Hi, am I able to flash the engine control unit to factory settings in ODIS, or how? At Seat Ateca DFFA someone did chiptuning and the vehicle constantly regenerates DPF. I also have a GECO, but I don't know how to do it. Thank you
There is an option. You can click "No keys programming" and system will get VIN and other info from other modules, just you need one working key to ignition ON. If you choose "Program Key" option, you will need to have all keys present to re-program them.
Hi, I m going to upgrade the cluster passat b7 to my passat 3C but I need make correction kms to my new cluster. I have the odis software but I don't now how make the correction. Do you now? Thanks
Hi! I am pretty sure you cannot retrofit old cluster to another car because of security issues. If you install a new cluster, still you must unlock security protection feature, which could be done online only.
@@vtecvtec6146 When doing new cluster programming, there is option to input Mileage on time only. If you retrofit old cluster, you cannot change Mileage to new. VAG allows to change Mileage till 200km on cluster only.
@@autoscan777 My exact question is : When you plug a car with ODIS, does ODIS give you automaticaly all Action code available for this car ? or you have to find by your self Action in TPI in exemple ?
@@gdmdg When you connect to the car, ODIS identifies VIN, and next asks if you wish Guides Faults Search or not (it is marked ON on default). In the right side of the menu you can see all functions list, like self-test or Guides functions, Admin. But my advise never use Guides search as it is frustrated.
@@autoscan777 Does not work like that... Why are you misleading people? In order to be able to use online flashing you must a) Obtain Org-ID from national dealer, b) Pay subscription for GEKO, c) setup VPN connections to factory, d) pay $10 for each hourly diagnostic session or pay $2500 for a full year.... Been there done that
@@charmand79 Yes, you are right, might be not working in your country, but NOT in other countries! We sell a lot of Mangoost Pro VW and Cardaq Plus, so we know it well. VAG policy differs country by country.
En cuanto sale la licencia
Hi, am I able to flash the engine control unit to factory settings in ODIS, or how? At Seat Ateca DFFA someone did chiptuning and the vehicle constantly regenerates DPF. I also have a GECO, but I don't know how to do it. Thank you
Hi! Yes you can dco module flash programming with ODIS if you have access to seat portal.
do we need an online account to do programming, coding or flashing procedures and, how did you know the action code what is it to be ?
You should arrange supscription via OEM web site: erwin.volkswagen.de/
So after finishing the reflash, Do u have to re-code the spare keys also? Thanks
There is an option. You can click "No keys programming" and system will get VIN and other info from other modules, just you need one working key to ignition ON. If you choose "Program Key" option, you will need to have all keys present to re-program them.
@@autoscan777 Aha,,, Cool, Thanks a lot.
Hi what if the cooling fan is running?
It is normal
How to you program level sensor module with the odil software?
Yes, no problems.
Hi, I m going to upgrade the cluster passat b7 to my passat 3C but I need make correction kms to my new cluster. I have the odis software but I don't now how make the correction. Do you now? Thanks
Hi! I am pretty sure you cannot retrofit old cluster to another car because of security issues. If you install a new cluster, still you must unlock security protection feature, which could be done online only.
@@autoscan777 , i now with odis we can make mileage correction. Are very information in the net odis can do it, but I can't find how to do
@@vtecvtec6146 When doing new cluster programming, there is option to input Mileage on time only. If you retrofit old cluster, you cannot change Mileage to new. VAG allows to change Mileage till 200km on cluster only.
Where I can get action codes?
Have odis, Geko, and erwin access...
How to update one module?
How to update all ecus?
Hi, I feel you have apply to Geko tech support....
HI stan, where i can find current action code for a vehicule ?
Hi! You should have an access to VAG coding data base or on-libe subscription for ODIS
@@autoscan777 hi ! I have a complete access online. Odis give list of action about current scanned véhicule ?
@@gdmdg Do you mean "Guided Diagnostics"? Yes!
@@autoscan777 My exact question is : When you plug a car with ODIS, does ODIS give you automaticaly all Action code available for this car ? or you have to find by your self Action in TPI in exemple ?
@@gdmdg When you connect to the car, ODIS identifies VIN, and next asks if you wish Guides Faults Search or not (it is marked ON on default). In the right side of the menu you can see all functions list, like self-test or Guides functions, Admin. But my advise never use Guides search as it is frustrated.
Thanks for the video. Nicely done.
Can the VAS5054A do the same?
Can i reflash (not update) a module offline?
Hello. VAS5054 is very old tool. Reflash could be done only online.
You can use ODIS with any J2534 device or OEM tool. All programming is done online. It is VAG policy.
Hi, nice video. How to get online account for ODIS?
Hi, please, sign up to VAG techline website.
how can i get the odis online license?
Simply go to erwin.volkswagen.de/ and register.
@@autoscan777 Does not work like that... Why are you misleading people? In order to be able to use online flashing you must a) Obtain Org-ID from national dealer, b) Pay subscription for GEKO, c) setup VPN connections to factory, d) pay $10 for each hourly diagnostic session or pay $2500 for a full year.... Been there done that
@@charmand79 Yes, you are right, might be not working in your country, but NOT in other countries! We sell a lot of Mangoost Pro VW and Cardaq Plus, so we know it well. VAG policy differs country by country.
@@autoscan777 Actually I’m from India how get ODIS online account?