ฝัง
- เผยแพร่เมื่อ 29 ม.ค. 2023
- Modding the shocks on the new AX24 and making it climb much better straight out of the box!
Springs I used found here
US $1.83 46％ Off | 20PCS 0.2*2 2.5 3*5-50mm Spring Steel Small Compression Release Mechanical Return Spring Pressure Spring OD 2mm 2.5mm 3mm
a.aliexpress.com/_mr1OVPM
Axial AX24 available here
bit.ly/3HwOYyi
Proline Super Swampers available here
bit.ly/3v91Rrd
Proline Trenchers available here
bit.ly/4074yI8
Hard Park Dementor found here
hardparkrc.com/collections/fr...
Work mat found here
cowrc.com/
OGRC Servo found here
amzn.to/3izL2mIp
Agfrc aluminum servo horn found here
amzn.to/3XclRWn
OGRC Comp Pin tires found here
www.amazon.com/dp/B0BNVFCCBX/...
Furitek Lizard Pro (without case shown) found here
bit.ly/3QZrvIn
Furitek Mini Komodo motor & stellar trans here
www.amainhobbies.com/furitek-...
Small 3s batteries available here
palmbeachbots.com/search?q=li...
Fcx24 Front Portal axles found here
shrsl.com/3ma33
FCX24 Rear Portal Axles found here
shrsl.com/3ma3h
Don’t forget 2fmrc at checkout for discounts at most of your favorite shops!!
HELP SUPPORT the channel by clicking my affiliate links below and then shopping at no extra cost to you!
Thanks for any help!
AFFILIATE LINKS BELOW
Horizon Hobby affiliate link
bit.ly/3eXihxY
Amainhobbies affiliate link
bit.ly/3CurIyF
FairRc affiliate link here
shrsl.com/3qxuc
FMS Affiliate link here
www.fmshobby.com/jsVeIxtdZHBb...
Amazon affiliate link
amzn.to/3aY2lK7
RCAWD affiliate link here
rcawd.com/?ref=FaSRjm2T
Other DISCOUNT CODES BELOW
FMS discount code is 2fmrc
$10 discount is only applicable to the purchase of complete all vehicles and accessories, and can only be used when the amount is over $50
Injora Discount code is 2fmrc05 for 5% off
MofoRC discount code is 2fmrc
Fullsendrc discount code is 2fmrc
RcAWD discount code is 2fmrcawd5 for 5% off
Micro Komodo with mount for Trx4m here
furitek.com/products/fur-2259
Furitek stinger combo for TRX4M here
furitek.com/products/furitek-...
Furitek lizard ultimate here
furitek.com/search?q=lizard+u...
Order from FMS site and use 2FMRC discount code $10 off complete truck purchase here
www.fmshobby.com/i0Io4gJ_t9ISDY
Extended links for the fcx24 found here
Link kit available here
www.ebay.com/itm/334484497358...
Contact me at 2fastmattracing@gmail.com
Purchase PARTS for the Fcx24 or rtr and help support the channel here!
shrsl.com/3la45
FCX24 Portal Gears included in this set
shrsl.com/3la70
FCX24 at amainhobbies here!!!
bit.ly/3yoLwRL
Fcx24 on amazon here!
amzn.to/3nDSCfb
High clearance links used found here
amzn.to/3NfOJaj
RC4WD Stamped steel Wheels used found here
bit.ly/3ntbRbc
RC4WD Scramblers found here
bit.ly/3FT3GgA
Other upgrades found here
Injora brass wheel rings found here
amzn.to/3zVGWM1
Wheel hex extenders used found here
amzn.to/3Oh8FLy
Stock Scx24 driveshaft (long) used for rear
amzn.to/3ndGhOk
FMS FCX24 available here in yellow
amzn.to/39OSMwU
FMS FCX24 available here in blue
amzn.to/3HHAHgJ
FMS FCX24 available here in red
amzn.to/3Oyjvwd
TOOLS I USE FOUND HERE
T-handle wheel wrench I use here
bit.ly/3qst079
WORK MAT I USE FOUND HERE
amzn.to/39gcXUb
MIP .050 hex found here
bit.ly/3xOvi45
MY FAVORITE TIRES BELOW
Injora 64mm Hyrax
amzn.to/3fmOShr
Power Hobby Trail Warriors found here
www.powerhobby.com/powerhobby...
Rc4wd Scramblers
bit.ly/3FT3GgA
MY FAVORITE ELECTRONICS BELOW
My favorite SERVO for the price (agfrc)
amzn.to/3xJbb7r
Another great BUDGET servo here (Emax)
bit.ly/2SjZXUx
My favorite ESC found here
bit.ly/39jhrtc
My favorite BRUSHLESS motor here
bit.ly/3MIMEU3
My favorite BRUSHED motor here
www.ebay.com/itm/164700601353...
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~ - บันเทิง
Internal spings! Brilliant. I bought a set of the AX24 shocks today to run my scx24 ultra4 printed build. I like the idea of not having rubber bands as my limiting straps.
Yeah I’m not a big fan of the rubber bands either. Just don’t like the look. These shocks are really good with the internal springs. I’ll probably use them on a few builds!
Great video. Just picked mine up today from HobbyTown, Arlington, TX.
I just got my ax24 in the mail yesterday and came across your channel subbed straight away. I’m new to all this and you’re a great teacher happy holidays and stay safe.
Thanks heaps 🎄🎅🏼
Nice upgrade. Mine will be here Saturday
Hey.. genius mod .. never would have thought about a reversed set up like that 👍
That’s awesome shock mod, Yep Matt we’re here watching. I do like the new AX 24 but I just ordered the trail hunter can’t wait to get it and I did order the oil shocks for it
The trail hunter is awesome!
I just got one and I took all the springs of the shocks and added alittle greases to the shocks works freaking awesome
All I did to mine were weighted treal wheels, +5 hub extensions, and 58mm rear high clearance links with 39mm upper links and it’s a ripper
I tried your mod and it worked great. I went from brass and stock shocks at 50 degrees to 59 with your mod. I took 2 springs and cut them in half and did it to my modded scx24 and went from 59 to 62.
Nice! Glad it worked so well for you. That’s killer!
Love my ax24!
Great vidoes man keep em coming
Thanks! Really appreciate it!
Cool video 👍😎
Team Yokomo built one 12 years ago similar AX24 but the Yokomo version came with high links..I do like your droop spring mode to keep crawler down…
Good old pen spring mod. Works great. Keeps the front end from unloading for better climbing.👍🏼
Yep! Been doing it on the 1/10s forever lol
@@2fmrc Man I had this little ordered then cancelled. Figured I I have enough minis already.May have to put it on order again. Looks fun.
Genius!!! 😊👍
Just looked at those brass knuckles today. Got the skid plate and new emax servos.
There are much cheaper options for the knuckles honestly.
@2FM RC I have a spare set of the treal ones so I will most likely just get another set for the rear.
If I had some place that I could Comp I would probably grab one of these to have a Class 1 24th scale to complement my class 2 & 3 builds.
I guess I really don't know SORRCA rules so I don't know if a 4WS is a class 1, so now I am wondering if anyone will downgrade these to a 2WS.
@@GrimJerr i actually may make one 2ws. I don’t use the 4ws that often really.
What I’m wondering is if you have the same travel great video thank you
@@shawnrichardson118 I appreciate it! You lose the amount of travel that the spring fully compressed takes up so you lose a bit of travel. Not too noticeable since these trucks have so much travel anyway. I usually prefer a bit less flex so it worked out well for me.
Bought a bunch of upgrades and some links and found our instantly that the link setups are all different
I wonder how easy/ hard it will be to get one to do my sidehilling line.
Looking at buying those springs. Not sure what length to get. Could you help me out
Which springs do actually recommend from that aliexpress link? There are a few options
I just got my springs in finally for this mod and they don’t work like yours. The shock body is tapered at the bottom and the spring compresses to the bottom and stays there. Unfortunately AX build has been a nightmare from day one lol. Everything I’ve done or tried to do to it has been a major pain in the a$$
I like the idea. I'm not a fan of the rubber band . thanks for the video
Thanks for the video, do you think that the flat skid of the ax24 would fit other aftermarket scx24 rails ?
Where would u mount the upper links? Ax skids only mount 2 lower links. Upper links mount higher up.
I did use a brass Scx24 on my AX24 build. It doesn’t line up perfectly but it does work great. That’s when I learned the diff.
What do you think about the hbx devastator? Is it any good or is it trash? Would you ever do a review on it? Would like to see it on one of your courses
I need to get one. I just never picked one of those up. Not sure why lol
What size spring did you use?
Could you run shock oil along w the spring? also what spring is this. the link has different sizes
.2x3mmx20mm is the spring I used. Some people will put a dab of slime or grease in the stock shocks to help them not be so bouncy but they won’t hold oil. They have no seals in them.
@@2fmrc okay thank you bro!
I like it but I'm thinking different body
Already working on that 🤘
is there a non-sketchy place to get the springs other than Ali Express?
Not that I know of lol. Sometimes rare springs and stuff are on eBay
what are the best mini crawler tire
Kinda depends what size you’re looking for. The new proline baja pro x are great. LGRP swamp kings,ogrc pin tires,proline trenchers,Injora 62mm. Those are all really good options imo
What is the name of the tool you used to hold the shock?
Just a shock shaft tool. Works great for shocks and rod ends etc. A must have on larger scale trucks for sure!
bit.ly/3JSNqPg
So is there a specific pen I should be looking for? Can I order these springs online?
Yeah ordering them is the best bet. It’s hard to find the perfect spring in the pens. I’ve found some for other shocks but it’s kinda tough to get the perfect fit.
@@2fmrc by chance do you have a source for ordering?
Never mind. I’m an idiot. You already have a link. Anything in the states by chance?
Glad to see you got them to perform. I still think the body is ugly, the wheels look so big it looks like a toy, and it bobbles like a bobble head doll. I don’t care how good something performs if it doesn’t look good doing it. 😁I’d rather put FWS on a better looking rig and save some cash. It offers not real value to me.
Was just thinking “would be dope if someone dropped a scx24 video”
Haha! Perfect timing then!
One video your bad mouthing these rigs and then you have 3 of them, this is wild.
To be fair I always order at least 2 of everything 1/24. Much easier for testing. I just ended up with the other one because I wanted to get started on videos a bit sooner. I am enjoying them though. Like I’ve told others…. I wasn’t really excited about them in my “pre-run thoughts” video but since receiving mine I’m actually enjoying them. Maybe it’s just the newest toy but I’m having fun seeing what I can do with them! I don’t think I should lie and hide what I’m enjoying just to stick with the thoughts I had on something before I even had it in hand. Should i? Is that what people really want? So I let people know I’m enjoying it and get to modding lol
I think he did what most true CC’s do. You buy them to make content … and sometimes something surprises you. Personally I still hate them but if I were a CC I’d probably have done the same. lol
@@bladeaddison3189 sorry what is a CC, no comprendo lol.
@@WoodsUnknown Content Creators 😊
@@bladeaddison3189 thanks first time i seen that one
I'm still wondering why they released something that is inferior to their own scx
Yeah the chassis and electronics of it are a mystery to me. Chassis layout is outdated and I can even deal with that but the electronics I feel like they went with the cheapest esc they could do 4ws with easily. I’m enjoying them but feel like they should’ve did a lot of things differently.
Axial isn’t stupid … they know it’s an easy cash grab on a scale that’s hot right now. I don’t like it, but I get why they did it. Playing off the nostalgia of their extremely loyal fan base.
I don’t think losing a little flex is a bad thing. 😂
Definitely not on this thing!
It's not bad, you could just buy flex blades!
@@SNOWPLOW401 absolutely not lol. I can’t stand how unpredictable those things are. They unload at the worst time and loop you out.
@@2fmrc True, I ran them on my scx24 just got 2 ax24's, one for my birthday,and another one on my birthday just to sit in a box.
@@2fmrcyes my bronco was like that unloading at the wrong times with the hr telo shocks
I'm not mad at ya - it's just not for me.
Comment for the algorithm. Cheers. 🍻
I appreciate it! I really didn’t think it was for me either but the more I mess with it the more I’m enjoying it. Kinda fun to see what I can make out of it. It’s the newest toy lol. That new will wear off eventually 🤘
Would have been my 1st Mod, way too sprung and bouncy out of box
You forgot to say and 1 to give away lol hint hint
Not gonna lie I thought that was what he was gonna say too. 😂
Haha! I think axial said they’d send that one straight on over 😆
@@2fmrc … hahaha … I see what ya did there! 🤣
Sorry man I love your vids, but can't stand the new scx24
Hey I can’t blame ya. I wasn’t a fan at all until I got it. Now I just wanna see what I can do with it lol
@@2fmrc you coming with a new video for the t hunter soon, can't wait for that🙂👍
" " oh yeah guys, I don't like these they are fail yada yada " ".... Has 3 of them already??? Ok bud
I should probably not buy anything new and just stop making videos on new stuff entirely. Can’t buy just one when you plan to compare mods unless you wanna be like a lot of the others out there that just say a mod works great and you’re supposed to take their word for it. I like to show how each mod works vs stock so it’s much easier to have multiple trucks. Also if you watched my last video on them you’d hear that I actually kinda like them after getting mine. So if my opinion flips on something should I just lie about it and go on? I shouldn’t actually tell people how I feel about anything? Once I make a “pre run thoughts”video on it that should just be the only opinion I have on it? Pretend that I never make a mistake or change my mind? Or should I let my opinion on something be known and keep messing with what I’m enjoying? Maybe I should’ve asked you what to buy? Idk? What’s the answer here BUD? I had almost quit running my scx24s completely until this came out and it’s kinda brought me back to them. I’m kinda thankful for that honestly. Fact is it’s the new thing and we all love new toys!
@@2fmrc … good points. As a CC I think you did the right thing by comparing them. I get it.