It is possible to install the tubes in an upward direction, but it's difficult to maintain the aesthetics. Therefore, I decided to position the tubes at the bottom, although I don't like this setup. I think there's a reason why most TH-camrs build this case in a similar way.
After a lot of research, the general rule is that -so long as about 20% of the radiator is above the highest point of the pump, it'll run smoothly and at optimal conditions-. Tubes being at the bottom is actually ideal compared to them being at the top in the same vertical orientation. Them being at the top will cause burbling/ water noise, even with the pump below that. The opposite side of the tubes on most radiators has a dedicated reservoir where they design it with that it mind, for the air to get to that point and be trapped.
Guys, the AIO orientation here is perfectly fine. It's in the second best position it can be, with a top mounted radiator being the best position. Here, any air in the system gets trapped at the top of the rad... you will lose some heat dissipation efficiency, but this won't affect the pump because the liquid doesn't have to content with the trapped air. Reversing the tube orientation and putting them at the top of the rad will create the potential of trapping air where the tube enters the rad. It won't kill the pump, but it does have to work a little bit harder as a result of having to push the liquid through a smaller opening created as a result of the trapped air, and thus potentially lower the lifespan of your pump. Edit: And if you don't believe me, both Gamer's Nexus and JayzTwoCents have spoken about this very topic at length.
I think if you get the thermalright am5 plate for the cpu, you'll probably get some better cooler spread on that cpu. Seems alittle high than what it's suppose to be on those loads.
I like the comment of the GPU test: tested in horizontal position :) because in the final position, graphic cards don't like the vertical mode and it decrease a lot the cooling possibilities. I needed to use a waterblock to not be throttling
Intake is more effective than exhaust for CPU cooling. While it may increase the internal temperature of the PC case, this can be compensated by using bottom-mounted fans.
RAZEN 7 9800x3D (AMD AM5) CPU에 CPU 쿨러와 써멀구리스 추천해봅니다 (개인적인 선호부품 기재) (컴퓨터 하드웨어 선택 이전에 모든 부품들 호환성확인 및 실제 작동시 문제가 있는지 없는지 등등 충분한 공부와 자료수집은 무척 중요한 절차) 01 CPU (1개 선택하는 부품) RAZEN 7 9800X3D (AMD AM5) 02 써멀구리스 (1개 선택하는 부품) ARCTIC MX4 추천 03 CPU 쿨러 (1개 선택하는부품) (개인적으로 선호해서 추천기재한 3종류 제품중 1개선택추천) (공냉(AIR COOLER) CPU Cooler중에서 대장급제품들(2024년도 기준)이므로 수냉쿨러(Water Cooler)와는 다르게 누수우려 없으면서 9800X3D에 사용해도 쿨링성능이 충분한것이 장점) 3RSYS RC1900 CPU쿨러(AMD AM5 소켓지원 모델) / 또는 PCCOOLER CPS RZ620 화이트 CPU쿨러 (AMD AM5 소켓지원 모델) / 또는 PCCOOLER CPS RZ 820 (AMD AM5 소켓지원 모델) 3종류중에 1개 선택 추천 (부품스펙호환성 기재이외에도 실제조립시 다른부품들(램방열판,메인보드,그래픽카드,케이스 등등) 과의 공간간섭이 있는지 없는지 구매전에 확인필수) (무척 중요한 확인 절차) 컴퓨터 TIP 사용하다 문제생긴경우 데스크탑 저장장치에있는 자료 백업이후 운영체제 재설치로 대부분해결 그래도 안되는 경우 고장난부품만 제조사AS보내거나 호환되는 다른 제품으로 교체해결 일정 기간마다 써멀구리스 관리 And Bitcoin Unit "MBTC" 1000000 "kBTC" 1000 "hBTC" 100 "deBTC" 10 "BTC" 1 "dBTC" 0.1 "cBTC" 0.01 "mBTC" 0.001 "uBTC" 0.000001 "satoshi" 0.00000001
Shouldn't the AIO tubes be on top?
It is possible to install the tubes in an upward direction, but it's difficult to maintain the aesthetics.
Therefore, I decided to position the tubes at the bottom, although I don't like this setup.
I think there's a reason why most TH-camrs build this case in a similar way.
It's a sealed pump so it doesn't matter.
As long as the radiator is higher than the pump it's a non issue.
Hahahaha
After a lot of research, the general rule is that -so long as about 20% of the radiator is above the highest point of the pump, it'll run smoothly and at optimal conditions-. Tubes being at the bottom is actually ideal compared to them being at the top in the same vertical orientation. Them being at the top will cause burbling/ water noise, even with the pump below that. The opposite side of the tubes on most radiators has a dedicated reservoir where they design it with that it mind, for the air to get to that point and be trapped.
As always you are creating not a simple PC but a piece of art! Congrats with a 10K milestone!
Oh, thanks man!
I'm so jealous of the 9800x3d. The clean build is top-notch!
Oh, thank you so much!
The build looks really clean. Well done bro!
Oh, thank you so much!
I really appreciate your support👍
bro, I had to like, you did what I was going to do if I got this case. nice
Cheers mate!!
nice one. amd for the win
Guys, the AIO orientation here is perfectly fine. It's in the second best position it can be, with a top mounted radiator being the best position. Here, any air in the system gets trapped at the top of the rad... you will lose some heat dissipation efficiency, but this won't affect the pump because the liquid doesn't have to content with the trapped air. Reversing the tube orientation and putting them at the top of the rad will create the potential of trapping air where the tube enters the rad. It won't kill the pump, but it does have to work a little bit harder as a result of having to push the liquid through a smaller opening created as a result of the trapped air, and thus potentially lower the lifespan of your pump.
Edit: And if you don't believe me, both Gamer's Nexus and JayzTwoCents have spoken about this very topic at length.
Thank you so much for the information and summary.👍👍
Bit weird to have the AIO in that configuration, doesnt gravity effect the water being pumped
It does this AIO that is installed the wrong way
I think if you get the thermalright am5 plate for the cpu, you'll probably get some better cooler spread on that cpu. Seems alittle high than what it's suppose to be on those loads.
Thanks man!
07:05 If the 9800X3D stays under 80°C in Cinebench R23 without undervolting, it's an excellent result.
Nice build 👍
I like the comment of the GPU test: tested in horizontal position :) because in the final position, graphic cards don't like the vertical mode and it decrease a lot the cooling possibilities. I needed to use a waterblock to not be throttling
영상 분위기 좋습다 리안리 팬하고 라데온 레퍼글카 led하고 잘어울리네요 ㅎㅎ 잘봤어여❤
의도된 것은 아니지만 LED 느낌이 비슷한 것 같네요!
감사합니다 성철님!
What the sense to suck hot air from radiator, inside the case?
Intake is more effective than exhaust for CPU cooling. While it may increase the internal temperature of the PC case, this can be compensated by using bottom-mounted fans.
Can i get the GIF or file for the LCD screen background please ?:)
I download them from this link: giphy.com/explore/download
Been reading that GPUs in that orientation tends to run about 20° C hotter than typical orientation. Any truth to that?
Not all GPUs, but it’s true for vapor chamber types. Regular GPUs are fine.
Hey what cpu gpu combo is best for Fortnite right now medium/high end 240+ fps constant
rx 7900 xtx amd ryzen 7800 x3d good
Weird orientation but still gorgeous.
Nice but i can never do 2 sticks of ram.
RAZEN 7 9800x3D (AMD AM5) CPU에 CPU 쿨러와 써멀구리스 추천해봅니다 (개인적인 선호부품 기재)
(컴퓨터 하드웨어 선택 이전에 모든 부품들 호환성확인 및 실제 작동시 문제가 있는지 없는지 등등 충분한 공부와 자료수집은 무척 중요한 절차)
01 CPU (1개 선택하는 부품)
RAZEN 7 9800X3D (AMD AM5)
02 써멀구리스 (1개 선택하는 부품)
ARCTIC MX4 추천
03 CPU 쿨러 (1개 선택하는부품) (개인적으로 선호해서 추천기재한 3종류 제품중 1개선택추천)
(공냉(AIR COOLER) CPU Cooler중에서 대장급제품들(2024년도 기준)이므로 수냉쿨러(Water Cooler)와는 다르게 누수우려 없으면서 9800X3D에 사용해도 쿨링성능이 충분한것이 장점)
3RSYS RC1900 CPU쿨러(AMD AM5 소켓지원 모델) / 또는
PCCOOLER CPS RZ620 화이트 CPU쿨러 (AMD AM5 소켓지원 모델) / 또는
PCCOOLER CPS RZ 820 (AMD AM5 소켓지원 모델) 3종류중에 1개 선택 추천
(부품스펙호환성 기재이외에도 실제조립시 다른부품들(램방열판,메인보드,그래픽카드,케이스 등등) 과의 공간간섭이 있는지 없는지 구매전에 확인필수)
(무척 중요한 확인 절차)
컴퓨터 TIP 사용하다 문제생긴경우 데스크탑 저장장치에있는 자료 백업이후 운영체제 재설치로 대부분해결 그래도 안되는 경우 고장난부품만 제조사AS보내거나 호환되는 다른 제품으로 교체해결
일정 기간마다 써멀구리스 관리
And
Bitcoin Unit
"MBTC" 1000000
"kBTC" 1000
"hBTC" 100
"deBTC" 10
"BTC" 1
"dBTC" 0.1
"cBTC" 0.01
"mBTC" 0.001
"uBTC" 0.000001
"satoshi" 0.00000001
How net worth are you? :O
👀
크아아악 그래픽 카드를 위로 달면 냉매가 밑에 고인다던디...!
하지만 영상은 잘보았습니다 좋아요도 물론 눌러놨어요
오호 감사합니다!
gamer nexus does not approve the aio set-up
Gute Arbeit mit Amd und Lian Li. Ich persöhnlich bleib bei AMD und Asus und Lian Li gibt für mich nichts anderes
Vielen Dank! AMD ist wirklich gut!
Pc snap préstame una feria para construir mi pc
Second
👍👍
Airflow is terrible, AIO installed wrong 🤡
price?
Please read descriptions "
The total cost, excluding the graphics card, is approximately 1580 USD.
"
it's good when they send everything for free, you can do all sorts of crap)