Superb video. I have to appreciate the efforts taken to make such video with background audio. Actually your video speaks for itself. You are highly skilled man.
@@dailyhandsdiy Do you have any workshop? If yes, please share contact details. If not, can you suggest a good and trustworthy workshop/mechanic ok in Bangalore.
I don't run a commercial workshop, just does if someone comes with an issue. Its in Kerala. Im sry mate, i dont know much about workshops in Bangalore.
Hey man, I have a ford fiesta 2005. No speed readings. I replaced the abs sensors in the wheels, and its still not reading. ABS fuse is fine. Whats next?
Some fiesta have a gearbox out speed sensor inbuilt...do check if equipped. also this could be anything from, faulty wiring, abs module, meter cluster. If you dont see an abs light in the dashboard, probably the cluster might be at fault
@@dailyhandsdiy Thank you for your response. The abs and engine warning light is on. The other day I drove through a massive puddle as I didnt see it and it started to read speed... Until I turned the car off and then it stopped again. Ill check the abs module and wiring! Thank you!
I was drifting on ice and somehow i ripped the abs cable, speedometer not working, no power sterring, no ESC, engine light on, rough idling, no acceleration and strong vibrations while accelerating, happily i was able to fix it myself. Thanks for the video!
Thanks for the comment. just a quick question, after you changed the cable, was there any change to your speedo, power steering, and acceleration. Also did the lights turn off?
Hi just came across your channel and would like to say thanks for posting your videos, I have learnt so much about job's that need doing on my Ford Fusion tdci, great content 👍👍
Hello sr. i've got a ford figo 2015 and i've got a faulty code p1934 related to speed sensor but the scanner does show which tires is faulty. The car goes limp mode once and awhile. Are the front tires responsible for the speed sensor like you showed in this video? good video though!!
Hi pls do get the live data from each wheels. Modern scanners can do that. if a sensor is bad you will get deviations in that data. Next thing would be a fault in wiring or connectors. Also do check of the car is equipped with vehicle speed sensor in the transmission.if yes that might give you this fault.
Hey bro, I have a 2021 Ecosport 1.5 TDCI. It has TCS Off switch which is not working for me, nothing happens upon pressing it and the switch doesn't illuminate as well. Additionally at times traction control turns on by itself (visible on instrument cluster) and stays until I turn off the engine and start again. Could it be because of faulty TCS switch or there could be something more. There are no DTCs and MIL and vehicle runs absolutely fine otherwise. Would appreciate your suggestions.
Hi there, Din understand wht just said, but when you replace the sensor be sure to check the rubber seal inside the connector. Have seen many cases,these seal wear n water gets inside damaging the sensor.
Hi, nicely explained , my Fiesta's front sensors are faulty, both left and right, I get a brake warning apart from the abs warning in the dashboard, does this anyway limit the vehicle acceleration or top speed ?
Tengo un Ford focus 2007 dos puertas, las llantas delanteras están frenadas, el mecánico me dice que debo cambiar el dispositivo a donde va conectado el sensor abs de la llanta. Espero haberme explicado
Hello my Ford Fusion 2008 the tyres in the front stays bent changed the suspension lower arms struts everything still the problem persists and abs and handbrake light stays on.... Can you help?
Bent? am not sure what you are saying...did you mean extream camber angle. abs n brake light flashes if brake fluid is bad or nearly empty or the abs sensor or coded ring goes bad.
Hi my car has a problem when I press the accelerater pedal it shut down, I replaced the MAF and checked timing however the problem persists what could be the problem I do get the ABS light sometimes it is a Ford figo tdci
Hi there, ford does limit power when abs fails but wont stall or shuts down. Pls do check the fuel status of the car ie, fuel filter, fuel pressure ranges and also injector performance too.Also check the air filter.
My car was TATA VISTA TECH VX 2015 MODEL. I feel vibration and steering wheel shaking while hard braking in my car. (Breaking in 80-90 kmh speed). WHAT WILL BE THE PROBLEM? In addition, 1. At the spped of 130-140 kmh, steering wheel shakes. Clearly iam feeling the shake. The shake starts at the speed 120kmh only. 2. Having brand new Neo alloy wheel and michelin Tyre (85% button). These setup in all wheels. Share ur ideas bro?
The one when braking is because of warped up brakes, disks need resurfacing. And the one when speeds abve 120 is not balanced wheels, needs a proper wheel balancing.
@@dailyhandsdiy Thank u for the reply bro and for ur valuable time. Warping, can't able to understand. Could u please explain it bro. Did i need any cleaning of breaks... Frontwheel disks and Backwheel Drums. Kindly explain bro. My car was done only 34,890 kms only. Me the 1st owner. Very rare use only.
Sure bro, warping means, when disks heats up certain times the metal deforms and forms bumpy and super polished surface in some areas of rotor or disk. This can happen any time. So, when we brake it slips on affectd area and grabs on other area. This cause vibration on brake pedal and steering. Resurfacing will chip away the top layer of disk and makes it like new.
@@dailyhandsdiy Thank u Bro. Did u have done this to ur car? Any videos h having bro, to do it by ourselves. If so share the link bro. Tq. I said to clean the breaks last oil service time. The company charged 800 for break cleaning...
Its not brake cleaning bro, its resurfacing. Its actually not something we can do at home. Need a lathe to do the job. I have done this but you need to remove the rotor and give it to a lathe to get it done.
For the module or for sensor...for sensor i guess its around $100 for a piece. You can even get an aftermarket at lower prices from ebay. If module, its roughly said amount
P1039 FORD Vehicle Speed Signal Missing or Improper I think speedsensor not good buth i have a mondeo duratec and this car have no speedsensor on the gearbox of speedsensor abs not good why i have nou faulf from abs
Hello sir Left front wheel speed sensor Left rear wheel speed sensor Right rear wheel speed sensor Control module u300049-AB U3000:49 Battery voltage What is the main problem?
A snapped wire can be fixed. Just strip the wires, slide in a heat shrink, tie the wires and close the repair by heat shrink.For better sealing use some silicon sealant on the repair and heat shrink it. will be waterproof
Que la paix soit sur vous, j’ai un problème avec le compteur de vitesse une fois qu’il sert une fois Makemesh ou Lavishaj Cadran Coulommètres ou Cadran Mazout Kishvio Kelio Ford Fiesta modèle 2007 Mazut
Superb video. I have to appreciate the efforts taken to make such video with background audio. Actually your video speaks for itself. You are highly skilled man.
Thanks mate..made my day
@@dailyhandsdiy Do you have any workshop? If yes, please share contact details. If not, can you suggest a good and trustworthy workshop/mechanic ok in Bangalore.
I don't run a commercial workshop, just does if someone comes with an issue. Its in Kerala. Im sry mate, i dont know much about workshops in Bangalore.
Hey man,
I have a ford fiesta 2005. No speed readings. I replaced the abs sensors in the wheels, and its still not reading. ABS fuse is fine. Whats next?
Some fiesta have a gearbox out speed sensor inbuilt...do check if equipped. also this could be anything from, faulty wiring, abs module, meter cluster. If you dont see an abs light in the dashboard, probably the cluster might be at fault
@@dailyhandsdiy Thank you for your response. The abs and engine warning light is on. The other day I drove through a massive puddle as I didnt see it and it started to read speed... Until I turned the car off and then it stopped again. Ill check the abs module and wiring! Thank you!
I was drifting on ice and somehow i ripped the abs cable, speedometer not working, no power sterring, no ESC, engine light on, rough idling, no acceleration and strong vibrations while accelerating, happily i was able to fix it myself. Thanks for the video!
Thanks for the comment. just a quick question, after you changed the cable, was there any change to your speedo, power steering, and acceleration. Also did the lights turn off?
Everything came back to normal, i was driving a ford fiesta 2011 1.6 diesel
Hi just came across your channel and would like to say thanks for posting your videos, I have learnt so much about job's that need doing on my Ford Fusion tdci, great content 👍👍
Made my day mate 😊😁
Hello sr. i've got a ford figo 2015 and i've got a faulty code p1934 related to speed sensor but the scanner does show which tires is faulty. The car goes limp mode once and awhile. Are the front tires responsible for the speed sensor like you showed in this video? good video though!!
Hi pls do get the live data from each wheels. Modern scanners can do that. if a sensor is bad you will get deviations in that data. Next thing would be a fault in wiring or connectors. Also do check of the car is equipped with vehicle speed sensor in the transmission.if yes that might give you this fault.
Hey bro, I have a 2021 Ecosport 1.5 TDCI.
It has TCS Off switch which is not working for me, nothing happens upon pressing it and the switch doesn't illuminate as well.
Additionally at times traction control turns on by itself (visible on instrument cluster) and stays until I turn off the engine and start again.
Could it be because of faulty TCS switch or there could be something more.
There are no DTCs and MIL and vehicle runs absolutely fine otherwise.
Would appreciate your suggestions.
Likely the switch I guess
Someone on a ford group I'm in this could damage the sensors, is this true ?I'm tempted to just replace the sensor the scanner said was at fault
Hi there, Din understand wht just said, but when you replace the sensor be sure to check the rubber seal inside the connector. Have seen many cases,these seal wear n water gets inside damaging the sensor.
Hi! What do you call that wire that is paired with the one you replaced?
Hi, nicely explained , my Fiesta's front sensors are faulty, both left and right, I get a brake warning apart from the abs warning in the dashboard, does this anyway limit the vehicle acceleration or top speed ?
Yes it does reduce the acceleration and if totaly gone, there will not be any acceleration. Jst idles.
@@dailyhandsdiy Thanks for the information brother, so time to buy a pair
Yup better do that, link to the same for nline purchase is given in the description.
Bro can u tell me how to fix oil leak from breather ford figo tdci engine.
Jst put a hose clamp on the pipe which connects to the top of engine.
Tengo un Ford focus 2007 dos puertas, las llantas delanteras están frenadas, el mecánico me dice que debo cambiar el dispositivo a donde va conectado el sensor abs de la llanta. Espero haberme explicado
Do you mean by knuckle joint.
Hello my Ford Fusion 2008 the tyres in the front stays bent changed the suspension lower arms struts everything still the problem persists and abs and handbrake light stays on.... Can you help?
Bent? am not sure what you are saying...did you mean extream camber angle. abs n brake light flashes if brake fluid is bad or nearly empty or the abs sensor or coded ring goes bad.
My abs scan for u3000, is it always the abs modul or could be the sensor
This happens usually when there's a wiring damage to module or the module itself. any correlation from sensor sets other code like C1234 or others.
Is this the same for a 2006 ford ka? Speedo and odometer not working. TIA
Might be different
Hi my car has a problem when I press the accelerater pedal it shut down, I replaced the MAF and checked timing however the problem persists what could be the problem I do get the ABS light sometimes it is a Ford figo tdci
Hi there, ford does limit power when abs fails but wont stall or shuts down. Pls do check the fuel status of the car ie, fuel filter, fuel pressure ranges and also injector performance too.Also check the air filter.
Hello Sir,
If ABS sensor not working does it cause hard break pedal?
ABS won't cause hard brake pedal but if there's a leak in vacuum pipe or if the brake booster is bad, can cause the hard pedal
@@dailyhandsdiy mine is 2010 Figo, is it possible to repair booster?
Can abs module cause engine system fault on my dash? Ford fiesta
Hi these, ford abs faults usually cause zero acceleration, abs light n brake check light lits up. Wont cause engine malfunction.
If i reverse the polarity i got the 570 ohms if i reverse again the polarity i got 1 what does it mean?
Yup it does that. Thats normal...i guess its cause of single polarity circuit or diode. The other value matters.
My car was TATA VISTA TECH VX 2015 MODEL.
I feel vibration and steering wheel shaking while hard braking in my car. (Breaking in 80-90 kmh speed).
WHAT WILL BE THE PROBLEM?
In addition,
1. At the spped of 130-140 kmh, steering wheel shakes. Clearly iam feeling the shake. The shake starts at the speed 120kmh only.
2. Having brand new Neo alloy wheel and michelin Tyre (85% button). These setup in all wheels.
Share ur ideas bro?
The one when braking is because of warped up brakes, disks need resurfacing. And the one when speeds abve 120 is not balanced wheels, needs a proper wheel balancing.
@@dailyhandsdiy Thank u for the reply bro and for ur valuable time.
Warping, can't able to understand. Could u please explain it bro.
Did i need any cleaning of breaks...
Frontwheel disks and Backwheel Drums.
Kindly explain bro.
My car was done only 34,890 kms only.
Me the 1st owner. Very rare use only.
Sure bro, warping means, when disks heats up certain times the metal deforms and forms bumpy and super polished surface in some areas of rotor or disk. This can happen any time. So, when we brake it slips on affectd area and grabs on other area. This cause vibration on brake pedal and steering. Resurfacing will chip away the top layer of disk and makes it like new.
@@dailyhandsdiy Thank u Bro.
Did u have done this to ur car?
Any videos h having bro, to do it by ourselves. If so share the link bro.
Tq.
I said to clean the breaks last oil service time. The company charged 800 for break cleaning...
Its not brake cleaning bro, its resurfacing. Its actually not something we can do at home. Need a lathe to do the job. I have done this but you need to remove the rotor and give it to a lathe to get it done.
Thank u...Clear and crisp video...
Any time brother..
Will an eobd reader tell me which sensor is faulty?
Its should have abs ebd protocols to read the codes.
@dailyhandsdiy8721 Thanks for the video... How to check rear side ABS sensor... In that I can see 4 pins and connected with two side cable...
Yes its actually for 2 sensors total 4 pins. Could easily check. the pins located diagonally goes to a single sensor.
how much is a ford fiesta abs? my mechanic is charging me for $1,500 for an abs
For the module or for sensor...for sensor i guess its around $100 for a piece. You can even get an aftermarket at lower prices from ebay. If module, its roughly said amount
@@dailyhandsdiy Thanks! Much appreciated!!!
Any time mate.
Thanks sir
I replaced the sensor but the problem persist...
Maybe the ring or teeth??
could be a wiring issue or the magnetic ring can be of fault.
Active or passive sensor?
Its an active type.
Sir rear wheel me ABS sensor Hota Hai Ki Nahi
ha bro charo wheelme hita he
@@dailyhandsdiy Wo same process se check hoga?
Aur uski Location Kaha Hoti Hai?
Ha same checking procedure he. Sensor vo drum k peeche bolted he ar connector, wheel support beam k center me.
@@dailyhandsdiy Thanks
any time bro.
P1039 FORD Vehicle Speed Signal Missing or Improper I think speedsensor not good buth i have a mondeo duratec and this car have no speedsensor on the gearbox of speedsensor abs not good why i have nou faulf from abs
Hello sir
Left front wheel speed sensor
Left rear wheel speed sensor
Right rear wheel speed sensor
Control module u300049-AB
U3000:49
Battery voltage
What is the main problem?
Might be an electrical wiring issue.
How do you know if ABS sensor needs to be replaced ? Any indicators
Yup abs light on the dash stays on.
My 2013 ford fiesta Abs cable has snapped when I was driving on a flat tyre
Well thats weird
@@dailyhandsdiy can this still be fixed
A snapped wire can be fixed. Just strip the wires, slide in a heat shrink, tie the wires and close the repair by heat shrink.For better sealing use some silicon sealant on the repair and heat shrink it. will be waterproof
Bhai price kitna hai ford fiesta abs sensor ka
4k plus for one side
Bro, it would be better if you my mention the price
Thank you sir
Glad to hear from you brother 😊
Nice information 👍bro thnx
Any time bro.
Que la paix soit sur vous, j’ai un problème avec le compteur de vitesse une fois qu’il sert une fois Makemesh ou Lavishaj Cadran Coulommètres ou Cadran Mazout Kishvio Kelio Ford Fiesta modèle 2007 Mazut
Hi, if possible please rephrase to English. Thanks
Part no. Of that sensor
Mine won't come off
spray some wd40,wiggle a little...
Super
Thanks mate :)
Wow