I need a single or dual mount for 27" HP monitors. The mount needs to be able articulate "below" the mount height. That is, the center of the VESA mounting needs to be below the "desk level". This is for a desk workstation that is already 16" above desk height, and takes up the "back part" of the desk. The monitors would be below the mounting level most times, but could be "raised" above desk height to access equipment. I don't see dimensional drawing that show me how far, if at all, your products can accommodate my needs. I'd be able to drill into the mounting "desk" to extend the arm to the proper location to maximize the "stretch" of the arms.
+b0neme Our tech support says Sorry, We currently do not have a solution for the description provided. Our mounts will not allow the monitor to go below the mounting base of the mount.
+b0neme Our product manager says "The best option we would have is the K1D120SXRH, which has a nominal center-of-monitor height of 3.8” when at its lowest position. This doesn’t meet what they are looking for, as the center of the VESA pattern would still be above the desk level, but it gets them closer than anything else on the market that I’m aware of." Product Page: www.milestone.com/products/chief/mounts/monitor/desk_mounts/k1d/k1d120sxrh Tech Drawing: www.milestone.com/~/media/Files/Chief/Technical%20Drawings/K1D120XRH-T.pdf
It's gorgeous but I'd like to see a demo of this being used with a Cintiq 27QHD display tablet. It's important that the work surface doesn't move while working.
The Kontour K1 arm is designed to be highly stable for touch-enabled displays like this Wacom product. However, we sadly have no means of demoing it with that display. Will this be used in combination with another non-touch display, requiring a Dual Monitor Arm? If only mounting the Wacom tablet, I would recommend our K1C120SXRH reduced-height product, which allows the display to be brought to desk level for optimal ergonomics. If mounting both the Wacom tablet and another display, I would recommend our K1C220SXRH reduced-height dual arm product.
I've been looking for a monitor mount setup for one Asus ROG PG348Q 34" monitor and one BenQ GL2760H 27" monitor that I use for work. I'm very interested in your Kontour mounts, which one would you recommend?
Andrea, thanks for asking. We're working on an answer with our product manager and product application engineer to make sure we get the best recommendation for you. Just wanted you to know we're on the case!
They recommend the K1D220. The Max width screen allowed on the K1D220 is 34.5 inches, and the Asus is only 32.6 inches wide. This along with the narrower 27 inch other screen will be fine. The link here is the black one, but there are silver and white options as well. www.milestone.com/products/chief/mounts/monitor/desk_mounts/k1d/k1d220b
+Josue Martins (Jay) Our tech support says "Per PCT the S23C350H doesn't have a physically mounting pattern." Without a mounting pattern, Kontour mounts cannot be used.
Thanks for getting in touch. For the fastest service on this, we'll need some real-time interaction. Please call our customer support at 866-977-3901 or use the online chat function at www.milestone.com.
Guys You need to look into a professional 3 monitor gaming setup cause there is a great demand for it out there. If you get it Nvidia Approved for 3D Surround with 4th Monitor above then you get yourself a winner !!!!
Philip, I talked to the display mount product manager. He said, "Thanks for the recommendation! A Triple Display option is certainly something we’re looking into. We’ll definitely look into the NVIDIA 3D Surround further, as well."
I would want this to easily and quick switch from sitting to standing quickly. Do you have anything that would carry the keyboard and mouse with you as you move the monitors up and down. I particularly like the Chief Kontour Series K2C22HB. I am at the age (going blind. lol) now that I really like the option of being able to move the monitors forward/backwards as well as up and down. But without bring the keyboard and mouse along with them. It would be useless.
Thanks for contacting us. We don’t currently have a complimentary Keyboard & Mouse solution to make a full Sit-Stand station, but our product manager says there are a number of products on the market that work with the arms to create a solution. Happy hunting!
I'm thinking about the K1 for a Dell U3415W and an Asus ROG SWIFT PG278Q. Would they fit next to each other? Would I be able to move them so that they stack instead if I wanted that? You know, on the fly basically. I use my computer both for work and for gaming, hence the ROG SWIFT, and I want to have them stacked when I play and side by side when I work. Thoughts?
Thanks for asking! Our product manager says "No, the arm reach on the standard K1D220 or K1C220 Dual Monitor Arms isn’t long enough for a 34” + 27” monitors side-by-side. They would work 1-over-1 just fine; just not side-by-side. He would be best off buying 2x K1D120 single arms, and positioning them on the desk so that he can do this." Here's a link to that mount www.milestone.com/products/chief/mounts/monitor/desk_mounts/k1d/k1d120b
+MuayThaiBora Thanks for asking. Our tech support team needs to know the complete model number of the Dell. You can contact them directly at techsupport@milestone.com for a faster response. Thanks!
Shady E Yes, Chief has a few different options that enable this configuration. The articulation range of the K1C220S arms allows for the monitors to be positioned one-over-one in a fully articulating option, and provides you with the flexibility to move side-by-side if you like. Alternatively, the K3G120S provides a more basic one-over-one stacked mount. Check out these models on www.milestone.com.
K2C220 would be good. However, you will need to procure a transfer kit from BenQ according to our notes. We do have an EMEA headquarters in the Netherlands. Learn more at milestone.com. Thanks!
Unfortunately, both BenQ and Amazon are currently out of stock at the moment. www.benqdirect.com/xr3501-vesa-mount-adapter-plate.html www.amazon.com/BenQ-XR3501-100x100-Millimeter-Transfer-5J-LE710-001/dp/B01CCHKXPA
+Chief I like how the K1d230s has more extension. But it peaks at 10lbs max. is the something that has this kind of extension but can hold more weight? 10lbs is kind of under weight for 27".
Which 27” monitor are you planning to use? For instance, the Dell U2715H 27” monitor is 10.0 lbs. without the stand, and will work great. If you have specific monitors already, please let me know and I'll ask the product manager.
Yeah, I've got 2 of them, one for a PG348Q and the other for a PG278Q. Unfortunately, both displays tend to wobble quite a bit if I bump my desk though.
Yeah, the Thunderbolt monitors are tough because they’re so heavy. Sadly we don’t have a solution that works for three at once. The KTP325S is very close, but the Thunderbolt monitors are just slightly too wide.
Need a bit more info from you - What type of mounting arm? Desk? Wall? Height adjust or not height adjust? What is the model number? (8 digit alpha-numeric model number which typically starts with “M”).
I need one for two Apple Thunderbolts aswell, 3 isn't possible because I have an iMac 27" 5k and you can't remove the stand.. So I need wall mounts that can hold the Thunderbolt 27" displays with stock Apple vesa mount. Left and right, my iMac is in the middle.
Few questions for you: What type of mounting arm? Desk? Wall? Height adjust or not height adjust? What is the model number? (8 digit alpha-numeric model number which typically starts with “M”). Also - this is dependent if Apple offers a VESA adapter since there are not mounting holes on the back.
Thanks for the response. I am exploring different options to see what is available, either a desk mount or a wall mount, height adjustment would be preferred if it is a desk mount, not sure if thats possible with a wall mount. i am looking for one for the newer, late 2012 to current model 27" imac, the ones with the really thin display. i know the base cannot be removed, on those and they do not come with a vesa adapter, unless you order a model that specifically does not come with a base. so do you have options for the imacs that do not have the vesa option? or only for the imacs that have the mount option. asking because i am looking to either get a used imac that has the base, or order a new one that does not have a base that i can attach to a arm, which is why im trying to see what type of mounts are available before i purchase the imac. also if there is an option for 2 screen setup with these mounts. thanks
Chief, did you even read my question properly? I am asking you what products do you have available for the new imac? The new imac you can purchase comes in 2 configurations. The first is the standard option that has the base attached. This one does not have the option of removing the base but I have seen that some users add a vesa mount on their by drilling one and adding it themselves. The second option from apple is that you can order a imac without a base that can be mounted to an arm. So im asking what products do you have for either one of these configurations. I didnt think it was a really complicated question. I looked on your website and it doesnt specify which products are available for the newer model imacs. Im looking to purchase some products for my business so I want to know what you have available so I can buy the imacs accordingly. Would appreciate if you would be more diligent in reading the question more carefully and help me out with which product is best for the imacs. Thanks.
We understood the questions, let’s break it down for you. For Apple products our mount solutions only work if there is an Apple VESA adapter used. If there isn’t an Apple VESA adapter available, we unfortunately have no solutions. We do not recommend drilling to make our mounts work like some solutions out there. discussions.apple.com/thread/5088978?language=en · Old iMac 27 inch - Use the Apple MD179ZM/A VESA mount adapter kit, only available from Apple (disassembly of the screen/stand is required) www.apple.com/shop/product/MD179ZM/A/vesa-mount-adapter-kit-for-imac-andled-cinemaor-applethunderbolt-display · New iMac 27 inch purchased with the stand o No Apple VESA adapter available, No Chief mount solutions · New iMac 27 inch purchased with the ‘Built-in’ VESA mount adapter from the factory www.apple.com/shop/buy-mac/imac-vesa o Any Chief mount will work as long as the mount can handle the weight of the iMac (~21 lbs), fits the 100 x 100 VESA pattern of the Apple adapter, and the length and width of the iMac fits the parameters of the mount, say if you were to have a two screen solution for example.
Primary differences are: Best in class 5 to 25 lb. weight capacity range across full dynamic height range Patented Centris Extreme Tilt provides true fingertip monitor positioning Monitor Quick-Connect Interface for easy installation Ships fully assembled for fast & easy installation
Just one Asus PG348Q.The main reason why i want it is to rise it up a little bit so i do not have to look down with my eyes in order to see the center of the screen ( my monitor is a little bit low)
You'll want to get on the site at www.milestone.com and use the chat function for assistance in the next steps on choosing a mount and where to find them in Spain. Your question helped us find that the mountfinder needed to be updated to include monitor arms for that model. Thanks!
VDJ FLEX Thanks for asking. It can be a bit complicated. If you are in the AV industry and want to become a Chief dealer, then go to www.milestone.com/support/education_resources/become_a_milestone_dealer. If you are just looking for a specific model - you can look around on the site here, www.milestone.com/products/chief/mounts/monitor, pick a model, and search for a reseller. For example, if you google K3F310B, you will find several options for direct purchase.
![[Live สด] การออกรางวัลสลากกินแบ่งรัฐบาล งวดวันที่ 16 พฤศจิกายน 2567](http://i.ytimg.com/vi/wPd7VFfWHIA/mqdefault.jpg)
I need a single or dual mount for 27" HP monitors. The mount needs to be able articulate "below" the mount height. That is, the center of the VESA mounting needs to be below the "desk level". This is for a desk workstation that is already 16" above desk height, and takes up the "back part" of the desk. The monitors would be below the mounting level most times, but could be "raised" above desk height to access equipment.
I don't see dimensional drawing that show me how far, if at all, your products can accommodate my needs.
I'd be able to drill into the mounting "desk" to extend the arm to the proper location to maximize the "stretch" of the arms.
+b0neme Our tech support says Sorry, We currently do not have a solution for the description provided.
Our mounts will not allow the monitor to go below the mounting base of the mount.
+b0neme Our product manager says "The best option we would have is the K1D120SXRH, which has a nominal center-of-monitor height of 3.8” when at its lowest position. This doesn’t meet what they are looking for, as the center of the VESA pattern would still be above the desk level, but it gets them closer than anything else on the market that I’m aware of."
Product Page: www.milestone.com/products/chief/mounts/monitor/desk_mounts/k1d/k1d120sxrh
Tech Drawing: www.milestone.com/~/media/Files/Chief/Technical%20Drawings/K1D120XRH-T.pdf
It's gorgeous but I'd like to see a demo of this being used with a Cintiq 27QHD display tablet. It's important that the work surface doesn't move while working.
The Kontour K1 arm is designed to be highly stable for touch-enabled displays like this Wacom product. However, we sadly have no means of demoing it with that display. Will this be used in combination with another non-touch display, requiring a Dual Monitor Arm? If only mounting the Wacom tablet, I would recommend our K1C120SXRH reduced-height product, which allows the display to be brought to desk level for optimal ergonomics. If mounting both the Wacom tablet and another display, I would recommend our K1C220SXRH reduced-height dual arm product.
My secondary display is mounted on the wall behind the drawing surface, so it isn't an issue.
I've been looking for a monitor mount setup for one Asus ROG PG348Q 34" monitor and one BenQ GL2760H 27" monitor that I use for work. I'm very interested in your Kontour mounts, which one would you recommend?
Andrea, thanks for asking. We're working on an answer with our product manager and product application engineer to make sure we get the best recommendation for you. Just wanted you to know we're on the case!
They recommend the K1D220. The Max width screen allowed on the K1D220 is 34.5 inches, and the Asus is only 32.6 inches wide. This along with the narrower 27 inch other screen will be fine. The link here is the black one, but there are silver and white options as well. www.milestone.com/products/chief/mounts/monitor/desk_mounts/k1d/k1d220b
my Samsung S23C350H 23-Inch Screen LED-Lit Monitor doesnt square entrace to attach the stand.. what do I do?
+Josue Martins (Jay) Our tech support says "Per PCT the S23C350H doesn't have a physically mounting pattern." Without a mounting pattern, Kontour mounts cannot be used.
I really like your product, I'm strongly cosidering a purchase!!!
Help! My north bayou doesn't tilt down, it springs back up. I tried to adjust the - and +, it doesn't work.
Thanks for getting in touch. For the fastest service on this, we'll need some real-time interaction. Please call our customer support at 866-977-3901 or use the online chat function at www.milestone.com.
What is/are the product number(s) for the dual monitor, dynamic height adjustable setup that is shown at 3:24?
Just got mine, Awesome!!!
hello and sorry for the late qustion , do u know how it cost now ?
Guys
You need to look into a professional 3 monitor gaming setup cause there is a great demand for it out there. If you get it Nvidia Approved for 3D Surround with 4th Monitor above then you get yourself a winner !!!!
Philip, I talked to the display mount product manager. He said, "Thanks for the recommendation! A Triple Display option is certainly something we’re looking into. We’ll definitely look into the NVIDIA 3D Surround further, as well."
I would want this to easily and quick switch from sitting to standing quickly. Do you have anything that would carry the keyboard and mouse with you as you move the monitors up and down. I particularly like the Chief Kontour Series K2C22HB. I am at the age (going blind. lol) now that I really like the option of being able to move the monitors forward/backwards as well as up and down. But without bring the keyboard and mouse along with them. It would be useless.
Thanks for contacting us. We don’t currently have a complimentary Keyboard & Mouse solution to make a full Sit-Stand station, but our product manager says there are a number of products on the market that work with the arms to create a solution. Happy hunting!
Chief Does it carry two 32 inch monitors and what is the solution with keyboard & mouse?
Thanks
How do I buy this in the uk? Are these available to the general public
I'm thinking about the K1 for a Dell U3415W and an Asus ROG SWIFT PG278Q. Would they fit next to each other? Would I be able to move them so that they stack instead if I wanted that? You know, on the fly basically.
I use my computer both for work and for gaming, hence the ROG SWIFT, and I want to have them stacked when I play and side by side when I work. Thoughts?
Thanks for asking! Our product manager says "No, the arm reach on the standard K1D220 or K1C220 Dual Monitor Arms isn’t long enough for a 34” + 27” monitors side-by-side. They would work 1-over-1 just fine; just not side-by-side. He would be best off buying 2x K1D120 single arms, and positioning them on the desk so that he can do this." Here's a link to that mount www.milestone.com/products/chief/mounts/monitor/desk_mounts/k1d/k1d120b
Thanks for the reply. :)
Can this mount take the weight of the dell ultra sharpe 30 inch
+MuayThaiBora Thanks for asking. Our tech support team needs to know the complete model number of the Dell. You can contact them directly at techsupport@milestone.com for a faster response. Thanks!
Yes its a Dell 3008wfp
+MuayThaiBora K1C and K1D monitor mounts show compatible on MountFinder. Should be good to go.
Are you able to stack monitors on top of each other with this mount? my desk space is limited.
Shady E
Yes, Chief has a few different options that enable this configuration. The articulation range of the K1C220S arms allows for the monitors to be positioned one-over-one in a fully articulating option, and provides you with the flexibility to move side-by-side if you like. Alternatively, the K3G120S provides a more basic one-over-one stacked mount. Check out these models on www.milestone.com.
Очень здорово и бодро! Буду заказывать одну из моделей.
I've got 2 monitors. A BenQ XR3501 and an AOC G2460VQ6, what kind do you recommend for this? Btw do you diliver to the Netherlands?
K2C220 would be good. However, you will need to procure a transfer kit from BenQ according to our notes. We do have an EMEA headquarters in the Netherlands. Learn more at milestone.com. Thanks!
Unfortunately, both BenQ and Amazon are currently out of stock at the moment. www.benqdirect.com/xr3501-vesa-mount-adapter-plate.html
www.amazon.com/BenQ-XR3501-100x100-Millimeter-Transfer-5J-LE710-001/dp/B01CCHKXPA
Can the K1 dual monitor stand handle two 27-inch monitors and not lose positioning ability?
Yes, it can handle up to 2x 27” monitors. However, for additional range of motion, we recommend the K1D230S.
+Chief I like how the K1d230s has more extension. But it peaks at 10lbs max. is the something that has this kind of extension but can hold more weight? 10lbs is kind of under weight for 27".
Which 27” monitor are you planning to use? For instance, the Dell U2715H 27” monitor is 10.0 lbs. without the stand, and will work great. If you have specific monitors already, please let me know and I'll ask the product manager.
@Chief - Will the K1d120 handle the Asus ROG Swift PG348Q?
Yes, per Asus’s website it supports 100x100mm VESA, and comes in just under 25 lbs.
RedMenace perfect I had this same question, if you purchased it guess is it holding up
Yeah, I've got 2 of them, one for a PG348Q and the other for a PG278Q. Unfortunately, both displays tend to wobble quite a bit if I bump my desk though.
I need a triple monitor stand for three Apple Thunderbolt 27" displays, which one will be perfect? Thanks.
Yeah, the Thunderbolt monitors are tough because they’re so heavy. Sadly we don’t have a solution that works for three at once. The KTP325S is very close, but the Thunderbolt monitors are just slightly too wide.
Do you have a mounting arm for 2 27 Apple Thunderbolt displays ?
Need a bit more info from you - What type of mounting arm? Desk? Wall? Height adjust or not height adjust? What is the model number? (8 digit alpha-numeric model number which typically starts with “M”).
I need one for two Apple Thunderbolts aswell, 3 isn't possible because I have an iMac 27" 5k and you can't remove the stand.. So I need wall mounts that can hold the Thunderbolt 27" displays with stock Apple vesa mount. Left and right, my iMac is in the middle.
Looking for a Desk mount for 2 27" Apple Thunderbolt Displays. Model # MC914LL/B. I would prefer height adjust.
do you have any mounts for the new 27" imac, single or double monitor arm?
Few questions for you: What type of mounting arm? Desk? Wall? Height adjust or not height adjust? What is the model number? (8 digit alpha-numeric model number which typically starts with “M”). Also - this is dependent if Apple offers a VESA adapter since there are not mounting holes on the back.
Thanks for the response. I am exploring different options to see what is available, either a desk mount or a wall mount, height adjustment would be preferred if it is a desk mount, not sure if thats possible with a wall mount. i am looking for one for the newer, late 2012 to current model 27" imac, the ones with the really thin display. i know the base cannot be removed, on those and they do not come with a vesa adapter, unless you order a model that specifically does not come with a base. so do you have options for the imacs that do not have the vesa option? or only for the imacs that have the mount option. asking because i am looking to either get a used imac that has the base, or order a new one that does not have a base that i can attach to a arm, which is why im trying to see what type of mounts are available before i purchase the imac. also if there is an option for 2 screen setup with these mounts. thanks
If the Apple VESA adapter isn’t available for his model, we unfortunately have no solutions.
Chief, did you even read my question properly? I am asking you what products do you have available for the new imac? The new imac you can purchase comes in 2 configurations. The first is the standard option that has the base attached. This one does not have the option of removing the base but I have seen that some users add a vesa mount on their by drilling one and adding it themselves. The second option from apple is that you can order a imac without a base that can be mounted to an arm. So im asking what products do you have for either one of these configurations. I didnt think it was a really complicated question. I looked on your website and it doesnt specify which products are available for the newer model imacs. Im looking to purchase some products for my business so I want to know what you have available so I can buy the imacs accordingly. Would appreciate if you would be more diligent in reading the question more carefully and help me out with which product is best for the imacs. Thanks.
We understood the questions, let’s break it down for you. For Apple products our mount solutions only work if there is an Apple VESA adapter used. If there isn’t an Apple VESA adapter available, we unfortunately have no solutions. We do not recommend drilling to make our mounts work like some solutions out there. discussions.apple.com/thread/5088978?language=en
· Old iMac 27 inch - Use the Apple MD179ZM/A VESA mount adapter kit, only available from Apple (disassembly of the screen/stand is required) www.apple.com/shop/product/MD179ZM/A/vesa-mount-adapter-kit-for-imac-andled-cinemaor-applethunderbolt-display
· New iMac 27 inch purchased with the stand
o No Apple VESA adapter available, No Chief mount solutions
· New iMac 27 inch purchased with the ‘Built-in’ VESA mount adapter from the factory www.apple.com/shop/buy-mac/imac-vesa
o Any Chief mount will work as long as the mount can handle the weight of the iMac (~21 lbs), fits the 100 x 100 VESA pattern of the Apple adapter, and the length and width of the iMac fits the parameters of the mount, say if you were to have a two screen solution for example.
Desk Mounts:
www.milestone.com/products/chief/mounts/monitor/desk_mounts
Wall Mounts:
www.milestone.com/products/chief/mounts/monitor/wall
www.milestone.com/products/chief/mounts/display/wall-fixed/fsr
www.milestone.com/products/chief/mounts/display/wall-tilting/ftr
Hope this helps
how does this compare to the MXV?
Primary differences are:
Best in class 5 to 25 lb. weight capacity range across full dynamic height range
Patented Centris Extreme Tilt provides true fingertip monitor positioning
Monitor Quick-Connect Interface for easy installation
Ships fully assembled for fast & easy installation
Which one would you recommmend me for the asus PG348Q? Also, do you ship to Spain?
Many of the K1 & K2 mounts will work, we’ll just need to know what you are trying to do -- Number of monitors, height adjust or not, multiple arms?
Just one Asus PG348Q.The main reason why i want it is to rise it up a little bit so i do not have to look down with my eyes in order to see the center of the screen ( my monitor is a little bit low)
You'll want to get on the site at www.milestone.com and use the chat function for assistance in the next steps on choosing a mount and where to find them in Spain. Your question helped us find that the mountfinder needed to be updated to include monitor arms for that model. Thanks!
pls how do i get one of this?
VDJ FLEX Thanks for asking. It can be a bit complicated. If you are in the AV industry and want to become a Chief dealer, then go to www.milestone.com/support/education_resources/become_a_milestone_dealer. If you are just looking for a specific model - you can look around on the site here, www.milestone.com/products/chief/mounts/monitor, pick a model, and search for a reseller. For example, if you google K3F310B, you will find several options for direct purchase.