Bhai ye sab saman kaha se liya hai aapne मैं ज्यादा पढ़ा लिखा तो नहीं हूं लेकिन अगर आप ऐसे ही मदद करते रहेंगे तो मै अपने बच्चे के लिए ये जरूर कार बनाउंगा
I have an error while uploading code in Arduino uno. Failed uploading: uploading error: exit status 1avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x30 avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x20
Can you tell me how to change the settings. Actually our project also having same problem. Left right direction is wrong in ours project. So can you help asap?😢
I did, everything works, but after a little bit of work, it disconnects, the Bluetooth cuts out and it either goes forward or spins around by itself, it keeps going like this.
sir can you provide me the arduino code aapne jo link provide kiya hai vo exist hi nahi karta hai to aap please mujhe arduino ka code provide kar dijiye aapki videa dekh ke mene saare electronic components purchase kar diye 😨😨😨
I have done everything but my bluethooth is not showing in available devices to connect i also tried changing bluethooth but the problem is same what can be the problem? I have used L293D motor sheild for my project. Light is coming in audino and motor sheild. But bluethooth light is not blinking for both the modules. Please guide... I have programmed it as per requirements and uploaded it.
You need to unplug the Bluetooth module from Rx and TX pin while uploading the code in Arduino... If the Bluetooth module light is not blinking that means you are connecting vcc and gnd pin wrong in Arduino
@@amarnadhtechknowlogic7670 L293d motor driver code would be different or L298n motor driver cord is different L293d motor driver Adafruit Motor Shield Library download karna hoga
Hii, your code link is not correct, please give code link, i request you, i did everything like you did in video, but code is not there when i checked, please give code
code drive link not worked,,,,,,,,,,,can you give me the code I am a student I want to learn ,,,,,,,but I have error on my code please share the code link sir ,,,,,,,Thank You
Uncle code nahi chal Raha waise video to apni acchi banai hai apne but ap please code co refresh karke dalenge
Contact me on email for purchase the code
I'v wantet a horn on my car for 10 months and i find the perfect video!!
Thanks bro
@Felix Benedetti
What code have you used
Bohut bariya ❤️🔥. I shall make this wonderful project like ur
Thanks bro
Good job
But I preferred to be in English version
Thanks bro
Well Explained Video, Can u add Ultrasonic sensor to it with updated code and wiring diagram
Thanks bro for support
Update the code or use it for ultrasonic Sensor
Wow awesome project bro
Thanks bro for support
Bro can i use three 2200 mah batteries in it
And how to connect them in series or parallel?
How can I will buy all this material of car how and where
Search online 4wd robot car Chassis kit
Thanku for the code❤
Welcome bro
Bro kindly share the code
Contact me on email
Hey the arduino code does not exist anymore... Can you resend it?
Ye program Arduino nano may kam karega l293d motor driver ic ke sath??
Plz reply my question
Yes brother donon same arduino hai
@@UNLIKEIDEAS Sir Do I need to change any code for L293D
@@amarnadhtechknowlogic7670
Brother L293d or L298n ine donon ke liye aapko alag alag code use karna hoga.
Please send code or give link
Contact me on email
Bhai ye sab saman kaha se liya hai aapne मैं ज्यादा पढ़ा लिखा तो नहीं हूं लेकिन अगर आप ऐसे ही मदद करते रहेंगे तो मै अपने बच्चे के लिए ये जरूर कार बनाउंगा
Online amazon
Can we connect a dc motor insted of light for another purpose?
Yes bro
Bro thank you bro for sent the code in gmail
Welcome bro 🙏
Wow so nice 🔥🔥🔥🔥🔥
Sir i have different motor drive shield L293D.....but i want to use car via blutooth and operate the lights with blutooth tooo how can i? ...pls help
No it's only work with L298 Motor Driver
Bro needed the code. Sent you a email regarding this. Please share the code. Thank you.
Can I use l293d motor shield for this code?
Sir isme ham or koisa bhi Bluetooth module use kar sakte hain
No use hc05 bluetooth Module
Si l298 driver board use kr sakte hai?
Yes bro use it
Hi, Im using VNH2SP30 Monster Motor shield (dual Channel) can i use same code with this sheild, can you help me for pin no. & code setting
No this code is not working with your VNH2SP30 motor driver
Bhai sare products kaha se purchase kare bro 🤯🤯 plz bhai bhatao 😍❤❤❤❤
Go online shoping app electronics components
I have an error while uploading code in Arduino uno.
Failed uploading: uploading error: exit status 1avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x30
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x20
Ok contact me
Contact number ?
Contract number
please help me as soon as possible becaue i have prepared this model please in dont have code for this model
Contact me on email
Please send the link for buying these all products in one kit
Search online amazon or local electronics shop
Can you tell me how to change the settings. Actually our project also having same problem. Left right direction is wrong in ours project. So can you help asap?😢
Contact me on email
Bhai code kaha ha open hi nahi ho raha
Contact me on email
Bro i subscribed you keep going do the writting machine
Coming soon
Bro i love ur videos
Thanks bro
very nice video, but the link for the arduino code doesn't work. Can you please fix it.
Contact me on email
how to customize the forward and backward button setting?
Please check TH-cam video how to customise Bluetooth rc controller
I did, everything works, but after a little bit of work, it disconnects, the Bluetooth cuts out and it either goes forward or spins around by itself, it keeps going like this.
Use arduino code for bluetooth car
@@UNLIKEIDEAS I am using your code, you sent it to me as an e-mail.
sir can you provide me the arduino code
aapne jo link provide kiya hai vo exist hi nahi karta hai
to aap please mujhe arduino ka code provide kar dijiye
aapki videa dekh ke mene saare electronic components purchase kar diye
😨😨😨
Contact me on WhatsApp number see Channel about section
Sir code aplode करणेकॅ की लिंक इस number पे भेजिये please sir
Contact me on email
Kya hum arduino uno smd version use kar sakte he ?
Yes brother
jisme aapne lights connect ki ha
Aap camera bale car kab banngya
I have done everything but my bluethooth is not showing in available devices to connect i also tried changing bluethooth but the problem is same what can be the problem? I have used L293D motor sheild for my project. Light is coming in audino and motor sheild. But bluethooth light is not blinking for both the modules. Please guide... I have programmed it as per requirements and uploaded it.
It's easy to make upload the code and run it
How can we solve bluethooth problem
You need to unplug the Bluetooth module from Rx and TX pin while uploading the code in Arduino... If the Bluetooth module light is not blinking that means you are connecting vcc and gnd pin wrong in Arduino
Auridino gadget's Link kindha discrptions lo pettu bro next video lo
Search online amazon
I HAVE SENT THE MAIL TO YOU CAN YOU PLS SEND THE CODE YOUR IS LIKE THE BEST ONE I FOUND ON INTERNET
Ok I sand u
@@UNLIKEIDEAS thanks 🙏❤️❤️!!
@@UNLIKEIDEAS Im also having the same issue
@@swarandnaik ok I sand u
Can you send me the code 🥺 @@UNLIKEIDEAS
Bro which soldering rod you used
I use 8watt, 25watt or 35watt soldering iron
You can go and watch it on my channel. I have put all the soldering iron videos on my channel.
Thanks
Bro,the motor need to use horizontal or vertical
See full video
Can you give me the code
@@annielim2446 Contact me on email
what is your email address
@@annielim2446 kumarrajesh.thakur93@gmail.com
How about good afternoon, how can I make the cart have more speed, thanks
Use 500 rpm dc motor
The code is not shown it's showing code does not exist plz send the code link again
Sar aisi car Arduino Nano se bhi banay aur jaldi se jaldi you tube par dale
Ok bro
Bro... I don't understand why the Bluetooth doesn't turn on when after turn on the switch... Is it because of the battery... Btw I use 9v battery.
Use 18650 3.7V battery to 12v for bluetooth car
Excelente projeto. were are the code and wiring diagram?
Contact me on email
I like your Bluetooth car and I want to purchase from you and how much cost send details
4500/-
Broo I want this car broo send me ur what's up number broo
Then we will talk and finalize the money
Your car directions are wrong
Contact me on WhatsApp number link in the video description
Doesn’t 4wd need 2 l298n ?? Won’t it over heat if you have 1 ?
No overheating problem for this L298n motor driver
Kya ham isme camera laga sakte hai?
Please reply to me
Yes bro
Sir ye car ka saman kitne ka he aap ne ye sab saman kha se laye ho
Online amazon
My gear motor is 100 rpm please how many speed cross much
Use high rpm bo motor like 400 to 500 hundreds
bro,,,please reply... your code url is not right please check and give me please...
Contact me on email see Channel about section
Li ion battery kaha se lekar ae bhai
Local electronics shop or online amazon
sir aapne jo jumping wire use kri thi ground pin mein male to female...vo wali wire kha se milegi
Search online or local market electronics shop
Hello, the Code is not enabled, can you upload it again please, I need it for my final robotics project, I'm urgent, please. thank you
Contact me on email
@@UNLIKEIDEAS I've already done it
Can i use aurduino nano
Yes use it
Hi Bro,
Can you share the code i have sent an email to you. The link in description is not working
Hello, excellent project, I can't download the link of the code
Contact me on email
buenas. Primero buen proyecto y felicitaciones. Segundo me aparece el link del codigo caido, osea que no esta disponible. Saludos
Contact me on email
Please attach the new Arduino code in discretion that the old one was not working.
Contact me on email
Bhai mere phone me code download hone ke badh open nahi hora kya karu pls tell me
Download code viewer app
@@UNLIKEIDEAS completing error
@@knowledgebysai8358 why
exellant bro can you send me code
The Arduino Code is missing in the provided link. Need it urgently!
Contact me on email for purchase the code
@@UNLIKEIDEAS Business 😂
Bro how can connect 3 v battery to d please explain
Use 3 battery 3.7v in series connection
Total voltage 12v use it
No one is making video on l293d to attach light horn 🤒
Contact me on email
Can coad works for l293 moter driver shield
Yes bro
@@UNLIKEIDEAS SIR
Is There any changes for code for L293D
@@amarnadhtechknowlogic7670
L293d motor driver code would be different or L298n motor driver cord is different
L293d motor driver Adafruit Motor Shield Library download karna hoga
I have sent the mail to you.Can you please sent the code. Sunday is my compitition
Hello, code ki link kaam nahi kar rahi aur jo diagram hai, usme EnA or EnB ki wiring nahi hai
Please fix this
Contact me on WhatsApp number see Channel about section
Nice video bro👍👏 please can you send me the code as the link is not working i have send you an email
Contact me on email
Bro why are you not sending the code on email?
Nice vedio bro. But code is not available.Please fix it.
Contact me on email
Hii, your code link is not correct, please give code link, i request you, i did everything like you did in video, but code is not there when i checked, please give code
Contact me on email
Hello Sir. The code can't seem to be found when I opened the link on the description.
Contact me on email
Pls reply fast.....
Pls tell how to correct it
Contact me on email
bro your code is not opening
Contact me on email
Please send the code link Please send Correct link bcos the link that is in description Is not working
Contact me on WhatsApp number see Channel about section
HM 10 bluetooth module वापरला तर चालेल का?
Use Hc 05 bluetooth Module
Can I use arduino nano?
Yes bro use it
the link for the code is down, could you reupload it please?
I have sent you the arduino code in the email.
Thanks
See this video for wiring
th-cam.com/video/HmLFZ1gkE0c/w-d-xo.html
Bhai vedio bhut acha tha par is ka code nhi Mel Raha
Contact me on email
Plz is ka code send Karo na
Bro please send codes link 😢
Contact me on email
code drive link not worked,,,,,,,,,,,can you give me the code
I am a student I want to learn ,,,,,,,but I have error on my code please share the code link sir ,,,,,,,Thank You
Contact me on email
Bro can i use arduino nano instead of arduino with same connections?
Yes bro
@@UNLIKEIDEAS Thanks Bro❤️
Sir mene car ka connection Kar liya bad me code bhi upload Kar diya fir bhi car chal nahi Rahe he.
Wiring prb
Bro I contacted you by gmail about the situation of the code, can you help me please?
Ok i will send you
Directly past it in description
bro i am not able to open the code link so can u send me the code again
Contact me on WhatsApp number see Channel about section
Where shall I find proper codes as show in video
Contact me on email
Bro can we connect a 12v led instead of 8mm led
No
Why ?
Could I have any other alternate
Camera wali Kar jab bulaoge tab me sescribe karuga
Bro The code is not activated I need it..can you activate it? I have already sent you an email
Ok I will send you
I have robotic competition
Nice bro
Bro code ki link tho sahi provide karo
Jo abhi link diya ho vho tho open bhi nahi ho rahi hai
Contact me on WhatsApp number see Channel about section
Thanks for video, I want to operate this car with nrf24l01 (transmitter/reciever) with same functions. can you please help me with code?
Contact me on email
@@UNLIKEIDEAS your email id?
@@UNLIKEIDEAS bro please send me code
@@UNLIKEIDEAS bro send me code
@@a.kgamingff5842 kumarrajesh.thakur93@gmail.com
Can I use a 9V battery
Yes bro