the only video that showed the back, which was super helpful to learn how this is working. Amazing that other videos don't do this simple thing to explain.
@@eldenboy11 do u know if this type uv riveT should/can(?) be used to replace the small ones that need to be removed from automobile door to get at the innards- like window regulator- of the door? thanks anybody and Jason yeah it's inchresting how the •how or why• is often ignored in explanations. This was decent video√
Sorry I just got how the darn things work thanks to your backside of metal look. Genius! Shows how critical matching drill bit to rivet size is though.
Would you need to tap the holes before or after you drill them prior to riveting the pieces of metal together? I'm planning a computer case mod. This seems to be the easiest way to do it since the skeleton of the computer case is already riveted anyway.
The hole should be drilled square, if possible separate the pieces and clear off any swarf that could stop the two surfaces mating. just as important as the correct diameter is the correct length, the rivets in this video are too long, which is not as bad as to short. Too short and they may pull through, too long and they might not pull up tight enough. Look up online the rivet diameter and thickness to be riveted and it will tell you how long a rivet you need. If the two faces to be riveted are not held together the rivet may swell between the two. If you do not want scratches on your metal beware that the rivet gun may jump as it snaps the rivet.
Don’t use aluminum rivets when you’re doing two pieces of still use the steel rivets And also use rivets short enough so there’s not a long stem on the back Of your work
Is it possible to stop the riveter from cutting off my pop rivets ? since the bottom is barely thicker than at the beginning so the rivet just comes off after a slight tug on the material with bare hands
If you select the right size rivet for the materials you are fastening (not too long) it will be minimal, the backside will always protrude more than the front though.
A screw or nail wouldn't work to fix two plates together like this. You could use a bolt, but only if you have access to both sides, a rivet can be used with access to one side only. A bolt would generally provide a stronger and longer lasting fixing. A bolt can be dissembled more easily and is reusable, but this can be a disadvantage for security.
why is this channel called Low Range Offroad, is it because Offroad vehicles use a lot of pop rivet? (such as the windshield on the 100 series and 200 series Land Cruiser/LX)?
First he says it's for when access to the back side is not possible. Then he says to secure the 2 pieces tightly together, and clamps the work in a vise. Makes no sense.
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 5](http://i.ytimg.com/vi/g5wpgeAIzMs/mqdefault.jpg)
![CAMPปลิ้น | EP.77[2/2] "รับทราบ" แก๊งเพื่อนรัก 10 ปี ที่ไปไหนก็มีตำนาน!](http://i.ytimg.com/vi/ifc0ofD51B0/mqdefault.jpg)
![[안방1열 풀캠4K] 베이비몬스터 'FOREVER' (BABYMONSTER FullCam)│@SBS Inkigayo 240707](http://i.ytimg.com/vi/_2HL-ogzzBU/mqdefault.jpg)
An absolutely *riveting* tutorial! thanks for making it :D
Clear, complete, brief. Well done.
Just want you want from an instructional video. Clear, easy to see what is going on. Thanks
Dude the video just got me out of a serious pinch at work. Thanks
Quite literally to. Your hand gets between the handles while it clicks hurts like a MF.
Great video nice that you showed to the blind side of the rivet. Tkanks
Video was perfect. Thank you for your work!
Thanks for the how to video, especially the back view on how they work!
the only video that showed the back, which was super helpful to learn how this is working. Amazing that other videos don't do this simple thing to explain.
@@eldenboy11
do u know if this type uv riveT should/can(?) be used to replace the small ones that need to be removed from automobile door to get at the innards- like window regulator- of the door? thanks anybody and Jason
yeah it's inchresting how the •how or why• is often ignored in explanations. This was decent video√
Really helpful vid taught me how to do pop rivets on the fly
This video helped me in my dt class today, thank you!
Sorry I just got how the darn things work thanks to your backside of metal look. Genius! Shows how critical matching drill bit to rivet size is though.
Would you need to tap the holes before or after you drill them prior to riveting the pieces of metal together? I'm planning a computer case mod. This seems to be the easiest way to do it since the skeleton of the computer case is already riveted anyway.
Excellent video. Thanks
If you close the handles, you won’t push against the spring tension when installing the adapter.
So are the protruding bits on the back crushed down also, or ground off?
Excellent presentation. Thanks.
Great video! Thank you.
Dude it’s so much easier if you squeeze the handles together to switch attachments. You don’t have to worry about spring tension or cross threading
Thanks for the video 👍
Ryobi One Drill, one of the best bang for your buck electric drills out there!
Awesome little instruction vidro. Did the trick for me.
Should the hole slightly larger than the size of rivet for smooth insertion?
Can I use an air rivet gun on plastic nylon rivets or is it too powerful?
Very useful, thanks!
Thank you, your explanation was just perfect.
Thanks for the video; though its always good practice to compress the gun when installing a new adapter, otherwise its very difficult.
That helped a lot, thank you
thank you for the tutorial
Thank you so much. It really helped me
Thank you!
Felt like I was watching a how to video by a member of the blue Man group.
Thank you! 😀
Thank you so much
NICE EXPLANATION.
cheers buddy :)) new job wednesday, should really help :D
Thank you
The frog says....
.
....Rivet.
rivet
Can you do a video of Riv-Nut ? Thanks !
The hole should be drilled square, if possible separate the pieces and clear off any swarf that could stop the two surfaces mating. just as important as the correct diameter is the correct length, the rivets in this video are too long, which is not as bad as to short. Too short and they may pull through, too long and they might not pull up tight enough. Look up online the rivet diameter and thickness to be riveted and it will tell you how long a rivet you need. If the two faces to be riveted are not held together the rivet may swell between the two. If you do not want scratches on your metal beware that the rivet gun may jump as it snaps the rivet.
First thing I thought too, those rivets are WAY to long for the material.
Thank you.
Good job :D
ouu yeaa :p
What if installing rivets in a scenario where jagged ends are not acceptable on either side?
Don’t use aluminum rivets when you’re doing two pieces of still use the steel rivets And also use rivets short enough so there’s not a long stem on the back Of your work
If you can access the far side and the material is soft or flexible put a washer over the rivet.
Thanks sir
Tank you
You can squeeze it to load a new adapter
Is it possible to stop the riveter from cutting off my pop rivets ? since the bottom is barely thicker than at the beginning so the rivet just comes off after a slight tug on the material with bare hands
I think your problem is the wrong length riviet
it's too good
Thanks.
thanks
Change the mandrel adapters with the rivet gun compressed !!
Thumbs up
Why are the inside of the rivets sticking out so much? Aren't they supposed to be flattened against the material just like the other side?
If you select the right size rivet for the materials you are fastening (not too long) it will be minimal, the backside will always protrude more than the front though.
riveting
Wow too much beautiful
Why the rubber gloves?
The rivet is too long. Seriously?
Thanks for this video. Is there any weakness to using a rivet compared to using a screw or a nail?
Keep up the good videos!
A screw or nail wouldn't work to fix two plates together like this.
You could use a bolt, but only if you have access to both sides, a rivet can be used with access to one side only.
A bolt would generally provide a stronger and longer lasting fixing.
A bolt can be dissembled more easily and is reusable, but this can be a disadvantage for security.
Rivets are way cheaper !
뒤에가 오목히 들어가야함에 많이 티어나왔어요>
they are called pop rivets because they are popular like pop music
so what is the easiest way to remove the rivets without a drill? I am taking rivets off a car door
@@No_bread-and-circuses punch of a drill? Heat? Freeze punch? Hahah
Smaller gloves.
why is this channel called Low Range Offroad, is it because Offroad vehicles use a lot of pop rivet? (such as the windshield on the 100 series and 200 series Land Cruiser/LX)?
Could be track vehicles like mine.
I had to cut a hole for my turbo+exhaust downpipe and now need to rivet the fiberglass together.
This is just... riveting.
रिपिट 4.8mm कहासे मगाये
🙂👏👍
Be sure to wear surgical gloves during this procedure.... as you never know when a pop rivet might be infected with the ebola virus.....lol.
Riveting content
Ok, why is he wearing rubber gloves?
You are so right! It didn’t dawn on me until you said something!. The rivets had the Covid I guess🤣
It looks like you never done this before🤔
never, ever wearing glove near a rotating tool, period.
He was just being safe from Corona.
@@AlleMeows my comments is from 7 months ago. Check video upload time please
@@YesthisisCharlie ik its called a joke
bad video, you used too long a rivet, didn't debur the hole
flytoday There’s always one!
First he says it's for when access to the back side is not possible. Then he says to secure the 2 pieces tightly together, and clamps the work in a vise. Makes no sense.
gas pedal
rivet way to long.
Weak hands
Who use RIVETS in Brazil 2019???
marquis edmonds Don’t they use mud, straw and goat hair!?
Wtf is 3-16. It's 2018, use metric unit
3/16" is a US measurement and has been since 1959. Maybe you should try the US measurement?
Andrew Hamilton Maybe US should try metric unit system.
Sourabh Roddey fuck the metric system, I hate that shit
You mean the US should try something simpler and more convenient?
Americans have to much pride..
Thank you