Гильзы молотком не забивают, либо пресс, либо винтовой сжим!!!!
excellent video
Ok so I guess I'm gonna be the crotchety old man here but hope to spread some knowledge here so you don't damage things. So I grew up on a farm many years ago and we had a couple of Farmall M and 400/450 tractors and rebuilt them a couple of times as a kid. There is something you need to know about the blocks on these old Farmalls. And I hope some other folks are taking note of this. This tribal knowledge is being lost as the old farmers that rebuilt these in their machine sheds with OE IHC parts are dying off. Back in the day Farmall's machining tolerances for the sleeve bores in the block varied ALOT. What they did is actually had various different OD of sleeves to fit the various different bores in the block. The sleeve bore actually had a sliding (if I remember right) A-E scale of sleeves and the difference between the OD of a A to E sleeve could be .007" which is ALOT on a press fit sleeve. Farmall when machining the blocks would actually stamp on the deck the on what size of sleeve you needed. You were moving way too fast and the camera didn't focus but you can very clearly see an "A" @ 8:35 which is the smallest. It appears but I can't be sure the 2,3 were C sized. I'll bet the other sleeves probably went alot easier and you wonder why. That explains why you broke the sleeve and why it got so tight so fast.
BTW, folks Farmall is not the only company that did this. Because the OE stuff is gone and everything is now a nominal size you need to be checking the sleeves and boring these blocks accordingly.
This is super interesting information. Thanks for watching and commenting.
A lovely project
Me thinks harbour freight should offer TH-camrs a hefty discount with all of the fee advertising they receive from you . Nice to see you young fellers taking an interest. Good job.
Amazing job Andrew!……….. 👀😎👏👍🌟👋✌️🙂🇨🇦
I’ve done two fordson tractors that looks a good one
Awesome job
Pakistan 🇵🇰 I love sir
When you switched to the steel plug, I was wondering if that would happen.
The same happened installing sleeves in a Case DC4 engine. NEVER use steel, always a dead blow.
Figured out later the steel drives the liner down with such force the sleeve flange snaps aff in tension. TWANG!
Best wishes from the far North.
When I put new sleeves for my pistons i put them in dry ice instead of the freezer. Didnt need to hit them with anything. Just dropped right in.
Next time I rebuild a sleeved engine im going to use liquid nitrogen to install sleeves.
That transmission was disheartening to see. Looks like somebody ran it with water in the oil. Hopefully you can find a good counter shaft, or build that one up and use a lathe to get it back in spec. Final product looks great. Did you have to get another sleeve? Never seen one break like that. Looks like it was defective. Hopefully they gave you a replacement.
I did end up getting another sleeve. I think it was my fault breaking it. I hit it too hard at the end.
Old farm alls have a tendency to leak water into the transmission. The location of the cover/access plate is the design issue.
Breaking a sleeve is my biggest fear when building an engine. My W9 needs sleeves, but very expensive NOS is all that’s available. You can buy a whole set of “M” sleeves for the price of one W9 sleeve. It’s crazy. 😢
I thought they had the same engine?
Под блок нельзя было подставить упор, чтобы он не тресся на консольно револьвере при монтаже и демонтаже гильз? Как там болты еще не вырвало от таких ударов!
True good
@andrew hanna what part of New Jersey did you get this from?
near Vineland, it is nice in south Jersey, lots of farmland
@@thesmallenginekid nice that's only a couple towns over from me the end results looks awesome!
Is there still a good supply of spare parts for them still.
La suite !!!!
Where did you get sleeves and tires
You can get sleeves from steiner. I got tires from a local company. Saltamontes Tire in Bridgeport CT
Put your sleeves in the freezer before you slide them in the block. Makes life a bit easier
Цікаво те що за такий період стоянки трактора задня гума як нова!
Eu gostaria de saber a tragetoria dos tratores Santa Matilde.
😊
And when your done it will be good for another 80+ years!
Im going to assume that you let the air out of the front tire before you used that torch to cut that bolt ?
Right, someone else also let me know the air should be let out before heat near the tire as we know heat makes air expand. Thanks for the reminder.
Good job 👍
⚙✔➕✔
Look I know 10 different people will tell you how to do this rebuild. But listen I would not use HI tack to hold your gaskets in place. Once this drys you will never get that gasket off without scraping a little bit at a time off. I came across a gasket held on by hi- tack and I finally got the gasket off by spraying with gasket removal spray. I would spray the gasket down and let it soak in. Then I would scrape a layer off then spray soak and scrape a layer off. It don't seem like much but that oil pan gasket to what seem to be an hour to get to the point I could use a wire wheel to get the last of it off. I will never forget about that one hi- tack moment in my life. Also you have a John Deer shirt on when you restoring a red IH tractor at the end of the videi.
The electrics: are they 6v or 12v ?
In witch contry made it?
Why didn’t you put the liners in the freezer first before bashing them in the block
😀
I suggest you put the sleeves in the freezer for a few hours first
We did overnight. Next time I am going to bring the block and sleeves to work and use liquid nitrogen.
All the new tractors & combines use hydro static transmissions so there no
more having to split the tractor in half to do a clutch or whatever. Glory Days!!!
Of course in a few short years all equipment will be electric & THEN repairs
will really be a breeze!
!
Every system comes with its own challenges to repair.
Too bad you lost the sim card fine job overall though
When watching the video it seems that most of the shock forces from hammer are lost by the lack of support at front of engine 😢
How did you learn all of this
Read manuals and then figure it out. Make some mistakes. Commenters here and on TT have been helpful
hould pre the liner in rathjer than drive them in.
Didn't the head need planed
going to zagrays in octorber
Unfortunately no I’m at college. Hopefully will make it to spring and or summer show next year.
VISAÓ BRASIL
NOT 10 MECANICO
ASS BRASIL
REVISAÓ NOT
10 VIDIO MOTOR TRATOR
Tule wciska się na ZIMNO!!!
Good working bro 😊😊😊😊 support me 💯👍