Old Rusty Handmade Knife Restoration
ฝัง
- เผยแพร่เมื่อ 4 มี.ค. 2019
- Hello folks! This handmade rusty knife I found in garage of my dear friend when we work with his car. He told about that knife little story... This big knife he found at fishing near the lake. So of course he gave me this knife and I started to make this restoration project. For first look, I understand that was a handmade old knife and on the handle I seen some parts of epoxy glue.
Well, I started from removing all rusty from knife with electrolysis and sandpapers. After that, I made a bolster, pommel nut and knife handle. Handle of knife I made from Ash-Tree and piece of Oak tree. Also, I used two pieces of light leather. The cross guard I made of stainless steel and pommel nut from head of screw bolt. Thank you all for your support!
Sincerely, Alex. Thanks for attention!
Good luck and health to everyone! With best wishes, Alex!
Please subscribe to my channel: @ScrewsAndTools
🍖 My New Cooking channel! @screwsandtoolscooking
Patreon: / screwsandtools
Paypal: paypal.me/screwsandtools
Facebook: / scresandtools
Instagram: / screwsandtools
#screewsandtools #knife #restoration - แนวปฏิบัติและการใช้ชีวิต
That's a purty little butter knife
Ohh yes)))
My first knife was a hot mess. If that was your first knife, I think you did a remarkable job. As long as the next knife is better than the previous one, you are well on your way to becoming a pretty decent knifemaker.
Thank you!
Perfect. You won an entry. Hug from Brazil.
I wish I had a workshop with all the tools.
If this is your first time? You will be awesome!
good work
Thank you!
That's what I call making the most of what you have. Great job man!
Pp PP
Pp pp
Pp
Pp p PP
Nice ,,,,and,,,, original,,,,,job,,
It looked very nice at the end
5 thumps...👍👍👍👍👍
I think for being your 2nd knife restoration that you did a fantastic job. The handle came out so amazing. The whole knife put together looks pretty nice. Learn from your mistakes and move forward.
Hello, thank you so much for your attention. It was so long ago, in my opinion, my second restoration of the knife)
@@ScrewsAndTools You're very welcome.
A great result, for a now better knife a tool brought back for use
Thank you for attetnion! Oh, it's my second probably knife restoration was))
Good job sir!
Nice work
Are we gonna talk about the casual hand job he gave the handle , or ....?
Plus the "old epoxy"😂
Yeah, it did get a bit like a porn movie, all it needed was some terrible elevator muzak and we would of all been back in the seventies, lol.
Hello, sorry but I can understand what you mean. I use special oil for wood.
Lol... is the way you applied the oil to the handle. It looks like you were rubbing it like you would rub your...... you know.....
@@finoman100 It was just a oil for wood.
Love it
конечно руки у мастера на месте,но вот дизайн хромает и что больше всего меня убивает в таких видио-нахрена все эти заморочки с электролизом и кислотой если потом все равно идет шлифовка наждачной бумагой?)слишком много бесполезной работы на видио ИМХО
По поводу бесполезной работы, мне больше не понятно зачем эти танцы с напильниками и ручным инструментом при наличии дремеля и болгарки)
@@user-qu6yp9qg7f ну я вообщем писал,в таких видео очень много бесполезной работы попадает в кадр
Насчёт бесполезной работы я согласен. К тому же косой-кривой, в болтающихся тисках, тупыми свёрлами, и т.д. А вот об электролизе в соде вы неправы. Наждачка и проволока не залезут в ржавые раковины в складках клинка,- только поверхность шлифонут. ЭЛЕКТРОЛИЗ УБИРАЕТ ВСЕ ОЧАГИ РЖАВЧИНЫ и в недоступных для шлифовки местах, а в доступных отпадает необходимость снимать много металла. К тому же происходит БЕЗ нашего участия и ЛИШНИХ физических УСИЛИЙ!!))
Плохо закреплённые тиски это НЕ ГУД. Но рассверливать гарду дрелью посредством наклона сверла, это просто полный ...ец. Наверное глаза есть запасные ((( Я думаю он очки не надевает, раз так работает ((( А так, руки есть, инструмент есть, желание есть ... Ещё бы ТБ соблюдать.
@@user-oh6qu7tt6v насчёт тисков, так они болтаются вместе с верстаком. два анкера в паркет, и как рукой снимет)))
там и точило на соплях)
но в результате титанического труда клинок спасён от забвения
Looks really sharp😊
Wow you find my second work of knifef restoration! Thank you!
Amazing guy 🤩😍
well done
This is who is the true artist!
Thank you!
Unreal! Looks beautiful!
Мастер-ломастер!
Overall I think you did a great job to be one of your early restorations. The reversed guard may not be historically correct and doesn't look right to us, but isn't even a big deal if you like it that way. Keep on working and making videos.
Thank you for attention and understanding.
I also thank you
yep, usually you don't want sharp pointy ends pointed to YOU ;-)
Good work sir like it👌👌👌
786 ...
Hello Assalamualaikum my name is Mohtashim . Good work boys ...
Man I wasn't sure about the nut on the end of the handle but I'm amazed how well it looks after a couple minutes of grinding it down and polishing it up.
Thank you for attention!
Не в те руки попал этот нож))))....не повезло ему)))))
"Познавательно"(( было посмотреть как криво сверлить, тупыми свёрлами, как их ломать. Как извращаться с надфилем, как сделать гайку, как шиворот-навыворот поставить гарду-больстер и черенок лопаты вместо рукояти на этот тесак и т.п. Это же эксклюзив, никто другой так не умеет и не додумается!!))) А вот об электролизе мог бы подписать реагент и режим В/А, ведь многие думают что это сложно...
Немного странный мастер, да...
@@Zabugoria всяких архимедов и галилеев тоже считали странными... но это я утрирую!
Да,братан, ты сказал то,што хотел сказать я... Особенно про гарду🤕😳
Гарда-это пять!!!!
@@user-dx4px3xi4q ja pro klëpki i dirki
Гамарджоба генацвале, хорошее дело давать вторую жизнь старым ножам!
Спасибо! Ох уж и реставрация старая, куча ошибок и тд))
Great ending.
Спасибо! Порадовал.! Сразу видно русский Ваня. Два сверла сломал, на табуретке - ногой прижму, болгарка есть- руками надежней! Но молодец, сделал что хотел! Сын сказал здорово получилось!👍
Soglasen, mnogo kosiakov bilo no ia uchus i staraus. Spasibo za vnimanie.
Rapaz vc é brilhante ❤
I know this is an old video, but I've sen you do similar on more recent ones. You take great pains to add threads for screw-on pommels to a lot of the blades you restore (and get actually impresively good results, as this video), even those which have holes for rivets to attach scales to a full tang. That is... a bit redundant. :-) End pommels (be them penned or screwed on) are used where the handle is not riveted directly to the tang, but held in place by the guard and the pommel (like _this_one). If you have holes for rivets, you don't need a screw-on pommel, and if you have a screw-on pommel, you don't need rivets.
Замотай в солидол,и закопай назад.... Лет через 50 кто то переделает. Гайка:- это шедевр!!!
I like the way that handle turned out. Great job for some of your first. Keep it up.
Thank you sir!
The handle, artistic, well done.
Почитал комменты😂,полностью согласен🙌,нахрена всё это в ручную, если у него столько профессионального инструмента😵,явно на зрителя😭😭😭!
You are tenacious sir! A job well done.👍👍
Переделка с камы, даже дол смещенный кинжальный, маленькая кваддара , маэстро Вы как всегда на высоте,как всегда ставлю лайк потом смотрю видео.
Это первая или вторая реставрация, там ошибок уйма, так что критика уместна))
@@ScrewsAndTools
нет не критикую, просто сам хочу сделать кваддару и каму, а у Вас все как надо
Love how the knife turned out
Плохо что он из славян,можно было и лучше
Особенно мне момент нравится брать сверло на излом,просто супер
Ohh! Very like me.
Youve came along way in 2 years. This still came out Great...
What an effort, good job. 👍🏻
awesome
The bolster is upside down.
And too tiny and slim
Freethought I noticed that, wonder when he will?
Handle is way too rounded too
@@ceilingfan2608 the handle is the right size for a bloody sword, lol.
Именно да
All that oiling you did on the handle. The visual and the sound was... Inappropriate 😂
It shows craftmanship is not dependent on owning every tool in the store! Thank you for the excellant video,from Mesa,Az.
Thank you sir!
Magnifica
Lindissima
Sem comentarios
Нож из обломка сабли так себе затея, ну а рукоятка на мой взгляд извращение, но проорал как из болта гайку делали )))))) за это лайк давно такого не видел!!!
Oh my you have gone beyond great with this knife.wow.👍🏼🙂
Thank you!
So bad-ass!
I think you did an amazing job because i can't even do 1% of what you did
Thank you so much!
Przepiękny jest ten odrestaurowany cały nuż pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍
Bom trabalho. De restauração
Magnífico 👏👏
7:05 - Couldn't avoid the laugh XD that was too funny.
Anyways. Great job! Good as new.
Thanks!))
Про электролоз знает а что люди болгарку придумали не слышал
паста ГОИ наверно вообще его мир перевернёт)))
Я думал он в ручную сверлить будет.
Напильник лучше болгарки))))))
@@samsnvandrei2120 ну конечно народный способ все таки!
А чего там знать? Я им еще в детстве баловался. Хотя удалять ржу электролизом - последнее дело, слишком жрет металл.
Beautiful knife. You do great work and have fun doing it.
10.54. Станок БДСМ 😀 как и весь показанный труд. Полная мастерская станков.. Нет нодо ручками поебашить.
Weldon
I looooooove this knife
Thank you!
Du bist der Meister im Improvisieren.Gute Arbeit.
Danke!
Give me sir ... very very good work .. keep it up..
Thank you sir!
magar Ale no he won’t give it to you
Oh boy... you made so many mistakes during this project... But i reallt LOVED it. The only person who does no mistakes is the person who does nothing. And you do things you want with tools and materials you have accessible - this is the best thing a man can do ☺Making mistakes is a normal process of learning. Everyone is failing things, then they (hopefully) learn, to do things differently and come out smarter with a lot of experience. This is the way great things are done! Do, fail, learn, do better :) If you keep up, you will be making really amazing things in a few years, i promise you that:)
Just a few advices from an older technician:
- sharp, well maintained tools do work much more efficient (almost all of our drill bits were dull). Only the last one produced a nice strand of chips during the drilling. Learn to sharpen your drills and you will be more happy.
- exchange your saw blade if you can't cut through a normal bolt. They are not that expensive and it will save you A LOT of effort.
- It's hard to use a metal file on a wood;) Invest in a couple of wood files and you will feel much better working with wood.
Otherwise, a great job and a really nice final effect. Keep up a good work and get pleasure from fixing things :)
Hello! Than you for attention. Yes, you're right sir, I'm trying to improve my skills and get more tools. I always watching different videos about knife making and some blacksmith due to I love this theme. Also, thank you for advice, I will consider.
The two things I would have done differently is one, reverse the direction of the hilt. And two, I would have sanded the handle down farther and round out the nut to match the handle contour. Atherwise nice job.
Thank you for attention!
Mto loko essa faca
Никогда так не переживал за человека, как за этого парня, когда у него в рука инструменты...
Awesome informational educational video experience Y'alls God Bless Ya 🙏
Brilliant restoration. I appreciate you don’t have all the tools in your shed that you’d like but that part of the excitement to watch your channel grow. Keep going
Thank you so much! ^_^
I kind of feel like you should ask a museum if they know any history of it. :)
Thanks for sharing. I know is not easy to do, but if it's first experience it's OK. Because when doing some work, you cannot but err sometimes. Keep going.
Thanks!
cool
This was a Very Well Done Restoration !
Thank you!
Такой клинок изуродовать такой ручкой, и в добавок неправильно поставить гарду(((, но старания однозначно, молодец
Точно, запорол клинок и гарду кверху ногами поставил 😆😆😆👍
I have to admit I had doubts at 13:50, but the the finished product is really nice. I really like the way the handle turned out.
Thank you for attention sir!
Amazing job there bro the knife restoration turned out good. I like how you lengthened the tang and added the two black spacers. Thanks for the upload bro. BEEP BEEP
Hello! Thank you! That was my second knife restoiration)
For your second knife restoration that's some good work. I'd like to learn how to do some restoration work but I know ill.end up with spare parts lol. But an amazing job for a second restoration. Thanks for the upload bro BEEP BEEP,
Nice job, looks really good 😀, but I think your bolster is on upside down.
Yeah. thank's for attention!
fantastic
👍👍👍👍👏👏👏👏
oh my god., very impressed at the end. Very sturdy and nice. So much time spent.
Thank you!
I love the job you did with the project. It looks great. Keep up the good work.
Nice job!
Very very good. 🌾
That's an awesome job! I do think the the guard is upside down but nice
Thank you! Yes, you right. It was my the fourth or fifth restoration of the knife. I'm trying to learn.
@@ScrewsAndTools really great job though!
Красиво получилось!
Spasibo!
Красиво! но ручку лучше делать площе для контроля направления лезвия.
Another great video, please keep up the great work. Your friend, Tony!
Thank you!!
Cuando el reto está tomado, los problemas se hacen presentes, te felicito por afrontarlos, buen trabajo, saludos desde Guadalajara, México.
¡Gracias por su atención!
I actually was glad to see all the boo boos.I've done them all and then some.I now use some diamond impregnated metal discs for my dremel. not as thin but they don't break. You can wear them out over time,but they just don't break.When you need to make a slot, you can start it with the diamond discs, or drill more holes closer together.I'm sure you'll learn all the tricks as mistakes are often the best teacher.What you're calling a bolster I would call a guard, and I think I"d have gone with brass since the blade is so polished.I am of the opinion that this knife was salvaged from a longer sword.Normally the fuller won't extend that far into the tang. and it seems to be a factory fuller, not something done by hand in a small workshop.
Not in love with this handle either. Seems too rounded and looks like it would twist in you hand, and it's just not right for the blade.
Thank you for useful advice!
Nice. The screw that fixes the handle is a novelty.
Thanks for attention!
Awesome informational educational video experience Y'alls
Судя по положению гарды, исполнение сотворено редкостным рукожопом....
That's a serious chopper! Nice work!
Thank you!
Хороший холодняк сделал.
Гарда потолще просится, между гардой и ручкой проставка была бы хороша..лезвие ок! А вот рукоятка неудобная будет, толстая в обхвате и неанатомическая...я б доточил....а так молодец! Возился долго, клинок вывел нормально.
Так и рукоятка вверх уходит, там где она должна вровень с обухом быть
Ты гарду не той стороной поставил.Это так настораживает.....
Я думаю это сделано для хвата режущей кромкой к себе, как на нр 40
@@officialunofficial614 По типу (ножа развечика)
рукоять не удобная если на рубку.... а с таким лезвием . походу )))
очень много труда!! like
Spasiba!
Lindo quedo lo quiero
It,s very good work!
Thank you!