How NOT to Improve the EXHAUST on a BMW 1250GS and 1200GS
ฝัง
- เผยแพร่เมื่อ 27 ก.ย. 2024
- A lot of riders consider the exhaust sound of the BMW R1250GS and the R1200GS to be a little....boring. Apart from spending a lot of money on aftermarket motorcycle exhausts, is there another way?
------------------------------------------------------------------------
#motorcycle #exhaust #bmw
------------------------------------------------------------------------
Join us on Twitter: / ridelwh
Join us on Instagram: / ridelwh
Join us on Facebook: / ridelwh
Become a Patreon: / longwayhome
For business inquires: calin.lwh@gmail.com
** All additional video segments contained in the Thumbnails and B-roll segments are used in strict compliance with the appropriate permissions and licenses required from videoblocks.com in accordance with the TH-cam Partner Program, Community guidelines & TH-cam terms of service.
What's your favorite aftermarket exhaust?
Usually the cheapest of the selection of reputable manufacturers, not Aliexpress specials. 😉
Currently it's Arrow and V&H.
keep doing these type of DIY project videos please
I’m a big Yoshimura exhaust fan ran them on my Hayabusa and all my GSXRs but I haven’t tried one on the R1259GS yet.
I really in joy your videos and I think your camera set up worked well.
Recently rode an R9T with a full AKRA system. Sounded OK to me.
Same day rode a bone stocck 2014 R1200GS, factory system is OK too.
I would get rid of the factory can just for the weight savings and nothing else. Loud systems get old quick on long runs at highway speeds.
I have a 2003 SV1000N with D&D "mufflers" BUT there's no such thing as muffling going on when ALL you can see is a straight pipe perforated core from start to end. Sounds awesome tho. 🤘🏻😈
How bored must you be to do this ?
How bored must I be to watch it ?
Great as always, keep it up !!🇿🇦
Ah, the deep joy of BMW ownership! The "HOW MUCH???" Factor at play again. Loved the absolute bodgery at play in this vid. Home spannering at its very best. Poor Dave, weeping in the corner. Great multi camera editing there bru.
Thanks Phil! Dave was hiding. He hates loud noises :)))
I didn't realise you were starting a comedy channel!! 😂
I replaced my loud but legal end can on my Honda after about 18 months with the stock end can. Loud can was fine on short trips but drove me mad when touring.
When you say you don't normally wear pants, I hope you mean trousers. You Americans! 😁
I use my K25 without the muffler and the engine, acceleration and driving changes a lot. Cheers from Costa Rica and hope to see more mods and get some new ideas.
"Dave's not here man ?" Another..and even better video using the 3 camera technique..(there's 3 GPs on my Scout).
BMW, along with Sena, may have Dunning-Kruger Syndrome in its customer comments dept..that would answer your rhetorical question of "why.."
A hack/trick is to cut a couple of slots in the pipe ends and tighten with a hose (spiral screw w/slotted band) clamp.
In the video, I believe I saw, (definitly saw after review) when your Cap Mount GP looked down the pipe (@ the 6:26 timestamp) after removing the boat anchor, the illuminated floor (?) I'll review later after I put pants on. Oh the conundrum of pants v. video views IS perplexing. The Sport Can sounded fantastic the second I heard it ! Good editing, and only your first try at it, as well. Stay well..we're all in this together.
mark foster Cheech and Chong reference. Takes me back 👍🏻
@@bav114 Thanks, Dave ! You speak better English than I could EVER speak Roumanian.
Yeah, i hear a lot from my friend GS exhaust, nothing from them interesting me....event when they removed db killer. Stay on stock is better!
is this true? The exhaust valve assists braking and engine braking. If you cancel, you will lose braking power at some speeds.
Every time I go down that road, I end up realising that just leaving the exhaust on, is good enough. The aftermarket exhausts are so expensive - the only one that would be interesting is the Yoshimura but living in South Africa, these are also super expensive. My pet peeve: if you want me to advertise your brand, pay me - I don't want to have your brand name in huge letters on the side!
Seems like a tutorial on how to be happy with your stock exhaust :P
A rack for some mini-sidewinder missiles would liven things up - bit of a blast. No explosives just paint bomb bullets.
I love the idea. 😉
Full system akrapovic hp exhaust on my r1200 gs lc 2015 it sounds like a monster every where where i drive people looking what the hell is coming
Love your videos
That’s without the cat, correct?
Long Way Home yes correct my friend,
I want to sell my bmw 1200 gs lc 2015 triple black factory lowered and buying my self a honda xadv 750.
Make sure you ride it for a while before :)
Long Way Home definitely will ride it in this days, do you think honda will come with new xadv 750 with touch display and dynamic esa on it and more power
Dominator HP, I have 3 of them on all bikes and are certified and nice sound(db killer can be removed after registrazion of needed)
Awesome. Just found you on TH-cam. Love the videos I’ve watched of yours. SA flag??? With some South African accent there mixed with a European accent, right?
I often wondered if you were a Saffer because of your accent. Now I know, having seen the flag on your top box. Nice to see how far we've spread and how you seem to be enjoying yourself there. I'm sort of planning a European trip and will make a point of riding Romania and looking you up when I do. Lekker, Boet.
I lived in SA for 15 years, but I was born here. Come for a beer and a braai :D
@@LongWayHome I will for sure but would like you to show me some local rides too. Your area looks amazing for riding. I have a 2015 GSA L/C and am trying to figure out whether to send it over or buy/rent a bike. You have any opinions?
@@LongWayHome Oh, one other thing. I met up with a French guy here who gutted his standard pipe on his GSA. Now THAT sounded good. Perhaps your next project?
Good craic , the standard can doesn't sound that bad , entertainment value is worth the experiment .
Sounds just like my brush cutter!! Lot of fun viewing mate. Stay safe.
LWH you are saving my sanity during 2nd lock down
I removed my GS -OEM exhaust to fit my (Givi) pannier frame. I nearly put my back out, it weighs about 2 Tonnes 😂😂. Great video, thank you.
I enjoy seeing that little South African flag sticker. Are you South African or have you just visited this beautiful country?
Yoshimura cans have a deep throb, very much to my liking. But I have an Akra, because that came with the bike I bought. Contrary to the common belief, these after-market cans are not used to make the exhaust note louder, but deeper. More throaty, more “masculine”. Original cans sound like popcorn machines more than not
The Polish De-cat pipes are available On eBay here in the US for a fairly cheap price.
Nice take, it's definitely worth it to get the same muffler road legal, sounds great, great engine just had to be heard cool.
Find a 1978 Supertrapp and you can then adjust using discs..it will be exciting to know how many it takes
Nice video quality, but why there is so much black smoke coming out when you use the new can?
I prefer the sound of the little can . . . but what feedback do you get from a pillion?
I know I might be a little late to throw in my idea here but... as almost 2 years have past since you uploaded this video.
Instead of upgrading the muffler... Have you thought of removing the CAT and junction box under the bike and have a Y pipe made up? BUT remember to keep the existing 'Flapper" valve in your configuration.
Not sure what this will do on the Beemer but it makes the Ducati Multistrada sound awesome while keeping the original looks and at a very minimal cost.
Have a great day.
From the Land of OZ
Get the Remus one, its cheaper than the Acro.
Make sure its baffle removable type though, euro 5 ones are sealed.
No-Can-Do mate. I don't know what your day job is, if I were you I wouldn't give it up just yet. Thanks for giving us a good laugh!
That was fun! Cheers.
Tradionally if you change muffler for sound gain you will loose a little bottom end torque plus chew a bit more fuel. This cannot be avoided as you are changing air flow balance & definately the standard computer will not compensate.
But overall a little more sound may be worth it.
is gs310 removable muffler too?
Sounds like a very large chainsaw when revs held to me. I do like how the smaller slip-on shows the wheels lack of swing-arm right side. I have a r1200r and want to fit a slip-on so i'm looking around.
Probably the best video i have watched since the zombie virus took away our freedom to ride. But where was Dave? Clearly a two man precision engineering project.
Couldn’t even find him tondonthe cleanup. He’s been hiding around the hiuse since the Lays delivery came.
The shorty sounds sweet and probably throws a lot of heat on pannier. Sorry just be happy with you have. If you need a good note get a Harley it's ok to own 2 bikes. But A for effort.
" 14:14" That exhaust Dave,........Dave,....... come back...
Your "voluntary home arrest" is taking a toll.
You can be cheap, but no need to take it to the next level. Interesting video nonetheless.
How you doing dear friend?
Going mental. Lockdown ends in Romania on the 15th. Gonna ride for 24h straight :)
@@LongWayHome 😆😆😆 You clearly need it.
Just curious. Did you notice the oil being sprayed on your pannier rack when you revved up the after market exhaust
Only when I was editing :) Not oil though. Condensation with soot.
That was strangely satisfying :-)
Nice sound! Hope you do find a silencer on Amazon. Would be terrific.
Change the headers and a cheap silencer (fuel rear can) sounds much better ... keep up the vids
On a long trip, that would become old very fast.
What you need is some expending foam. : ) Magic stuff that is!
im impressed you can still sit like that lol
I kept smiling throughout the video😀
Put that thing back for sale on EBAY or Amazon, get "some" money back and buy a decent [used] exhaust OR new if you feel rich. Everything will be fine. 👌🏻🙂👍🏻
Can we see Dave again. I believe he was a stuff animal. Nice vid. Very entertaining.
A second hand exhaust from ebay, the best solution
People sell second hand exhausts?
Mr. LWH- A very wise rider once told me that everything you change on a motorcycle makes it worse.
Very interesting video and as always alot of fun.
Used a Black Widow on my gs1150. Lovely.
1200gs hayalimiz olan bi motor
People the more silent we are the better, or we will risk more roads closed for us.
I dig the video, well done!
Where did you get it, aliexpress?
Take a look at the Lextech Sp8!👍 good video !.
Have you tried with the panniers on.. It might just barbeque the panniers. 😅
De curiozitate, de unde pui benzina?
Petrol station....
@@LongWayHome Serios? Nici prin cap nu imi trecea ca benzina se pune la benzinarie? Am observat ca afuma rau motoreta, de asta eram curios de la care benziarie pui, ca sa o evit...
Dude, It sounds just like my Riding Lawn Mower!
Would be proud to ride my bike with it on
love ya work,, going out to attack my 1200 right now. Cheers.
Nice DIY experiment
Sounds best without exhaust :D
Stay with stock. It is heavy but sounds good.
About a REAL sound for our BMW R1250 GS Adventure.....Buy a horn from BMW Automotive. for. the 5 Series BMW's.. they are identical in size and connection, and what a difference in sound, OMG!! You will love it and it will keep you safer. Installation is sooooo simple. there are TH-cam vids showing that!
The cheap Sports end can dosent sound too bad. Almost like an old Ducati race bike.
I'm going to represent your motorcycle and sue you for cruel and unusual punishment 🏍️✌️🏍️
Sometimes less is more
i have owned german made toys and they don''t use the same diameter of any thing the rest of the world uses
BMW still rocks
Straight pipes FTW
Cool Video! Thanks :-)
As an ex BMW R1100S owner I can tell U that best result to improve the sound of a BMW boxer motorcycle is a catalytic box delet! This is a very old clip of my R1100S with a Remus Y-pipe catalytic box delet and a Remus Grand Prix end can.
th-cam.com/video/AglwA0Lt2a8/w-d-xo.html
Yoshimura sounds and looks as good…
That exhaust would lose you a lot of power probably
Anyone try a Leo Vince? Seems to be a reasonable price on eBay.
Remus and Akrapovic.
Rock on my freaky brother fuck factory. Why can thay not do it right with all that money an brains. I would keep that new one an cut up to make it right. 🛵🕺🏻💃🏽👙👀🛸
Spend some money on a good exhaust, you will get senor codes after a while with that tape job
It's not rocket sceince to know by fabricating a substitute for a collector you might want to consider the effect on backpressure...that's why anyone with some mechanical experience is going to re map for this alteration....thumbs down I am afraid but it was entertaining.
Wow, 52 cm pipe diameter is very big :D
No endcan FTW
LOVE IT
I fitted an end can made by "fuel" exhausts, fantastic sounding quality bit of kit, check out their website .!!!
52cm? And I thought you're a European! :D
mm. My bad.
@@LongWayHome No worries. It was a fun video - thanks for making it!
if you think you need to redesign something better than the engineers, just get HD
hahaha, the lockdown is getting to you, you are really bored. keep it up though, enjoy your content from South Africa
:) thanks boet!
Are you a south african
Go to "14:12" man, thats why Dave aint hear.........
Dude, your pills!!! :D
30 some bikes ago, I thought every motorcycle needed a loud pipe. Hell, I even put a Vance and Hines slip-on on my Audi 5000 in college 😂. My experience with attention getting exhausts have led me toward more quiet bikes. Especially the 1250GS when my wife is on the back... and wheelies on the CRF450L are nearly silent as far as the neighbors are concerned. The S1000RR is my loud bike and Ive got an Akropovic on that bike. Boy was it salty$$$ too 😖. Have you looked at any of the pipes on ebay? Ive seen some fairly priced offerings like one from Delkevic for $300 USD.
Does dave actually exist?
It’s more of a philosophical question.....
And the winner is?
None of the above.
It looks kak but it sounds lekker 🤙
There is a video showing how to shorten the baffles in the factory exhaust that sounds great
A bike thing is the channel
Y tho
And this is how you make a BMW 1201GS.
What?
Sounds like a chainsaw in the Canadian woods.
sounds like a weed wacker
My friend and I always used to refer to the sound as the "Cessna" flying overhead
th-cam.com/video/sn8TEPTZ5gY/w-d-xo.html