I'm just going to say, I was hesitant on installing this, then I watched this video and it took me less than 5 minutes to do. ZERO issues. Thanks for this video!
I develop technical manuals for various military platform maintenance instructions. I am extremely impressed with your methodical and steady approach, which yields ease of understanding and clearly explained steps. The end result is the successful replacement of the Sig Sauer P365 original stock trigger with the Armory Craft flat trigger. I appreciate your calm approach in which I successfully replaced the trigger following your instructions the first time and all parts re-installed the first time with no issues as well. I think your recommendation to watch the video all the way through before attempting to perform the procedure is excellent advice. I watched the video twice and when I performed the procedure while listening a third time, I felt as if I had already replaced the trigger, so nothing felt foreign because your video instructions are so clear and easy to follow. In addition to this video, I combined it with the manual safety installation to ensure I included the correct steps for removing the safety to gain access to the pin to be able to remove the take down lever safety bar. Combining the two procedures enabled me to successfully replace the trigger with no issues. Excellent job! Thanks for taking the time to support gun enthusiasts to work on their own firearms with the assistance of a licensed gunsmith.
Your videos are hands down the best on the internet. Hands down. And on top of that, anytime I’ve bought anything from your website it has arrived super quickly with no problems at all. You’re doing the world a great service here, Sig Guy. Thank you.
Thanks again. I used this when I put my AC trigger in last year and my granddaughter and I just put the AC trigger in her new 365XL today, thanks to this video.
@@SigGuy she did it all except the spring. She struggled with that using the needle-nose pliers and the pick, so I did that one step. She kept pausing the video to make sure she was doing each step correctly. My granddaughter, like my daughter, wants to know how things work and they don't mind getting their hands dirty.
Thank you! I didn’t think I was ever going to get my P365 back together. This is so much better than another video that just tells you to tap the trigger bar and it will fall into place. Impossible!
Thank you! My Sig had a critical trigger failure at three rounds(literally brand new). The trigger bar spring snapped. Sig was uncooperative on fixing it for me, and a gunsmith was expensive. This saved me time and revived the only Sig I’ll ever buy!
Thank you Sig Guy! I ordered an Armory Craft trigger for my new P365 X Marco on Thursday and just finished installing it thanks to this video and your Deluxe DARK tool kit!
Found this video in the midst of rage quitting and treating my FCU like I’m 13 and it’s my Xbox controller after losing a heated 1v1 me on rust. Thank you for taking the time to make this video!
I was cleaning my gun and i took out my FCU for the first time to get a little deeper into it. My takedown safety bar fell out and i was in a panic. This is my EDC and i was planning a range day tomorrow. I thought i rendered my gun useless and i would have to wait to take it into a gunsmith. This video saved my ass! Thank you!
@@SigGuy , hey SSG you never really replied but I asked once about shortening the trigger creep and raising the trigger pound to ensure safety. I've looked at my P365 FCU and figured if I just shave a little off the sear where the striker face rest or maybe a very small shave on both the sear and trigger face would shorten the creep. Then I would buy a heavy trigger spring to raise the trigger pull from +5 to hopefully 8 pound pull. What are your thoughts?
Yahooblows me personally I modify my EDC pistols very little. I tried a companies spring kit and I had nothing but feed, extract and light primer strikes. Took it out immediately. Risk is not worth the reward (which with the 365 there is none because there is very little you can do with the action.
Thanks for the video! Took a bit of a shortcut on my 365xl MS because I couldn’t do it exactly the way you did since the safety was in the way for one of the steps but the video still kept me on track! Many thanks. 🇺🇸🇺🇸🇺🇸
I wish I had the safety conversion kit at the making of this video. It literally takes 10 seconds to take off the manual safety assembly. It would’ve helped so many people.
Patience is a virtue, and I have NONE. Your video is so detailed that my triggger installation was so fluent and smooth that for a second or two I thought I am a PRO. I was laughing at you when your trigger bar spring popped out- yeah I am an Evil. SAS has different take down lever but once again with your video it was easy to figure out the position of the lever. Many Thanks !!!! My Apologizes for laughing.
Thanks for producing this video. It walked me right through the installation of the Sig OEM flat trigger yesterday. Very pleased with the feel of it. As you stated, the last step was the hardest by far. Overall, not a bad side project and saved me the $50 of having a gunsmith do it. Again, thanks!
Ryan Cook excellent feedback and congrats! Haven’t heard from one person that wasn’t able to complete this install. Very satisfying when you can do it yourself! Nice work bud.
Great video, much appreciate it. I'd say this job is medium plus difficulty of a 7 out of 10, this video made it doable for a medium skill guy with proper tools.
VERY comprehensive!!! You made it nearly idiot proof. All the tutorials should be like this. I'm a Glock armorer and Colt armorer but new to Sig, so this was just what I needed. I tried following another guy on here, and he was running through it like he had a drill standing over him with a stop watch. Thank you
Excellent compliment! Thank you very much. I try to make it as simple as possible so the success for everybody is almost 100%! No matter who you are. Thank you very much for taking the time to leave feedback. I really appreciate it. 🙏🏼
Sig Sauer Guy has done an excellent & professional job putting together this install video. The P365 trigger upgrade is very intimidating for me to attempt. Thank you very much for your fine work.
Thank you very much for the compliment and good job! The funny thing is, I have redone this video to a more current better version in my opinion yet this is the one that gets all the views lol.
Very good video. I have the manual safety 380 version. The main difference between mine and this video is that there is no drifting of the silver pin shown at the beginning.
Bought a new P365 Spector Comp wanted gold trigger, called two gunsmith said it would take 2 weeks to install. Thanks to this video I did it in 40 minutes! Really appreciate your help worked great. Thank you so much!
OMG...you are a life saver. I added a manual safety to my Sig P365 XL (so wife can use) but had issues with the slide lock bar & slide lock. This video helped out so much to get them back in with ease. You gotta a new subscriber.
Thanks for this. Just completed it and admittedly a bit more technical than I originally thought it would be. Had to check the other vid too since slide catch fell out. Cheers!
Just bought a P365 today, I want to change to a flat trigger because I prefer them. This video is going in to the Sig list. Thank you for the excellent video!
Your video was very helpful for my first 365 trigger swap. As others mentioned, I especially appreciated your mention of the takedown bar retaining pin coming in two different colors. Thank you.
I used a micro flat head screw driver instead when installing the safety bar after several attempts got it on one try following your instructions. Great video. Safety bar was the only difficulty I came across
Thank you. Just worked on my first ever gun and your instructions were amazing. I did eff up the safety lever but I watched your other video and was able to get it all back in. A lot easier than I initially thought.
Fantastic, in-depth video and explanation. As you said, it's always a great idea to take pictures as you go, it really helps and takes the guess work out of the task
Followed this video step by step just as it is presented made for an easy install. As you said, it should be watched through fully before attempting. Do that and it can be done in almost the same time as the video. Also, as you emphasize, don’t get frustrated when things don’t just drop into place. Thanks again for making easy work of what people fear doing. PS Found a great medical TH-cam showing open hear surgery. Gonna watch it at least 3 times first to be on the safe side before I give it a try. Kidding aside, thanks again for a job well done.
Thanks so much for this. Watched the video twice and then attempted to install an AC red flat trigger on my 365.. Took me 30 minutes, about half of that with the last step. I found that putting very, very gentle pressure on the pick to push the takedown lever as far outboard as possible, and the safety bar as far inboard as possible, with very gentle downward pressure on the bar did the trick for me (you say as much in your video) but I was hesitant at first to use any pressure at all, but when I did, it popped into place!
Excellent feedback! Thank you very much. This video is pretty old though. I have updated newer ways to do this procedure on my TH-cam channel. Either way congratulations and good job!
To update this post, I have subsequently removed the AC trigger and replaced it with the OEM flat trigger from Sig, which came with a new trigger spring and pin. Now the trigger breaks at 90 degrees very similar to my 365 XL and X series 320. I found a bit less take up and a slightly crisper break with Sig, and of course the AC trigger broke a little further back, to my liking, anyway.
Great tutorial. I was very hesitant installing a Sig 365 flat trigger. I watched this video 5 times prior to attempting trigger replacement. Took me less than an hour with fingers "crossed". IMHO this is the best video. I did other watch replacement trigger installs but again the step by step process was easy to follow. The close up installation detail photos were terrific thus my trigger Sig flat trigger install was successful!
Great video, thanks so much! I just replaced my trigger in about 10 minutes with a 90 degree pick and needle nose pliers. And for those wondering if there is a difference for the version with the manual thumb safety (P365 MS), the job is exactly the same- you just push the silver pin out until it touches the underside of the safety and continue from there.
Welcome to mid 2023 where this video is still relevant. Had me able to swap the x macro's flat trigger to the oem curved trigger in the time span of the video plus a few minutes to account for pausing. Thanks Sig Guy!
Many, many, many huge thanks for you doing this and the companion video on the slide catch lever...I could not have accomplished this without your video. Thanks again.
Thanks for tutorial! I was able to follow this video and finished the installation without any issues. Great job! Easier than I thought. I do have the manual safety. For those with manual safety, the installation is no difference. Actually make it easier. When you try to loose safety pin without going too far. The safety lever stop you going too far and keep everything in place. Make it easier!!
I know this is an old video, but I wanted to say thank you brother! That takedown lever bar fell out on my XL and getting it all back together was giving me fits.
Great video. It saved me from having to send my gun to a gunsmith for reassembling it. The ety lever and slide catch install video also comes very handy. Thanks!
Great video. Thanks for explaining the step by step process. I found using the screwdriver you supply in the Dark kit with the notch made the trigger spring removal, and install super easy, since it traps the spring in the v groove. Thank you for selling your tool kits.
I don't know if you still monitor the comments in this video, but I still wanted to thank you for posting it. I just successfully changed my OEM P365 trigger out for one of Sig's flat triggers using your video. That little trick you did with the pick to get the take-down bar back into the slot was masterful and allowed me to get it back in place in less than a minute. Your overview of how the parts fit and interact made it all that much easier. Thank you for a great video!
Yes sir I still monitor comments. Thank you very much for the compliment and congratulations on getting your trigger installed. I have changed my process a little bit as you can see in the updated video I have on here. Both will get the job done e though. Again thank you. Have a great weekend.
Thank you so much for this video. I watched a couple of others that weren't very precise or clear. After watching your video I had the trigger in and my gun back together in about 20 minutes, no problems at all.
Great video. Followed it along and installed a new Sig flat trigger. My pistol has the thumb safety. I found that the safety will not let you pull the two step pin out too far. At the same time the lower step becomes even with the frame, the pin makes contact with the safety lever. Otherwise went exactly as viewed.
Got my e-mail today 6-8-2019 that my trigger has been shipped, I ordered it after watching your video 4-13-2019, such a high demand for their trigger and Armory Craft kept me updated the whole time.
I just installed the AC mag release I purchased from you and it’s awesome. I just got my XL and I can’t stop tinkering. I’ve also done a Sig LXG module, Holosun 407k, a couple 15 round mags and I just ordered a copper True Precision threaded barrel. I’m here to see if I want to mess with the trigger so thanks for all the great content.
Great video!!! Thanks for the step-by-step procedure and explanations. Like what you said, 'make sure you have a lot of patience if the parts don't match up instantly'. I have to do the installation of take down lever about five times :)
Thanks for the video! Watched it once all the way through to get an idea of the steps, then a second time while installing my oem Sig flat trigger. I got lucky...everything fell back into place on the first try.
This is one of the best instructional videos I've ever seen. Very well done. Thanks. I just replaced my buddies macro trigger in about 15 minutes from takedown. Plus learned the guts so I got something out of it too. I want that Macro...
This is an oldie but still very popular. I’ve done an updated video as well. Check it out if you want. Perhaps an easier method is used. Thank you very much for the compliment. I really appreciate it.
@@SigGuy Yeah I saw that one too. Sorry to keep going but I'm a former technical trainer & technical writer for x-ray systems & dude your overall method is the best I've ever seen. Out of curiosity, do you have a technical troubleshooting background?
*Sig Sauer Guy* I found if I took a skinny panhead screw driver and ground an 1/8 Notch in the blade . It makes taking out and re-installing the trigger spring a 2 second job : Just sharing
Great video, man. Watched it twice before installing a red flat AC trigger. Couldn't have gone any smoother. Love the detail of your videos. I also installed a sniper grey and now have a Titanium grey grip module. I have the manual safety but the install of the trigger was basically the same. Thanks for a great video!
ABSOLUTELY FANTASTIC VIDEO. Excellent quality. Patient and detailed explanations. This made it super easy for me to install my AC P365 flat trigger. Thank You!!!
Yup Dude...Your a Rock star!!!!Installed my new trigger 1st shot while watching and pausing your video.One of the best how to vids I ever seen....Nice job and thanks for taking the time to help...
Thank you for the great video. It was very easy to follow and I really appreciate your calm delivery of information. Things went smoothly and I now have my new trigger installed.
Great video, I have the flat trigger coming in the mail Friday so I will be putting it in, I watch it twice but I will watch it a few more times and when I start on putting it in I will bring this video up and do it step-by-step, thanks.
I installed with no issues and I had fun while at it, I was actually sad to finish, I kind of want to re-install it all over again. Thanks for your help.
Great, great video and done at the right speed and detail that I could keep up with you. Just did my trigger and couldn’t have done it without you! Thanks!
Just watched this again, and it saved me all sorts of aggravation. I installed a Grayguns adjustable P365 trigger and was having trouble with the bar going into the takedown lever, and let me tell you, the installation is further complicated by having a thumb safety on my FCU (I’m in MA). So thank you again Eric. Edit: Oh, and I pulled the pin out too far and the safety lever fell out. Again, I think reassembly is complicated by the thumb safeties which I didn’t take off. All my best.
@@SigGuy what made mine even worse is I have a manual safety. I was able to figure it out before you responded. I was shooting in the dark at hitting the hole, but with patience I was able to get the pin in the hole. Reassembled everything and all functions well. I’ll go bust some caps tomorrow for a real function check. Thank you for your response.
This was a fantastic video. It gave me all the info. I needed as well as the confidence to successfully install a Sig flat trigger. Your video saved me money and time. Thanks.
I feel like you’re talking directly to me when you say “Do not get agitated, Do not force things”! Thank you for that Sir!
I was! 😏
If you don't get agitated, you're not a gunsmith.
I'm just going to say, I was hesitant on installing this, then I watched this video and it took me less than 5 minutes to do. ZERO issues. Thanks for this video!
now to get up the courage for the spring kit :)
I develop technical manuals for various military platform maintenance instructions. I am extremely impressed with your methodical and steady approach, which yields ease of understanding and clearly explained steps. The end result is the successful replacement of the Sig Sauer P365 original stock trigger with the Armory Craft flat trigger. I appreciate your calm approach in which I successfully replaced the trigger following your instructions the first time and all parts re-installed the first time with no issues as well. I think your recommendation to watch the video all the way through before attempting to perform the procedure is excellent advice. I watched the video twice and when I performed the procedure while listening a third time, I felt as if I had already replaced the trigger, so nothing felt foreign because your video instructions are so clear and easy to follow. In addition to this video, I combined it with the manual safety installation to ensure I included the correct steps for removing the safety to gain access to the pin to be able to remove the take down lever safety bar. Combining the two procedures enabled me to successfully replace the trigger with no issues. Excellent job! Thanks for taking the time to support gun enthusiasts to work on their own firearms with the assistance of a licensed gunsmith.
This was an EXCELLENT tutorial on replacing the trigger and spring assembly/ First rate. Followed it step by step and it was a breeze.
Your videos are hands down the best on the internet. Hands down. And on top of that, anytime I’ve bought anything from your website it has arrived super quickly with no problems at all. You’re doing the world a great service here, Sig Guy. Thank you.
Thank you very much for the great feedback and compliment. I really appreciate your support sir.
Excellent video, very well detailed. I’ve done three trigger changes now. And they’ve all been super easy thanks to this video.
Outstanding job. I’m usually not the guy looking up help. Thank You.
Thanks again. I used this when I put my AC trigger in last year and my granddaughter and I just put the AC trigger in her new 365XL today, thanks to this video.
Excellent! Next time have your granddaughter do it for you. I bet she can! Nice work bud.
@@SigGuy she did it all except the spring. She struggled with that using the needle-nose pliers and the pick, so I did that one step. She kept pausing the video to make sure she was doing each step correctly. My granddaughter, like my daughter, wants to know how things work and they don't mind getting their hands dirty.
Thank you! I didn’t think I was ever going to get my P365 back together. This is so much better than another video that just tells you to tap the trigger bar and it will fall into place. Impossible!
Thank you! My Sig had a critical trigger failure at three rounds(literally brand new). The trigger bar spring snapped. Sig was uncooperative on fixing it for me, and a gunsmith was expensive. This saved me time and revived the only Sig I’ll ever buy!
I did this swap in 20 minutes. Your step by step walk through is perfect. Cheers!
Thank you Sig Guy! I ordered an Armory Craft trigger for my new P365 X Marco on Thursday and just finished installing it thanks to this video and your Deluxe DARK tool kit!
Found this video in the midst of rage quitting and treating my FCU like I’m 13 and it’s my Xbox controller after losing a heated 1v1 me on rust. Thank you for taking the time to make this video!
I was cleaning my gun and i took out my FCU for the first time to get a little deeper into it. My takedown safety bar fell out and i was in a panic. This is my EDC and i was planning a range day tomorrow. I thought i rendered my gun useless and i would have to wait to take it into a gunsmith. This video saved my ass! Thank you!
Just wanted to thank you for the tutorial. Flat trigger installed and I couldn't be happier.
S C™ awesome. Good job bud. I appreciate the positive feedback also thank you!
@@SigGuy , hey SSG you never really replied but I asked once about shortening the trigger creep and raising the trigger pound to ensure safety. I've looked at my P365 FCU and figured if I just shave a little off the sear where the striker face rest or maybe a very small shave on both the sear and trigger face would shorten the creep. Then I would buy a heavy trigger spring to raise the trigger pull from +5 to hopefully 8 pound pull. What are your thoughts?
Yahooblows me personally I modify my EDC pistols very little. I tried a companies spring kit and I had nothing but feed, extract and light primer strikes. Took it out immediately. Risk is not worth the reward (which with the 365 there is none because there is very little you can do with the action.
@@SigGuy ,ok. I'll wait it out, I think sooner or later some company will make a shorter trigger for the P365 eventually since it's so popular.
@@yahooblowsme4598 The Sig Armorer does an action job for the 365 that will take care of what you are looking for.
Thanks for the video! Took a bit of a shortcut on my 365xl MS because I couldn’t do it exactly the way you did since the safety was in the way for one of the steps but the video still kept me on track! Many thanks. 🇺🇸🇺🇸🇺🇸
I wish I had the safety conversion kit at the making of this video. It literally takes 10 seconds to take off the manual safety assembly. It would’ve helped so many people.
Patience is a virtue, and I have NONE. Your video is so detailed that my triggger installation was so fluent and smooth that for a second or two I thought I am a PRO. I was laughing at you when your trigger bar spring popped out- yeah I am an Evil.
SAS has different take down lever but once again with your video it was easy to figure out the position of the lever.
Many Thanks !!!!
My Apologizes for laughing.
David G. And comments like this my friend are what make it all worth doing. That’s awesome. Congrats pro! 🤙🏼
This helped me over a year ago, and it helped again today. Thank you for putting this together.
Thanks for producing this video. It walked me right through the installation of the Sig OEM flat trigger yesterday. Very pleased with the feel of it. As you stated, the last step was the hardest by far. Overall, not a bad side project and saved me the $50 of having a gunsmith do it. Again, thanks!
Ryan Cook excellent feedback and congrats! Haven’t heard from one person that wasn’t able to complete this install. Very satisfying when you can do it yourself! Nice work bud.
Great video, much appreciate it. I'd say this job is medium plus difficulty of a 7 out of 10, this video made it doable for a medium skill guy with proper tools.
VERY comprehensive!!! You made it nearly idiot proof. All the tutorials should be like this. I'm a Glock armorer and Colt armorer but new to Sig, so this was just what I needed. I tried following another guy on here, and he was running through it like he had a drill standing over him with a stop watch. Thank you
Excellent compliment! Thank you very much. I try to make it as simple as possible so the success for everybody is almost 100%! No matter who you are. Thank you very much for taking the time to leave feedback. I really appreciate it. 🙏🏼
Sig Sauer Guy has done an excellent & professional job putting together this install video. The P365 trigger upgrade is very intimidating for me to attempt. Thank you very much for your fine work.
Thank you very much sir for the kind words! I really appreciate it.
Thank you for the tutorial I was able to replace my trigger in 15 min. My gunstore wanted to charge me 80 dollars to do it. Great job THX
Thanks for the video. Best one I found on the trigger install. Just put the flat trigger in my P365 so I have the same set up on that and my xl.
Thank you very much for the compliment and good job! The funny thing is, I have redone this video to a more current better version in my opinion yet this is the one that gets all the views lol.
@@SigGuy I guess the algorithm finds this one first lol. Incredibly helpful even if it wasn't as good as the new one lol.
Awesome video! Took me about 40 minutes, including cleaning and greasing, to install the slightly-curved AC trigger.
This video is spot on. You made this install easy. Thank you sir!
Very good video. I have the manual safety 380 version. The main difference between mine and this video is that there is no drifting of the silver pin shown at the beginning.
This Sig Guy video... still helping people out after three years. Thanks.
Funny thing is there is a newer better video than this one. Yet this one gets all the love. Lol. Thanks for watching bud.
This is the best installation video on TH-cam for this trigger. Very well done
Steve Brown haha. Thanks brother. Really appreciate the compliment!!!
A masterpiece, well explained and very much appreciated. Thank you Sir!
Bought a new P365 Spector Comp wanted gold trigger, called two gunsmith said it would take 2 weeks to install. Thanks to this video I did it in 40 minutes! Really appreciate your help worked great. Thank you so much!
Excellent! Much more satisfying when you are able to do it yourself. Saving $$$ is a nice as well! Nice work! 👌
Fantastic video. Seriously, provided great step by step info with necessary details and close ups while explaining the “Don’ts” thanks!
Being a Sig fan, your videos have helped me with my P320's and now tge P365. Very detailed and easy to follow tutorials.
Perfect! Thank you very much for the compliment. Reward is when others can do it on their own. 🤙🏼
OMG...you are a life saver. I added a manual safety to my Sig P365 XL (so wife can use) but had issues with the slide lock bar & slide lock. This video helped out so much to get them back in with ease. You gotta a new subscriber.
I really like your tutorial video. I like the close up stills of a part. Great work! Thank you.
Thank you for taking the time to leave great feedback. I appreciate it. 🙏🏼
Thanks for this. Just completed it and admittedly a bit more technical than I originally thought it would be. Had to check the other vid too since slide catch fell out. Cheers!
Chase Mullins congrats bud! Nice work!!!
Just bought a P365 today, I want to change to a flat trigger because I prefer them. This video is going in to the Sig list. Thank you for the excellent video!
Thank you very much for the compliment and good luck sir! You’ve got this!
Your video was very helpful for my first 365 trigger swap.
As others mentioned, I especially appreciated your mention of the takedown bar retaining pin coming in two different colors.
Thank you.
I used a micro flat head screw driver instead when installing the safety bar after several attempts got it on one try following your instructions. Great video. Safety bar was the only difficulty I came across
Eddie B agree. It either goes in easily or is a pain in the butt.
Thank you. Just worked on my first ever gun and your instructions were amazing. I did eff up the safety lever but I watched your other video and was able to get it all back in. A lot easier than I initially thought.
Nice work bud!!!! WINNING! 🤙🏼
I love this guy! Got my slightly curved Armory Craft Trigger in with a breeze. You just can't get any more detailed and clearer than this tutorial.
Fantastic, in-depth video and explanation. As you said, it's always a great idea to take pictures as you go, it really helps and takes the guess work out of the task
Followed this video step by step just as it is presented made for an easy install. As you said, it should be watched through fully before attempting. Do that and it can be done in almost the same time as the video. Also, as you emphasize, don’t get frustrated when things don’t just drop into place. Thanks again for making easy work of what people fear doing.
PS Found a great medical TH-cam showing open hear surgery. Gonna watch it at least 3 times first to be on the safe side before I give it a try. Kidding aside, thanks again for a job well done.
Ok this is one of the best tutorials I’ve seen on TH-cam. You must know me. He reinforced the idea of not letting it get you frustrated. Thanks
Thanks so much for this. Watched the video twice and then attempted to install an AC red flat trigger on my 365.. Took me 30 minutes, about half of that with the last step. I found that putting very, very gentle pressure on the pick to push the takedown lever as far outboard as possible, and the safety bar as far inboard as possible, with very gentle downward pressure on the bar did the trick for me (you say as much in your video) but I was hesitant at first to use any pressure at all, but when I did, it popped into place!
Excellent feedback! Thank you very much. This video is pretty old though. I have updated newer ways to do this procedure on my TH-cam channel. Either way congratulations and good job!
To update this post, I have subsequently removed the AC trigger and replaced it with the OEM flat trigger from Sig, which came with a new trigger spring and pin. Now the trigger breaks at 90 degrees very similar to my 365 XL and X series 320. I found a bit less take up and a slightly crisper break with Sig, and of course the AC trigger broke a little further back, to my liking, anyway.
Great tutorial. I was very hesitant installing a Sig 365 flat trigger. I watched this video 5 times prior to attempting trigger replacement. Took me less than an hour with fingers "crossed". IMHO this is the best video. I did other watch replacement trigger installs but again the step by step process was easy to follow. The close up installation detail photos were terrific thus my trigger Sig flat trigger install was successful!
Great video, thanks so much! I just replaced my trigger in about 10 minutes with a 90 degree pick and needle nose pliers. And for those wondering if there is a difference for the version with the manual thumb safety (P365 MS), the job is exactly the same- you just push the silver pin out until it touches the underside of the safety and continue from there.
Larry Shreddy good to know bud. Thanks for the update!!
Awesome to know. I was wondering whether I needed to remove the manual safety to replace the trigger. Thanks.
Larry Shreddy Thank you!
Welcome to mid 2023 where this video is still relevant. Had me able to swap the x macro's flat trigger to the oem curved trigger in the time span of the video plus a few minutes to account for pausing. Thanks Sig Guy!
Many, many, many huge thanks for you doing this and the companion video on the slide catch lever...I could not have accomplished this without your video. Thanks again.
Mel and Julie Miller anytime my friend. Thanks for the kind words. Congrats!!
Thanks for tutorial! I was able to follow this video and finished the installation without any issues. Great job! Easier than I thought. I do have the manual safety. For those with manual safety, the installation is no difference. Actually make it easier. When you try to loose safety pin without going too far. The safety lever stop you going too far and keep everything in place. Make it easier!!
Awesome! Ya I was wondering about that. My trigger in on it's way!! 🤘
Awesome
Just finished installing my flat trigger.
I know this is an old video, but I wanted to say thank you brother! That takedown lever bar fell out on my XL and getting it all back together was giving me fits.
Great video. It saved me from having to send my gun to a gunsmith for reassembling it. The ety lever and slide catch install video also comes very handy. Thanks!
Today I followed this guide step-by-step to install a new trigger and it went perfectly, thanks!
Great video. Thanks for explaining the step by step process. I found using the screwdriver you supply in the Dark kit with the notch made the trigger spring removal, and install super easy, since it traps the spring in the v groove. Thank you for selling your tool kits.
Well there ya go! Nice idea. Thanks for sharing. I really appreciate the feed back bud and thank you for your support. 🙏🏼
I don't know if you still monitor the comments in this video, but I still wanted to thank you for posting it. I just successfully changed my OEM P365 trigger out for one of Sig's flat triggers using your video. That little trick you did with the pick to get the take-down bar back into the slot was masterful and allowed me to get it back in place in less than a minute.
Your overview of how the parts fit and interact made it all that much easier.
Thank you for a great video!
Yes sir I still monitor comments. Thank you very much for the compliment and congratulations on getting your trigger installed. I have changed my process a little bit as you can see in the updated video I have on here. Both will get the job done e though. Again thank you. Have a great weekend.
Still needed to view this again this morning installing the new AC trigger on my P365XL....Thank you again sir.
just installed my Armory Craft Sig Sauer flat trigger. Could not have done this without your video. Thanks from Long Island!!
Good to hear! I’m glad it was helpful. You deserve all the credit though! 🤙🏼
Just installed my Armory Craft trigger with the help of your video. Great step by step instructions! Thank you!
Jeff Napalan awesome. Great follow up post!! Thank you for sharing! 🤙🏼
This video saved my life. Soooo good. Thank you!
Thank you for this excellent video. The pace was perfect.
Thank you so much for this video. I watched a couple of others that weren't very precise or clear. After watching your video I had the trigger in and my gun back together in about 20 minutes, no problems at all.
Awesome! Nice work brother. Thank you for the compliment also! 🙏🏼
Great video. Followed it along and installed a new Sig flat trigger. My pistol has the thumb safety. I found that the safety will not let you pull the two step pin out too far. At the same time the lower step becomes even with the frame, the pin makes contact with the safety lever. Otherwise went exactly as viewed.
If not the best, i'd say easy one of the best tutorial/How to videos i've ever seen. Just did mine step by step. Thanks
Comments like yours are always the best! Thank you sir I really appreciate it.
@@SigGuy Absolutely, I’m currently having breakfast and taking pictures of the 365 after the trigger swap 🤣 can’t get enough of her now.
This channel is great, I just switched the extended slide release & a curved trigger into my xmacro. Thank you!
Thank you very much for the compliment and good work out of you! 🤙🏼
Just got my trigger and shirt today, thank you for this video. Fastest 23 minutes and 21 seconds ever.
Great video! Just helped me install the Sig factory flat trigger. Saved me $50.00 the gunsmith wanted to charge me to do it. Thanks again!
Got my e-mail today 6-8-2019 that my trigger has been shipped, I ordered it after watching your video 4-13-2019, such a high demand for their trigger and Armory Craft kept me updated the whole time.
Larry Baker awesome!!! Can’t wait to see it installed!
I just installed the AC mag release I purchased from you and it’s awesome. I just got my XL and I can’t stop tinkering. I’ve also done a Sig LXG module, Holosun 407k, a couple 15 round mags and I just ordered a copper True Precision threaded barrel. I’m here to see if I want to mess with the trigger so thanks for all the great content.
Excellent!!! Nice work. Funny most do the trigger first! You’ve got this.
With this instruction video I had no trouble installing a GG flat trigger. Very satisfying to do it on my own!!! To the range this week😃
Thomas Geisler that is good to hear. So much more satisfaction when you do it yourself. Good job. Have fun!!
Great video!!! Thanks for the step-by-step procedure and explanations. Like what you said, 'make sure you have a lot of patience if the parts don't match up instantly'. I have to do the installation of take down lever about five times :)
Renato Felias but you were successful! I’m willing to bet next time is a lot smoother for you. Nice work sir!
Thanks for the video! Watched it once all the way through to get an idea of the steps, then a second time while installing my oem Sig flat trigger. I got lucky...everything fell back into place on the first try.
You made this project easier than I expected. Love the new look. Thank you from Seattle
Pistolpeter 1911 awesome!! Thank you very much for the compliment!
Best "how to" video on the install of the flat trigger. Excellent. Thank you for your help
Kevin Williams excellent compliment! Thank you sir. I really appreciate that. 👍🏼
Thanks for doing this, it's going to make my installation much easier, once my trigger gets here...
This is one of the best instructional videos I've ever seen. Very well done. Thanks. I just replaced my buddies macro trigger in about 15 minutes from takedown. Plus learned the guts so I got something out of it too.
I want that Macro...
This is an oldie but still very popular. I’ve done an updated video as well. Check it out if you want. Perhaps an easier method is used. Thank you very much for the compliment. I really appreciate it.
@@SigGuy Yeah I saw that one too. Sorry to keep going but I'm a former technical trainer & technical writer for x-ray systems & dude your overall method is the best I've ever seen. Out of curiosity, do you have a technical troubleshooting background?
Thank you for making the upgrade possible through your awesome tutorial. I installed my flat trigger today thanks to your help.
Great video! I used it to install the flat trigger from Sig, now to the range!!
Thank you for the great tutorial. I watched it twice and swapped out my trigger in less than ten minutes.
Hardy Swinson another success! That’s awesome. If you are in the discussion only 365 group on FB post them pics!
Wow, nice presentation. Installing Armory Craft flat trigger was a piece of cake after watching this. Well done, thanks.
And thank you for the great compliment! Another success story. Love to hear it. Nice work sir!
Tremendous instructional video paying attention to details and anticipating problems. Thank you!
Thanks for the tutorial. Completed the install in about 10 minutes with no problems. Can't wait to try it out now.
Thank you and nice work brother! 🤙🏼
*Sig Sauer Guy*
I found if I took a skinny panhead screw driver and ground an 1/8 Notch in the blade . It makes taking out and re-installing the trigger spring a 2 second job : Just sharing
Great video, man. Watched it twice before installing a red flat AC trigger. Couldn't have gone any smoother. Love the detail of your videos. I also installed a sniper grey and now have a Titanium grey grip module. I have the manual safety but the install of the trigger was basically the same. Thanks for a great video!
🙌🏼🙌🏼🙌🏼 Excellent!!!!! Awesome color selection also! My favorite. Well done sir! 👌🏼👍🏼🤙🏼
Thought the take down lever was gonna be the death of me and my wife, but we finally managed to get it! Thank you!
Awesome video tutorial. It encouraged me to order a flat trigger from Sig for my soon to arrive P365. Thank you Sir!
Oh, and I almost forgot. I also ordered a P365 cleaning mat as well. :)
ABSOLUTELY FANTASTIC VIDEO. Excellent quality. Patient and detailed explanations. This made it super easy for me to install my AC P365 flat trigger. Thank You!!!
Awesome. So good to hear all the success stories. Thank you for the great compliment sir. Appreciate it very much.
This video was perfect! Great advice to watch all the way through and to be patient instead of forcing it 👏🏾
Yup Dude...Your a Rock star!!!!Installed my new trigger 1st shot while watching and pausing your video.One of the best how to vids I ever seen....Nice job and thanks for taking the time to help...
L I Digga haha. And you earn the best comment award! 🤙🏼 haha. Awesome man! Nice work.
Thank you for the great video. It was very easy to follow and I really appreciate your calm delivery of information. Things went smoothly and I now have my new trigger installed.
Great video, I have the flat trigger coming in the mail Friday so I will be putting it in, I watch it twice but I will watch it a few more times and when I start on putting it in I will bring this video up and do it step-by-step, thanks.
I installed with no issues and I had fun while at it, I was actually sad to finish, I kind of want to re-install it all over again. Thanks for your help.
Haha. That’s awesome. A solid reason to BUY ANOTHER 365! ❤️
This was a big help and made the swap easy thanks so much for the video !
Thanks for the video, I took my time, paused the video at each step and everything fell right into place.
Great, great video and done at the right speed and detail that I could keep up with you. Just did my trigger and couldn’t have done it without you! Thanks!
Mission accomplished for me! Thank you for the feedback. So much more rewarding when you can do it yourself isn’t it?! Good job brother.
Appreciate the video, just fished the install and all went smoothly thanks to your in depth directions. Thanks
Randy Sap good to hear. Thank you for the compliment sir.
Just watched this again, and it saved me all sorts of aggravation. I installed a Grayguns adjustable P365 trigger and was having trouble with the bar going into the takedown lever, and let me tell you, the installation is further complicated by having a thumb safety on my FCU (I’m in MA). So thank you again Eric.
Edit: Oh, and I pulled the pin out too far and the safety lever fell out. Again, I think reassembly is complicated by the thumb safeties which I didn’t take off. All my best.
Mark S Delaney anytime brother. If you ever need help just shoot me a PM on FB. Excellent you got it done! 🤙🏼
@@SigGuy was doing flat trigger install on Sig P365. I pulled the pin out too far and safety bar fell out. How does it go back in?
@@Mudbug0458 th-cam.com/video/e1DeX_8AOh8/w-d-xo.html
@@SigGuy what made mine even worse is I have a manual safety. I was able to figure it out before you responded. I was shooting in the dark at hitting the hole, but with patience I was able to get the pin in the hole. Reassembled everything and all functions well. I’ll go bust some caps tomorrow for a real function check. Thank you for your response.
@@Mudbug0458 mission complete. Nice work bud. 👌🏼👍🏼
This was a fantastic video. It gave me all the info. I needed as well as the confidence to successfully install a Sig flat trigger. Your video saved me money and time. Thanks.
Mission accomplished for both of us! Nice work bud. Thank you for the compliment also! 🤙🏼
Exceptional video. Ordered mine about an hour ago. Thanks very much. Will be watching this again while installing it. Very good tutorial.
This helped me tremendously! Thanks for making it so clear and concise.