ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Showing how to use a better esc but keep your stock 4ws setup with the stock AX24 transmitter.
Furitek Lizard Pro ESC found here
bit.ly/39jhrtc
Don’t forget 2fmrc at checkout for discounts at most of your favorite shops!!
HELP SUPPORT the channel by clicking my affiliate links below and then shopping at no extra cost to you!
Thanks for any help!
AFFILIATE LINKS BELOW
Horizon Hobby affiliate link
bit.ly/3eXihxY
Amainhobbies affiliate link
bit.ly/3CurIyF
FairRc affiliate link here
shrsl.com/3qxuc
FMS Affiliate link here
www.fmshobby.c...
Amazon affiliate link
amzn.to/3I4tQzI
RCAWD affiliate link here
rcawd.com/?ref...
Other DISCOUNT CODES BELOW
FMS discount code is 2fmrc
$10 discount is only applicable to the purchase of complete all vehicles and accessories, and can only be used when the amount is over $50
Injora Discount code is 2fmrc05 for 5% off
MofoRC discount code is 2fmrc
Fullsendrc discount code is 2fmrc
RcAWD discount code is 2fmrcawd5 for 5% off
Micro Komodo with mount for Trx4m here
furitek.com/pr...
Furitek stinger combo for TRX4M here
furitek.com/pr...
Furitek lizard ultimate here
furitek.com/se...
Order from FMS site and use 2FMRC discount code $10 off complete truck purchase here
www.fmshobby.c...
Extended links for the fcx24 found here
Link kit available here
www.ebay.com/i...
Contact me at 2fastmattracing@gmail.com
Purchase PARTS for the Fcx24 or rtr and help support the channel here!
shrsl.com/3la45
FCX24 Portal Gears included in this set
shrsl.com/3la70
FCX24 at amainhobbies here!!!
bit.ly/3yoLwRL
Fcx24 on amazon here!
amzn.to/3nDSCfb
High clearance links used found here
amzn.to/3NfOJaj
RC4WD Stamped steel Wheels used found here
bit.ly/3ntbRbc
RC4WD Scramblers found here
bit.ly/3FT3GgA
Other upgrades found here
Injora brass wheel rings found here
amzn.to/3zVGWM1
Wheel hex extenders used found here
amzn.to/3Oh8FLy
Stock Scx24 driveshaft (long) used for rear
amzn.to/3ndGhOk
FMS FCX24 available here in yellow
amzn.to/39OSMwU
FMS FCX24 available here in blue
amzn.to/3HHAHgJ
FMS FCX24 available here in red
amzn.to/3Oyjvwd
TOOLS I USE FOUND HERE
T-handle wheel wrench I use here
bit.ly/3qst079
WORK MAT I USE FOUND HERE
amzn.to/39gcXUb
MIP .050 hex found here
bit.ly/3xOvi45
MY FAVORITE TIRES BELOW
Injora 64mm Hyrax
amzn.to/3fmOShr
Power Hobby Trail Warriors found here
www.powerhobby...
Rc4wd Scramblers
bit.ly/3FT3GgA
MY FAVORITE ELECTRONICS BELOW
My favorite SERVO for the price (agfrc)
amzn.to/3xJbb7r
Another great BUDGET servo here (Emax)
bit.ly/2SjZXUx
My favorite ESC found here
bit.ly/39jhrtc
My favorite BRUSHLESS motor here
bit.ly/3MIMEU3
My favorite BRUSHED motor here
www.ebay.com/i...
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~
Good call on axial part. This will drive up additional sales for them
Furitek for the WIN...
DUDE!!!! I've been asking on the forums for a while about the high pitched whine... ...and everybody always says you have to go with a brushless motor... buuuuut you just showed a different way... ...and its AWESOME thank you!!!
That high pitched whine/squealing really makes it less enjoyable!!!
Thank you sir!!!
Hah! Glad it helped ya out. I absolutely hate that whine also!
Great video, thanks again for all you do for the RC world - Peace!
Wow great video man really appreciate all you do for the community
Bloody brilliant this morning I was wondering how to do just that. And now I know. Thank you very much friggin wizard 🤘🤘🤘🧙🏻
Really impressed with the slow crawl thanks for the video 🤘✌️
Great upgrade and instruction. Thanks for the presentation
Thanks for the informational video! Good to see it works, and keeps the simple to use 4WS function.
sure you figured it out by now but the micro komodo motor with the scx24 mount hits the lower link and the bottom of the battery tray. Furitek should have a mount out soon for it.
I just got the complete Furitek kit for the ax24 in yesterday. I haven’t put a micro Komodo in one yet. Just the mofo pancake and mini Komodo.
Great video
Great tip👍
Awesome good to know, appreciate you sharing I haven’t got one yet but I am planning on it
always love your videos and always know if i have a question about something or an idea, sure enough you'll have a video for it!
You should’ve heard me chuckling when you ran the Furitek esc with NO FAX Machine sound!
Great info and video Matt , peace ✌️ brother
NICE...
Killer Combo
Another informative video mate, do you have a link for the battery, or do a battery/electrics video.😀
Thanks for this! I see your link for the Lizard Pro. Are there any additional cables/adapters I need to run the ESC in my stock AX24?
Sweet 😎
Great vid! Great info, thanks! My AX24 will be here tomorrow 🤘🤘 New SUBSCRIBER here! 🤜💥🤛
Really appreciated the sub! Let me know how you like the AX24!
@@2fmrc will do! My first mini crawler… can’t wait! 😎
Great thank you!!!
I saw the Mofo guys toss an 030 Torque Beast on and got similar results. I wonder what you'd get with both.
Was just thinking the same thing 😎😎😎😎😎😎😼😼😼😼😼😼
@@oliverruelas1562 Slow crawl like "Sir, there IS a time limit on these trials."
I may have to try it. Got a few of those in the bin.
So what’s the secret sauce that the Furitek ESCs have? Is there really some big secret they have that enables good slow crawl and no whine, or is it just that OEMs choose cheaper units?
Pretty much just axial chooses a junk esc lol. The fcx24,rock van,t hunter etc are all much better lol
Did you have problems with the stock motor surging with the Lizard?
keep it up broh! love it
does flysky make any micro receivers for that would work good for these 1/24s?
I use these with the flysky gt5. Work great!
www.ebay.com/itm/224471092093?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=vktv0ea_Q4e&sssrc=2349624&ssuid=i7plO3GMQpW&var=&widget_ver=artemis&media=COPY
I wonder what would happen to those servos if you turned them up to 6.5v? 🤔
I’ll find out & let ya know. Gonna replace them anyway 🤷🏻♂️
Have you figured out how to trim the rear servo? This is a big flaw in the stock esc/receiver because it does not seem possible.After swapping out the servos to Emax the rear end is not quit straight.
No I don’t think there is a good way to adjust it. I may make an adjustable link for the steering to show how we can maybe straighten it out that way.
@@2fmrc Excellent
Does this lizard come with the Bluetooth to phone. Also will the micro Komodo fit in this rig? Thanks
who makes that battery???
What 050 motor do you recommend for my scx24?
Probably the holmes 55t. I think that’s what I’m gonna slap in my budget build ax
Can I do this with the tegu or normal lizard?
Yes! Should work the same
Where did you get the Herbie body
Team Blue Groove 🤘
teambluegroove.com/products/1-24-trail-beetle-bug-lexan-body-clear
any ideas on adjusting rear steering trim? after switching to emax servos my rear end was just a lil off. Either tooth I put the horn on made it off to one side or the other. I actually heated a stock link and stretched to get by for now, which works. I would love to run this on a setup I can adjust the trim front and rear but unfortunately I have no clue what that setup would be. Thanks for anybody's ideas and help. I myself wish somebody would make an adjustable steering servo linkage, problem fixed.
I may make an adjustable link to show how we can adjust it that way. That’s a big issue with the stock system.
@@2fmrc we need adjustable links all the way around really. Would be nice to have adjustable steering link and suspension links. Squeezing out an extra 5-10mm on those suspension links could be epic in my opinion.
@@2fmrc I’d like to play with stretching the rear on the ax24. I put axials brass knuckles and weights on the front and then +4 treal brass hex extensions on all four corners. Went to Treals 4 link servo trays front and rear with emax servos and just today put proline Mickey Thompson Baja x’s on there. With the proline rim it sets nice and man it gets around. Just enough weight in the right places, servos and those slightly smaller yet aggressive wheels turned it into what it shoulda been outta the box however just like any scx24, it’s become routine to throw out the servos and motor’s immediately anyways. I’ve been finding it fun to try to run less and less weight and running the stock servos and motors like it’s a challenge lol.
Herbie!
80 bucks
Yeah no kidding! Another reason axial should’ve gave us better electronics 😆 I’d probably use the iguana esc if I planned to leave this setup. At least it’s $20 cheaper lol
First
Last and lastest here yay omg
Another great vid