ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- FX Masterclass - World-renowned airgun smith, Ernest Rowe, shares a lifetime of airgun knowledge. covering everything from basic airgun maintenance to comprehensive step by step repair tutorials. ** Table of Contents Below **
In this Episode, Ernest demonstrates how to fully disassemble your FX Crown.
Table of Contents
0:18 - Stock Removal
3:45 - Degassing Rifle
4:42 - Pressure Gauges
5:43 - Regulator
6:52 - Valve Assembly
8:35 - Hammer Assembly
10:44 - Pellet Probe & Reloading Arm
12:00 - Power Adjuster
For a detailed schematic of the FX Crown, follow the link below:
www.fxairguns.c...
To order parts www.fxairguns-...
If you have a specific tutorial you want Ernest to do, please leave them in the comment section below.
These videos have saved me a ton of time on the phone and I really appreciate that aspect of the service that Ernest and FX USA have extended to their customers.
The best disassembly video that i have ever watched...Thank you!!!
Very complicated gun Ernest. Putting it back together looks to be a nightmare. I’ll watch the reassembly video. Regards from Perth WA 🦘🇦🇺
Great tutorial
As always best videos
Thank you sir
Great guide. Bravo!!!
very well done sir..!!
I just bought a Crown....thanks Ernest!!!
Great video, keep it up
How soon can we expect to see the detailed re-assembly process? Thanks for sharing your knowledge!
Re-assembly video is under production, will have it out by the end of the month.
@@FXAirguns we are waiting still. Hopefully the video will be uploaded soon.
Thanks
Ernest... Could you please upload a video of the installation process for your power kit for the fx crown?
Best gun in the world!!!!😍😍😍😍
God Bless Ernest !!! :)
gonna need a little tool here to get it out... 6:35 Where do i get that "little tool"? thanks...
My dream is to buy a fx crown. Unfortunately there are no resellers in Brazil.
Can you remove/replace the bottle while the gun is aired up? Example, switching bottles to keep shooting or no?
Can you please make one of these fir the streamline?
Great sir
Can you confirm that I can remove a carbon bottle which is under the pressure , just needs to be unscrewed easily even it is under the pressure , how it's regulated that simple ?
Yes you can remove it even it has air inside. There is a valve inside of your tank that keeps the air while removing it. I've done it already.
Nice
When are you going to make the assembly video????
Just watch this video in reverse!
Don't me a smart alec, the assembly is the important part.
@@primitivebow I'm not, it's actually not that hard when you know how to disassemble, just put new grease on the reg and o-rings.
Sure, but there is only one Ernest Rowe in the world and I would rather watch him make the assembly and not go by your advice. Good enough is not close enough for some of us.
@@primitivebow yeah, I know who he is... But like I said, it's not that hard. If I ever completely disassemble my Crown I will make video of the reassembly for you :)
How to fix a damaged cocking lever on FX Crown
What exactly is the problem ?
Have a new guy question. Just got a crown Continuum went to adjust the Regulator and just turning it you can hear air release sometimes the air just keeps hissing is this normal ? Thanks
Does anyone know the part number for the two grub screws that were removed @12:17 to release the valve adjuster?
how do you de-gas a fx bottle? when u have a crown? I've vids on how to do it with an impact.
estimado muy buenos dias, consulta tengo un hermoso crow cal 25 nesecito saber el listado de herramientas para la mantencion completa medidas de llaves allen, medidad de llaves punta corona, el tipo de extractor de oring, y lo mas importante que tipo de lubricante y cuales son los puntos de lubricacion para el rifle gracias quedo muy atento.
Dear FX! I have a problem with FX crown (leaking) and I bout it online. The shop located in Netherlands and I ordered into Austria. Austria is not a big air gun nation. Everyone use Styer or Glock(handgun).There is a distributor in Austria but the shop is not relay take care of air gun support (there is no business interest). I decided that I will manage the service by myself. For that reason I need a tools. The 3 special tools are need regulator piston, video masterclass disassembly 6.40 min.(the small plastic tube).The other on I need is ( Tweezer with grove) minute 8:18 same video.The 3rd one tool is in the video reassembly part one 15:18 min. I would like to buy this tools to make the job as it needs to do. FX already have this tools and the factory definitely can put together a service tool kit package to send it to me because the service is not available in Austria! The Distributor mentioned by phone conversation that anyway send the air gun it to Sweden to preparation. I hope somebody will help me to get these tools.
Recently replaced by transfer port on my.22 Crown with a High Flow V2 Dual Hole Transfer Port from HUMA, now when I fire the FX I have no power, so low it doesn't register on my FX Chrono, any ideas why?, I adjusted the reg from 60 to 80, but didn't adjust the hammer spring could this be the problem?
There is a tool at 6:47 is this tool possible to buy?
Ganda nayan sir sana magamit din ako nayan nasa mag kano kaya yan sir...
Will you do the Wildcat also?
The Wildcat .25 Mk2 compact. "Warcat".
hi can you advise where i need to look just heard a pop from my crown when fired now i have all air dumping down barrel
Zooheej 👍👍👍👍👍👍
Hi... I have leaking on my fx crown win i put the air bottle?
Can I ask if the crown regulator part D27 is the same as the impact same part? I received a replacement for my Crown but the parts bag said it was for the impact.
Tonka yes but it didn't improve anything so switched to a Huma Reg. Wonderful!
Hello Ernest, it was nice to meet you in Chile ... please, I need your help, I have an FX Crown .25 and a telescopic sight Aztec emerald 5.5-25 x 50 MM, in FX Airguns recommended me to use the regulator between 125 to 130 bar of pressure, which is perfect, I use a software called Strelok or Chairgun, to help me to have more precision at a distance and perfectly squares the distances with the MilDot.
When I change the .22 caliber cannon and enter all the data to the software, I completely lose the precision with respect to the mildots versus distance, I do not achieve the accuracy that I have with the caliber .25.
What will be the problem?
Please, I await your response.
Thank you.
This would be a function of the ballistic calculator. They can be a bit tricky to get them to do exactly what you want.....depending upon your equipment. Make sure you have all the data input correctly into the calculator.
@@BullseyeBob Friend, the data is well entered, in fact it works perfect for the caliber .25. Once I change the cannon, I maintain the pressure of the regulator and speed calculations, in addition to calculating the Ballistic coefficient, by the difference form in the fall of the poston. I read in the FX Crown manual that when changing the barrel I must modify and lower the regulator pressure and that is what I will do to test.
Thank you so much.
Siempre vuelve a medir la velocidad del diabolo luego de hacer cualquier cambio de calibre o en el regulador. La única variable que se afecta al final de esos cambios es la velocidad del proyectil y esa es una de las que se ingresa en la calculadora. Saludos desde Bogota weon!:)
Next video FX Royal
any advice please i have a .22 crown in 12ftlb and just got a .30 cal kit ive swapped this over and adjusted reg to 150 and turned wheel to 25/30 and adjusted hammer spring but im only getting 10ftlb how do i achieve 80ftlb what am i doing wrong thank you steven
Was your rifle sold as a 12ft.lb. model?
It was yes
@@theyorkshirelad. The best I know is those models have some type of restrictor that prevents them from making more than 12ft.lbs. I don't know where or what though.
Are you on the AirGunNation forums? Someone there will know for sure.
@@theyorkshirelad. www.airgunnation.com/topic/fx-crownimpact-regulator-mod-tutorial/page/3/
There is an allen screw under the scope in the main cylinder, remove that screw and you will get the full power.
大陆有卖么？
first one thanks
So?
Watched hole video an the part I broke is not listed in the parts its not the trigger plate it the piece that attaches to the trigger plate then the trigger it self the 1 side where it attaches to the trigger plate broke off an I can't find part any help great video but incomplete lol jk
If you need further instruction please call or email in for customer or technician services. If you are in the US you can reach us from 9 AM - 4 PM @ Serviceusa@fxairguns.com or (866) 639-0772
Mirip org indonesia
cash price
What's that sound: th-cam.com/video/ytTWgB4co8Y/w-d-xo.html ?
🤔
More technology more problem in the future,✌✌✌✌
alex barredo Agree with you 100%
Dear FX! I have a problem with FX crown (leaking) and I bout it online. The shop located in Netherlands and I ordered into Austria. Austria is not a big air gun nation. Everyone use Styer or Glock(handgun).There is a distributor in Austria but the shop is not relay take care of air gun support (there is no business interest). I decided that I will manage the service by myself. For that reason I need a tools. The 3 special tools are need regulator piston, video masterclass disassembly 6.40 min.(the small plastic tube).The other on I need is ( Tweezer with grove) minute 8:18 same video.The 3rd one tool is in the video reassembly part one 15:18 min. I would like to buy this tools to make the job as it needs to do. FX already have this tools and the factory definitely can put together a service tool kit package to send it to me because the service is not available in Austria! The Distributor mentioned by phone conversation that anyway send the air gun it to Sweden to preparation. I hope somebody will help me to get these tools.