Arduino obstacle avoiding + voice control + Bluetooth control Robot | DIY Arduino Robot
ฝัง
- เผยแพร่เมื่อ 17 พ.ค. 2021
- Hello guys, In this tutorial, we will learn how to make a multi-functional robot using the Arduino platform. That is, this includes obstacle avoiding, Bluetooth control, and voice control functions.
OK enjoy it now.
Short and sweet tutorial. Only from SriTu tech. If you think this video is good, don't forget to like and comment.
Arduino obstacle avoiding + voice control + Bluetooth control Robot | DIY Arduino Robot
• Arduino obstacle avoid...
Arduino obstacle avoiding + voice control + Bluetooth control Robot
00:32 Presentation of components
01:47 Attaching the gear motor
02:17 Attaching the Arduino board and motor driver shield
03:15 Connecting the motors
03:45 Attaching the servo motor and ultrasonic sensor
04:55 Connecting the Bluetooth module
05:40 Connecting the battery holder
06:15 Obstacle avoiding
08:50 Bluetooth control
10:27 Voice control
***Names of components.
***step by step.
***With code.
Bluetooth control remote -- bit.ly/3GWcmmD
Subscribe to more videos --- / sritutech_sritu_hobby
Website for more tutorial --- www.srituhobby.com
Android app for more tutorial --- bit.ly/3GWcmmD
( Source code and circuit diagram )
=========================================
Website -- bit.ly/3IhfCMc
Android app -- bit.ly/3GWcmmD
=========================================
Our store with the best prices
========================================
srituhobby.com/shop
========================================
Part's List (Our store -- SriTu Hobby)
==========================================
1.Arduino Uno x 1 --- bit.ly/41RMh1o
2.Gear motor x 4 --- bit.ly/40u3TQa
3.Robot wheel x 4. --- bit.ly/3N8OPEm
4.Motor Driver(L293D) x1. --- bit.ly/43Yc5Ld
5.Ultrasonic sensor x 1 --- bit.ly/3KV8o0l
6.Bluetooth module x 1 --- bit.ly/3pP6fML
7.Li-ion battery x 2. ---
8.Li-ion battery holder x 1 --bit.ly/3IdStK4
9.Jumper Wires ---- bit.ly/43V7gSR
10.Dot board x 1. ---
11.Switch x 1.---
==========================================
Parts List (Amazon)
==========================================
1.Arduino Uno x 1 --- amzn.to/35pRnrQ
2.Gear motor x 4 --- amzn.to/3ihqwlx
3.Robot wheel x 4. --- amzn.to/3bKirU4
4.Motor Driver(L293D) x1. --- amzn.to/3UcJCes
5.Ultrasonic sensor x 1 --- amzn.to/3gLCkRj
6.Bluetooth module x 1 --- amzn.to/3nZqNMw
7.Li-ion battery x 2. --- amzn.to/33iZlQO
8.Li-ion battery holder x 1. --- amzn.to/3bGX4CZ
9.Jumper Wires ---- amzn.to/2GCovCj
10.Dot board x 1. --- amzn.to/2RhSb9P
11.Switch x 1.--- amzn.to/3ihb6Oa
=========================================
( Social media links )
==========================================
Facebook-------- / srituhobby
Twitter------------- / sritu_hobby
Instagram------- / sritu_hobby
Pinterest--------- / sritu_hobby
Tiktok------------- / sritu_hobby
Reddit------------- / sritu_tech
Linkedin----------- / sritu-hobby
Snapchat-------- / srituhobby
Threads---------www.threads.net/sritu_hobby
==========================================
Thanks for watching......................
If you learned something in this video,
**Like.
**Share.
**Subscribe.
What do you think? please comment below.
#SriTu_Tech_arduino #arduino_robot #obstacle_avoiding_robot - วิทยาศาสตร์และเทคโนโลยี
👉Code and circuit diagram.
bit.ly/3IhfCMc
Hello sir How this car cannet
In your laptop which version of arduino programm 18.13 or 18.13or 22.2?
Which version is used to this code
Which version I should download aurdino
@@mvsfcreation6847 +. Sorry for mistake Im not good at speak English. Which version is used to this code
af motor only file name for download please answer
Ayoo bro this is absolutely gold. I'm assigned to do pretty much the smae project and I'm running out of time and didn't had a clue on what should i do. This gives me an overall idea on what im supposed to work on. I really appreciate this bro
Ya
Bro am unable to run the car....all connections are made...can u help me please
@@SGECAishwaryaKM it's been over a year since i done my project, so i forgot pretty much every, my advice for u is to try simple systems, to make sure ur wiring and components and codes are working, then try to combine simple systems and codes or simple functions, other than that u'll be overwhelmed and lost, start small and build on that, look for every module or sensor online to get a code or a wiring diagram as a reference,
One more thing, if ur system is a bit complicated, don't rely too much on chat Gbt, 70% of the time hr provides wrong codes, i hope this helps, good luck
I am a student and finding a way to make a project for school and I landed here. From what I saw and learned from you. there's a lot of things I can do because of your tutorials. I am now your new subscriber ,you deserve an appreciation. your projects is a work of art. thank you so much for the free tutorial. May you have more blessings to come. God bless you.
Thank you so much
Please can you copy the code here
@@sritu_hobby lease can you copy the code here I search for it in the app I didn t find it.i need it please
How much is all of these things, please leave me replay.
Components list in the description
thank you so much for this video!! ❤❤
Great I will also do the same for my project
Thank you so much my first university project and amazing ❤️
Did you make it, did it work?
Did it work?
Did it work?
Thank you so much for making this video. It was helpful a lot 🎉🥳💯
Program upload huva kya
Great work bro.I think i will make the car to my school project 🙏
good work
if you add auto stop sensors using while an object to hit, it will automatically stop it perfect.
just I think so
Hello,would it be possible to add a beeping parking function to this,e.g when there is an object at a certain distance it starts beeping and then the closer you get the faster the beeping gets
1. Arduino Uno Board
2. Ultrasonic Sensor
3. Bluetooth module
4. Motor Driver L293D
5. Servo Motor
6. Gear Motor
7. Robot wheel
8. Battery holder
9. Battery
10. Jumper wire
11. Foam Board
How much would all this cost
@@vivekviswanath2607 do you know how much its all cost
I think it might 6000
Around 3000
Nah I got this done in under 2k
Your project is very good 👍
What a good video, congrats bro. Ty so much
How do you recharge the battery?
Great work btw sir!
Congratulations, this is the first multi-command project I've seen, very creative.🇧🇷
Thank you very much!
thank you
Ig people of Brazil are very interested in robotics I see so much people of Brazil in every comment of any robot video
Can we use any other mah battery
Yah
That's great. wish you more and more success
Thank bro am a student and am going to make such as my final project it's so amazing thank u for the help
All the best
Thank you so much, I had a science fair and I did this project and my teachers are obsessed with it
Can you please provide me the source code cz link in the description box isn't working anymore
srituhobby.com
How much all the materials cost
Please tell me
You really made this ??? It worked or not ? Pls tell
What a Idea! ❤ Thanks Mate 🤝
Most welcome 😊
Thank sir it help me a lot and i got a medal in my school
It's Work ❤ Thanku Sir
Nice smart car bro.I have question. Do i need 4 different motors for the car to turn left and right or can i make it turn left and right with a single motor. Basically i mean the servo motors in the rc car which rotates the wheels
With two motor you can make it turn left and right it not necessarily u use 4 motors. 4 motors consume more battery power
bro which application are u using to control the car in bluetooth control
wahooo it's an amazing idea , i would like to realise the same project where can i get the required compenents from ?
Nice project
Materials used to make this rc robot car : -
1. Arduino Uno and its Cable
2. L293D
3. Ultrasonic Sensor
4. Servo Motor
5. HC-05 Bluetooth Module
6. Gear Motors x 4
7. Li-ion Battery x 2
8. Battery Holder
9. Connecting Wires
10. Jumper Wires Male to Female
11. Jumper Wires Female to Female
12. Switch
13. Robot Car Wheels
14. Male Berg Strip
15. Foam Board (*18x12cm)
16. Soldering Iron & Wire
17. Hot Glue Gun and Glue tubes
18. Star Screw Driver
19. Cutter
It costed me around 4.5k INR including everything gluegun & solder(high quality).etc
Budget
could you help me with this as it worked for you . I have a question about the yellow-capped component labeled "PW" on the motor shield. Additionally, I've developed a car using the same procedure and utilizing two 3.7V batteries each. However, I've encountered two problems:
1- When I unplug the USB, the car stops working.
2- The batteries seem unable to power all four motors to move the car.
Initially, the setup worked fine during testing, but these issues arose later on. Could you please provide assistance on how to address these problems?
Check : the wire connections , does all motors work
@@ahmedshalaby948
I have a doubt, to change the mode of the car do we have to code always. Or by directly starting the car.
x2
@@soyezequiel8238 ??
Sir I like this thank you 🎉🎉🎉🎉❤😂😂😂
Terimakasih banyak semoga ilmunya berkah pa guru. Salam Kami Indonesia..
Hey sir again sorry for taking your time but I want to ask we use hc-05 Bluetooth module for coding Arduino instead of usb cable do we have to make some changes?
It is just wasteful of time and you might burn the shield
Amazing bro but can I ask a question it seems to be stupid but the How can I transfer between moving with voice and bluetooth and the obstacle avoiding?
Aaieen baigan
Good tutorial for beginners
Wow that's awesome 😎 that is the best robot I ever see.
Thank you
Thank you for this video. May i ask, how do you switch from manual to automatic(voice/bluetooth control) mode and vice versa??
It cant be toggled like that. Its manual
Cost of doing this project
Hello Sir, thank you for this really amazing and insightful project, learned a lot. Which software did you use to develop the elaborate circuit diagram?
Aurdino
Wonderful 👍 in my opinion this video will be interesting and useful for everyone 🎉
thanks i am going to try ..
This is truly amazing
Thank you for the code😁😍
Your welcome
Please give the link of the code
srituhobby.com
Where is code bro please give ma
srituhobby.com
Will All the functions work together if we merge the codes. What I mean is can we run all three Codes in order to function All the three
Hey actually I to have a same doubt did u sort it out ?
Mee to same doubt
No bro it dont work at same time
@@syedkhalid5584 not working at same time
A great work I bless you for new projects
Thank you. I am making it for my school project
Question: Why should we remove rx and tx jumpers while uploading the program?
yes
Good question
Because uploading needs RX and TX pins thats why
So, if you just set in avoiding obstacle the Bluetooth and voice command will not operate. But if I want to operate it in Bluetooth and voice command simultaneously, is it possible?
Bro I have the same doubt
i have same question also
Thank u 🙏 its really amazing 🤩
Sir mene ek arduino robot banaya tha apki video dekh ke,,, obstacles avoiding and Bluetooth control ,, and voice control mene banaya toh tha lekhin mene Arduino ko computer se connect karke obstacle avoinding programe nehe kar paya aur bluetooth aur voice control bhi mereko kuch bhi knowledge nehi he program ko leke kya app mujhe help kar sakte he ki kish prakar code dalna hei kaise dalna he kish kish code ko nehi dalna chahiye aur dalna chahiye mujhe kuch nehi pata 😢 please help
Very cool project to do
💗💗💗First of all , Amazing Project and thank you for all of your hard work for provoding every resources , codes and plus the Sri Tu Hobby App is amazing with lots of good things . My doubt is can we run all three codes at same time? will voice control + bluetooth + obstacle avoiding will work at same time or it works one function at a time? Can you please help me .💗💗💗
.I will be doing that project soon.
@@sritu_hobby have you done this project yet. i want to do this but i need it to be able to run all three states at the same time
@@sritu_hobbyhave you done, if yes then can you please provide updated code link
@@sritu_hobby update?
I follow same steps but my car didn't start
Are ache se kkarega tabhi start hoga
Super sensing used to control 👍
Ultrasonic sensor
Best TH-cam channel for electronic project making ❤️❤️ thanks u sir
Your welcome
I was able to compile the code with no errors. I connected the Rx pin on the Bluetooth module to 1 and the tx pin to 0. Connected the ultrasonic sensor the same way you did yours. I am using a 4x AA battery which has 1.5volts each making it a total of 6 volts. After uploading the code, I removed the cable and put in the batteries. Only the front right tire spun. The rest weren't moving. After a while, the front right tire stopped moving as well and the back right tire started to move. This stopped shortly after. What may be the problem, please?
Please use a 9v battery.
@@sritu_hobby you have no idea how happy I am to receive a reply from you. I had just gone to the market already and I’ve just gotten the 9v battery. I hope it won’t be too much for the car. I am on a deadline and I’m so scared. Is there any platform I can privately contact you please? 🙌🏻😔 whatsapp, whatever please
@@sritu_hobby Also, I just plugged a dc cable to test it first. Only the back left tire was moving and, it was rotating backwards . Please, I really need help
@@sritu_hobby I used 9 volt battery but the wheels are getting very slow and stopping not moving at all I have used 200rpm bo motor please help
Please use a li-ion batteries
it is not upload help please😢😢
What error showing?
Bhai mera bhi ho rha hai
Bhai afm motor error aa rha hai
Apakah Ada Fruit Motor sudah terinstal? Atau colokan usb pada pc tidak bagus. Coba masukan pada usb pc yang lain.
Jo starting me */ ye hai hta do aur af motor library download kar lo..
ya realy helpfull thanks.
Bless you brother
thank you for this video
Sir can you please tell if we can use any other battery instead of the li ion battery?
Ur videos are great sir
exelent very nice😀😀
if we have L298N motor driver can use and is there is any change we have to do in code
sir can we handle this all features at same time mean in program without commenting all features?
Wow I love this and won't be selfish to introduce your channel to my colleagues
Thank you..
Your work is amazing boss i love it u are great boss
Thank you so much 😀
its very good
Great
Good 👍👍👍👍👍👍👍👍👍😊😊😊👍👍👍👍😊👍
have a question about the yellow-capped component labeled "PW" on the motor shield. Additionally, I've developed a car using the same procedure and utilizing two 3.7V batteries each. However, I've encountered two problems:
1- When I unplug the USB, the car stops working.
2- The batteries seem unable to power all four motors to move the car.
Initially, the setup worked fine during testing, but these issues arose later on. Could you please provide assistance on how to address these problems?
and what specific Batteries and how many of them I need and what volatge.Thanks In adavnce.
love from 🇮🇳
Good evening, is there a problem if you use an HC-06? I need a quick answer please.
Wow it's work at all 💖
I have try it.. 😊😊
Great 👍
Which Aurdino had you used ?
Aurdino uno or Aurdino uno rev3
Nice
Thanks
sir bluetooth controlling app was changed or another one??
Thanks bro for this video its more useful today I got second price for this 🎉🎉🎉 thanks bro❤
bro you got 2nd price making this. What did the person built who got first?
and what are you in school high school college or university?
@@broken_56 university bro
It's helpful
will obstacle detection and bluetooh control...work simultaneously?
Very good information
Thanks
Sir can we apply all the functions like voice, Bluetooth and obstacle avoiding in one . Not like one by one . Please reply
Mind blowing project bro but my doubt is to recharge the battery i need to take it out or I can do it in ite Arduino board
Sir is the app u used for the bluetooth control compulsory or are there any alternative apps bc that app isnt there in our play store
Good bro ❤❤❤❤❤❤❤❤❤😊😊😊😊😊😊
Can we apply all 3 features in it at same time
Can use copper wire instead of iron wire
Bro do u have a 1 controller that work if u set the Bluetooth controller mode or obstacle avoidance mode and voice control mode?
Your blog awesome ❤from india
Yay! Thank you!
Bro! Amazing, thank you very much
Thanks
my project selected😀😀😀😀😀😀😀😀
Bro the motor shield which you used in the vid is different then the shield you have attched in the description
Awesome bro👏🏻👏🏻👏🏻👍🏻👍🏻👍🏻
Thanks ✌️
Is this robot can all the 3 three at once or one by one
Yes it's works
@DevSky thank you so much
Thank you for this
My pleasure!
Thank you so much sir for the help me🎉🎉🎉🎉🎉🎉🎉
Keep watching
Good luck
Great.. What is the name of this software who we can connect on bluetooth plx name..
Nice car bro
instead of bluetooth can we use joystick and can we make use of all the facilities like, obstacle avoiding, voice control , and moving
Did that apps is available everywhere or we need to make it ? The app to control the movement ( dc control)
WOW!
hello just looking like a wow
Hello, thank you very much, good video.
Thank you too
Estaría mejor , que pudiera combinarse el comando de vos y el sensor que aunque tú le digas go si detecta un objeto se detenga o no avace 😅 o busque la manera de seguir adelante