Thanks for posting this video. The Kohler toilet tank K-4441-0 with dual-flush has a very similar design. I was worried about breaking something until I saw your video confirming the forced rotation push tab release.
Thanks for the video. I installed 2 of these 8 years ago and had the same problem. I went to Sams and just purchased a new one for $109 and installed the new tank. It looks like an easy repair so will try next time but felt $109 to solve the problem was a cheap fix for me. Now I have a new bowl and replacement parts for the tank if I have any future problems.
Thanks Mike, this helped us get it apart. We had a plumber look at one of these a few months ago and he rub the drop of oil into either side of the o-ring before replacing it.
If your fill valve (the one with blue cap) keep dripping continuously then you will have to change it. You can use universal fill valve like Fluidmaster 400AC.
Thank you. Video is a great help. However, I cannot find a replacement seal. I see one at Home Depot for Glacier Bay, but it doesn't seem to be the same size. Any help would be appreciated.
Mine is 3 o 4 months old I checked the gasket and it is flexible and does no0t show signs of damage. It is still leaking I placed a little oil on it Lets ee if is solves the problem
Yeah it's a weird thing to try and describe. You need to keep twisting the canister and apply sort of upward pressure like you're lifting it off. You have to pull kinda hard and the tab needs to hit the little piece that sticks out to push it outward. Good luck!
Thank you for your informative clip. I end up have to replace the gasket cause the original has crack on it. Glad that I watch your vdo before trying and make mistake.
No the issue I was having was that the toilet would run and make weird noises. One of ours has that issue you're describing some times too and I think it's because the little plunger on one of the flush buttons so it's not depressing the actual flush in the housing enough. Hard to explain but try pushing in the flush as far as it will go and hold it there for a sec!
Thanks for posting this video. The Kohler toilet tank K-4441-0 with dual-flush has a very similar design. I was worried about breaking something until I saw your video confirming the forced rotation push tab release.
Thank you. I couldn't get it to come off without this cideo
Thanks for the video. I installed 2 of these 8 years ago and had the same problem. I went to Sams and just purchased a new one for $109 and installed the new tank. It looks like an easy repair so will try next time but felt $109 to solve the problem was a cheap fix for me. Now I have a new bowl and replacement parts for the tank if I have any future problems.
Thanks Mike, this helped us get it apart. We had a plumber look at one of these a few months ago and he rub the drop of oil into either side of the o-ring before replacing it.
I’m so glad I came across your video. I had no idea how to remove this valve. Worked beautifully.
Thank you. I’m a plumber and hadn’t seen this toilet before.
If your fill valve (the one with blue cap) keep dripping continuously then you will have to change it. You can use universal fill valve like Fluidmaster 400AC.
Great video. Helpful instruction. Worked as you described. Unfortunately that wasn’t the cause of why ours still runs.
May the flush be with you.
Just fixed my toilet thanks to this video!
Thank you. Video is a great help. However, I cannot find a replacement seal. I see one at Home Depot for Glacier Bay, but it doesn't seem to be the same size. Any help would be appreciated.
You are a blessing sir. I was sure I broke it when I started to twist it 😂.
Thank you so much! As a single woman I was able to do this myself.
This works for Kohler dual flush as well with the fluid master canister.
Can I change the canister to a universal one? And if so, what size is it? 2 inch or 3 inch?
Thanks for posting Mike.
those type of flush valves can be tuff to turn off , but they do come off
Thank you :) It worked beautifully .
Mine is 3 o 4 months old I checked the gasket and it is flexible and does no0t show signs of damage. It is still leaking I placed a little oil on it Lets ee if is solves the problem
Has anyone figured out the model number of the cannister so I can order replacement parts? Sam's Club is useless.
Had anyone figured this out? It what brand sells parts that fit this? Thanks?
@@markentress1286 Water Ridge A700245-GBG1 Dual Flush Valve
Found the label w the part numbers floating in my other toilet.
@@jasong9128 awesome! Hope it gets added to the video description. Great work. Thank you so much!
@@jasong9128 Just updated the description to include this info, thanks!!
Perfect! Thank you!
I am having this issue but I am trying to get the canister off- same as yours - do you push down?
Yeah it's a weird thing to try and describe. You need to keep twisting the canister and apply sort of upward pressure like you're lifting it off. You have to pull kinda hard and the tab needs to hit the little piece that sticks out to push it outward. Good luck!
Thank you for your informative clip. I end up have to replace the gasket cause the original has crack on it. Glad that I watch your vdo before trying and make mistake.
Thank you!!
Thank you so much!!
I have two of these toilets and the one is not sending out enough water when you flush. Is this the same problem you were having?
No the issue I was having was that the toilet would run and make weird noises. One of ours has that issue you're describing some times too and I think it's because the little plunger on one of the flush buttons so it's not depressing the actual flush in the housing enough. Hard to explain but try pushing in the flush as far as it will go and hold it there for a sec!