🎯 Key points for quick navigation: 00:00 *💻 Introduction to Power BI on Mac* - Power BI desktop is not natively supported on Mac, - Introduction to using UTM and Crystal Fetch to install Windows on Mac as a workaround. 02:16 *📂 Installing UTM and Downloading Windows ISO* - Process of downloading UTM, a virtual machine application, - Downloading the Windows ISO file using Crystal Fetch. 04:09 *⚙️ Setting Up the Virtual Machine* - Installing Windows on the UTM virtual machine, - Steps to configure the virtual machine settings and importing the Windows ISO. 11:06 *🚀 Installing Power BI on Windows via Mac* - Downloading and installing Power BI on the Windows virtual machine, - Ensuring smooth operation of Power BI alongside MacOS functionalities. 13:54 *📊 Conclusion and Additional Uses* - Power BI can run smoothly on Mac through virtualization, - Ability to run other Windows applications on Mac using a virtual environment. Made with HARPA AI
As a newbie to tech, this worked well, thank you! Couple of questions: 1.Once it's installed, can we delete the .iso file (5+ GB) which we downloaded or does it need to stay for everything to work? 2. If we want to 'uninstall' everything we just did and go back to getting the full memory of the macbook back , what are the steps to do that? Thanks in advance!
When I tried to run window 11, it shows a mapping table that you did not have on your video. So I totally get stuck at 7:06 and cannot move more. Please help me!
@@TheAnalystLens It did not work even after multiple attempts. I also tried to install windows 10 both x86 and x 64 still it did. not work. It is restarting and then asking to setup windows again.
Please read and reply to help me to get out of confusion. Will it work as smooth as in Windows laptop? If i install window 10/11 with help of UTM in MacBook Pro i7 16GB & 512GB.
@@TheAnalystLens hello This worked for me at the first time But then it suddenly stopped working ! Could you help me please? I get stuck on the shell and it does not start up ! I tried deleting everything and doing all steps again But it did not work Could you please help me ??
@@TheAnalystLens yes i still have the iso file, but is there is any performance difference between VMware fusion and UTM, i am using it only for running and developing Power BI reports. Also thank you so much for replying! :)
Hi! I'm also using UTM, but I'm facing an issue where I need to install Power BI in Windows within UTM. However, when I turn off UTM and later try to resume my work in Power BI, my previous progress is lost, and UTM reinitializes Windows as if it’s a fresh installation. Could you help me find a solution to preserve my work history so that UTM doesn't reinstall Windows each time I restart it?Please help:" thank u so much, as my work is getting a bit delayed because of this...
i already got solution for thissss, anyone who need this... u can open UTM, select the VM with the issue, click Edit in the top right, select the QEMU tab, enable Debug Logging, click Save, and then click Play to start the VM.
in UTM power bi is downloaded but how should i download it in mac? Its showing that parallels is needed to install power bi in mac? i didn’t get that. pls tell me
hi.ur process suits me well but every time if i want to switch over to windows in utm. it keeps me asking the setup newly. so everytime i am doing the same process so it consuming my time. any options is there ine setup is done directly i can access windows.
Hello, brother I hope that this has been handled; if not, please follow the instructions below. Click "ESC" if the installation window error appears after you have completed the entire process as shown in the video. I had the same problem at first, but eventually everything worked as it should have. "no need to do set up again and again" Thanks and @TheAnalystLens Thanks for the nice video.
Hi , I am trying to follow the method here. UTM & Sky Fletcher download is fine but the windows 11 keep getting rebooted all the time. I have uninstalled & re-installed the ISO file again & consequently the Windows 11. Can you please help ? Also, would buying the paid UTM version help ?
Once I shut down it and I can't open the same windows. it is installing a new one everytime when open after I shutdown. Is there any way open the same windows everytime?
i already got solution for thissss, u can open UTM, select the VM with the issue, click Edit in the top right, select the QEMU tab, enable Debug Logging, click Save, and then click Play to start the VM.
Guys this worked only for the first time, after that this is not working tried multiple times, gone through every comment and it's replies, it's again and again redirecting to windows setup and Installation process
i already got solution for thissss, u can open UTM, select the VM with the issue, click Edit in the top right, select the QEMU tab, enable Debug Logging, click Save, and then click Play to start the VM.
bro i need ur help its going till the installation page and getting installed but wen it asks to restart it goes back to the same installation page again i have macbook 2017 version i5 processor help please
i already got solution for thissss, u can open UTM, select the VM with the issue, click Edit in the top right, select the QEMU tab, enable Debug Logging, click Save, and then click Play to start the VM.
Hi, Thank you for this, it is very helpful. But i have some issue with VM. I did all things you do on the video but the VM doesn't work. I have this on the screen when I start the VM: UEFI Interactive Shell v2.2 EDK II UEFI u2.70 (EDK II, 0x00010000) Mapping table FSO: Alias (s) :CD0a65535a0: :BLK1: PciRoot (0x0) /Pci (0x1F,0x2) /Sata (0x0,0xFFFF,0x0) /CDROM (0x0) FS1: Alias (s) :F0a65535a: :BLK2: PciRoot (0x0)/Pci (0x1F,0x2) /Sata(0x0,0xFFFF,0x0) /VenHedia (C5BD4D42-1A76 -4996-8956-73CDA326CD0A) FS2: Alias(s) :F0c65535a: :BLK5: PciRoot (0x0) /Pci (0x1F,0x2) /Sata(0x2,0xFFFF,0x0) /VenMed ia (C5BD4D42-1A76 -4996-0956-73CDA326CD0A) BLKO: Alias (s) : PciRoot (0x0) /Pci (0x1F,0x2) /Sata (0x0,0xFFFF,0x0) BLK3: Alias (s) : PciRoot (0x0) /Pci (0x1F,0x2) /Sata (0x1,0xFFFF,0x0) BLKA: Alias (s) : PciRoot (0x0) /Pci (0x1F,0x2) /Sata (0x2,0xFFFF,0x0) Press ESC in 4 seconds to skip startup.nsh or any other key to continue.
I have been downloaded windows 11 on my mac but there is problem to connect wifi. It is telling only ethernet can be use for network we can't use any wifi .How to solve this problem can anyone suggest me ?
For this you need to reinstall the ISO image file in Utm , maybe because of some technical error internet is not enabled. If you want We can upload a video on this topic for this comment, "INTERNET ERROR" .
excuse me my laptop is MacBook Pro M1 and I followed your steps and I finish the setup process, but it doesn't open the desktop it keeps getting me back to the setup step. how can I fix this problem please?
I installed the windows using UTM. But after sometime, it is showing error when I try to reopen windows via UTM. Error: Cannot access TPM data Can you help me on this?
Lo hice y pude acceder al sistema windows pero reinicié y no arranco mas. Intente hace nuevamente el proceso y crea como un loop en en UTM, no avanza a permitirme acceder . No se que hacer porque me di cuenta que no instala las herramientas lo he hecho mil veces ya
Hi sir can u help me with a problem that after I used power bi in windows- mac & after switching off the laptop again while opening all the data’s that I entered got deleted & again I have to enter the datas & install the power bi again & again.. can anyone help me with this problem ASAP…
i already got solution for thissss, u can open UTM, select the VM with the issue, click Edit in the top right, select the QEMU tab, enable Debug Logging, click Save, and then click Play to start the VM.
![NISAMANEE - TADA (ท้าดา) [ OFFICIAL MV ]](http://i.ytimg.com/vi/hcQHEPMmJpU/mqdefault.jpg)
![Installing MySQL Database On MacOS [Apple Chip and Intel] | Install the Right Way Step By Step Guide](/img/n.gif)
🎯 Key points for quick navigation:
00:00 *💻 Introduction to Power BI on Mac*
- Power BI desktop is not natively supported on Mac,
- Introduction to using UTM and Crystal Fetch to install Windows on Mac as a workaround.
02:16 *📂 Installing UTM and Downloading Windows ISO*
- Process of downloading UTM, a virtual machine application,
- Downloading the Windows ISO file using Crystal Fetch.
04:09 *⚙️ Setting Up the Virtual Machine*
- Installing Windows on the UTM virtual machine,
- Steps to configure the virtual machine settings and importing the Windows ISO.
11:06 *🚀 Installing Power BI on Windows via Mac*
- Downloading and installing Power BI on the Windows virtual machine,
- Ensuring smooth operation of Power BI alongside MacOS functionalities.
13:54 *📊 Conclusion and Additional Uses*
- Power BI can run smoothly on Mac through virtualization,
- Ability to run other Windows applications on Mac using a virtual environment.
Made with HARPA AI
Thanks
Your process did work for me, Thank you so much for this video.
Please support us. Thank you share this with others too
I’m stuck at minute 6:52, when I tried playing the windows set up it just keeps saying error QEMU exited from an error…..
I use a Mac book pro 2023
Delete your current iso file image and repeat the same process after restarting your machine
@@TheAnalystLensRestarting the machine means what ? What Should we restart ? Can you tell that clearly ?
I'm stuck here 7:01 , it shows black page with weird codes and a lot of "mapping" and don't go forward
me pasa igual necesito ayuda :(
Please delete the existing iso image file and repeat the same process.
@@TheAnalystLens same problem - i've deleted the iso file and downloaded again, but the result is the same :(
@@TheAnalystLenssame with me brother
But doesn’t work after deleting and making another iso file
@@TheAnalystLensplease asap
It’s very urgent for me to download
As a newbie to tech, this worked well, thank you! Couple of questions:
1.Once it's installed, can we delete the .iso file (5+ GB) which we downloaded or does it need to stay for everything to work?
2. If we want to 'uninstall' everything we just did and go back to getting the full memory of the macbook back , what are the steps to do that?
Thanks in advance!
Thank you buddy keep supporting us.
@@TheAnalystLensit would be nice to have your responses to the questions asked in my comment. Thanks
@@anandm5849 hey how'd you get .iso file separately because it's only the app itself from the app store that
i downloaded...
I think you can't delete the ISO file becaus it is fetching in image in real time but u can delete the UTM.dng
When I tried to run window 11, it shows a mapping table that you did not have on your video. So I totally get stuck at 7:06 and cannot move more. Please help me!
My Mac is Mac Air 13 is one of M1 chip
Yes it will work you just need to re configure it.
Am stuck here too.
@@TheAnalystLensI’m stuck. The same thing it’s happening to me
@@TheAnalystLens How do I reconfigure it?
This video was of great help. Much needed thing . Thanks for this one.
Thank you keep supporting us.
Thankyou!! This video has made my day .. very helpful
Thank you keep supporting us
Heyyy...would u help me too.. I am not able to do it...I m having M1
how can you get that TH-cam icon on bar & how is your icons are highlighting while you moving your curser on that icons
U can do it while uploading ur video on TH-cam.
Hi bro after click on play in utm shell window is opening can you help me on this
hi it keeps asking me to install windows multilple times even after installing . can you please tell me what to do
A mi también me esta pasando
Same here can anybody help?
Please delete the existing iso image file and repeat the same process.
When you're done installing windows and it asks you to press a key again, you don't press any key but you just wait.
@@TheAnalystLens It did not work even after multiple attempts. I also tried to install windows 10 both x86 and x 64 still it did. not work.
It is restarting and then asking to setup windows again.
Wow. Very detailed. It helped me. Thank you.
You're welcome!
finally work for me but how will I import data
You need to connect your mail
Hey can you tell me if we can have MS Office (Power Point, Excel) installed here ?
No u need to install it separately.
Please read and reply to help me to get out of confusion.
Will it work as smooth as in Windows laptop? If i install window 10/11 with help of UTM in MacBook Pro i7 16GB & 512GB.
It will smooth well but it also depends on the application you are using on the windows
Thanks bro I needed this
Any time
Worked like a charm! thank you so much
Thank you for this supporting us.
@@TheAnalystLens hello
This worked for me at the first time
But then it suddenly stopped working !
Could you help me please?
I get stuck on the shell and it does not start up !
I tried deleting everything and doing all steps again
But it did not work
Could you please help me ??
Omg it really worked, thank you so much
Thanks you. Please support us.
I have mac os catalina. which doesn't allow me to download the crystal fetch iso downloader on apple app store. so how can I go further? plz help me
Please share the screenshot
do need the crystal fetch app if we already have an iso file ?
If you have an iso file you can directly upload it on utm
@@TheAnalystLens yes i still have the iso file, but is there is any performance difference between VMware fusion and UTM, i am using it only for running and developing Power BI reports.
Also thank you so much for replying! :)
Hi! I'm also using UTM, but I'm facing an issue where I need to install Power BI in Windows within UTM. However, when I turn off UTM and later try to resume my work in Power BI, my previous progress is lost, and UTM reinitializes Windows as if it’s a fresh installation. Could you help me find a solution to preserve my work history so that UTM doesn't reinstall Windows each time I restart it?Please help:" thank u so much, as my work is getting a bit delayed because of this...
i already got solution for thissss, anyone who need this... u can open UTM, select the VM with the issue, click Edit in the top right, select the QEMU tab, enable Debug Logging, click Save, and then click Play to start the VM.
thank you
thanks brother you solved a very big problem
Thanks for supporting us.
This is great! Is there any difference between downloading from the website or downloading from the app store?
No both are same
Thankyou soo much sir !!!!!!! this video is really helpful for me
Thanks for supporting us.
@@TheAnalystLens Thankyou sir !!!!!!!
Thanks a lot for this video !!!
You are welcome!
Thank you, it worked, but it's a bit laggy. Also tried to install SSMS, but I don't know, what would you do mate?
Hey your welcome, I'm working as a business analyst
Hey your welcome, I'm working as a business analyst
Thank you very much for the clear guidelines
thank you
Is rly running smooth like on windows ??
I wanted to know does it harm the mac processor as you are running and using windows on it... please lmk
I have M1 2020 version
No it wouldn't harm your MacBook.
can we do all this in an external ssd
No, because iso image needs to be saved in internal
Hi,
The system is repeatedly restarting and the same process needs to be done. can you help me with this?
Please delete the existing iso image and then repeat the process
@@TheAnalystLens I tried twice bro, still same problem ! please give any solution for this as soon as possible, my work is pending !
does this work for macbook air intel processor ?
Yes
@@TheAnalystLens no
no
in UTM power bi is downloaded but how should i download it in mac? Its showing that parallels is needed to install power bi in mac? i didn’t get that. pls tell me
You can connect us over mail
It worked, thank you
Your welcome 🤗
hi.ur process suits me well but every time if i want to switch over to windows in utm. it keeps me asking the setup newly. so everytime i am doing the same process so it consuming my time. any options is there ine setup is done directly i can access windows.
No you don’t need to repeat the process again and again just install it once and enjoy your windows
its is asking me the process of instalattion in utm for windows again and again please help me with the solution
First delete the existing utm application and then repeat the same process
Hello, brother I hope that this has been handled; if not, please follow the instructions below. Click "ESC" if the installation window error appears after you have completed the entire process as shown in the video. I had the same problem at first, but eventually everything worked as it should have.
"no need to do set up again and again" Thanks and @TheAnalystLens Thanks for the nice video.
Is it available for mac air 1
Yes it is available for all
Is 4 gb ram is enough for windows ? Or should i upgrade?
It's enough
Brother even after completing the whole windows setup process, it again shows the windows setup screen. Can you help me on this?
maybe the iso file is not fetched properly you can do one thing just install the window again and make sure deleting the existing iso file
I'm stuck at the UTM website because it would not download. But when I click on Mac App Store , it loads.
Try to download it again
@@TheAnalystLenslike I can’t download it at all.
Hi, i followed the procedure but I am getting an error saying QEMU error, failed to lock byte 100
Please connect us through mail.
Hi , I am trying to follow the method here. UTM & Sky Fletcher download is fine but the windows 11 keep getting rebooted all the time. I have uninstalled & re-installed the ISO file again & consequently the Windows 11. Can you please help ? Also, would buying the paid UTM version help ?
No you don't need to buy the paid version of the UTM. Delete the current Utm application and then install it again.
Once I shut down it and I can't open the same windows. it is installing a new one everytime when open after I shutdown. Is there any way open the same windows everytime?
Please delete the current iso file image and then restart your mac and upload new iso file image.
@@TheAnalystLens can you show it to us, cause i got the same problem,,, i need help
i already got solution for thissss, u can open UTM, select the VM with the issue, click Edit in the top right, select the QEMU tab, enable Debug Logging, click Save, and then click Play to start the VM.
Guys this worked only for the first time, after that this is not working tried multiple times, gone through every comment and it's replies, it's again and again redirecting to windows setup and Installation process
Once you setup the window interface on mac you don't need to repeat this process again and again.
Thank you
Like how to switch off the laptop & not getting the data’s deleted in windows- mac while I m opening .. pls reply ASAP
Please login to your power bi account in UTM.
i already got solution for thissss, u can open UTM, select the VM with the issue, click Edit in the top right, select the QEMU tab, enable Debug Logging, click Save, and then click Play to start the VM.
Can you please provide the link to get .iso file?
You need to download the ISO file on your MacBook.
Thanku you
Bro have you got the link... Could you please provide the link
"Cannot access TPM method" is being displayed, whenever I am trying to run windows after its installation in UTM.
Any idea how to solve it.
Please delete the existing iso file and install a new one
Thank you so much dear it helps me be blessed
It means a lot.
@@TheAnalystLens All the best keep going
Is it safe , can i start my office work with this ?
Yes it is completely safe
@@TheAnalystLens does it crash while using?
Facing issues with the wifi drivers installation
delete the existing iso file and reupload it
I followed the same steps and It worked fine but idk for some reasons internet is not working. How can I fix this issue?
This happened because driver automatically chooses to open with local network.
@@TheAnalystLens how to fix this issue?
@@TheAnalystLens how to fix this? please help
Hi!! Did you find a solution? :(
Also, I'm facing the same issue. Has anyone found the solution? Appreciate ur help
after the installing part when it ask to press any key it agains starts to install the window from the first step. plz answer this
Please delete the current iso file image and install a new one
It is taking me to a command prompt page after i and done with with adding the iso file in UTM and press the play button. Please HELP!
same happened with me
no idea what to do
It's due to the Mac specification first re-start your mac and then upload a new iso file image and then click on start.
Please when I tried to put the iso into the utm, it just kept on loading nonstop
I got the Virtual window but the graphic quality is super low. I can barely see anything, especially small text please help.
You can install the iso image of windows 11
bro i need ur help its going till the installation page and getting installed but wen it asks to restart it goes back to the same installation page again i have macbook 2017 version i5 processor help please
Delete the current iso file image and repeat the process.
How do I connect the Windows Tab a Wifi network?
You can just connect it normally or can see u drivers setting too
Hello.
The installation of Windows 11 is not working on my MacBook Pro. What do I need to do?
Is it completely not working or laging
where can I download the ISO file?
You have to download it from crystal fetch
whenever i close it it gets corrupted and vm stops, how to safely close it?
you can just close the window by shut down and than close the tab.
The resolution of the window in UTM is not good, Its a little blurry and lags to much, what to do?
While installing the iso image in utm choose the higher version of windows which will improve the resolution of your windows.
LOCKED BYTE EEROR is showing up what to do ?
Please reinstall the iso file image
thanks a lot, It worked!
thank you
I am trying with the same steps but it keeps installing the windows again and again.......any clue what I am doing wrong?
Delete your current iso file image and repeat the same process after restarting your machine.
i already got solution for thissss, u can open UTM, select the VM with the issue, click Edit in the top right, select the QEMU tab, enable Debug Logging, click Save, and then click Play to start the VM.
Bro, is the existing wifi of mac running on UTM windows?
Yes it's running
Facing UEFI interactive shell v2.2
Delete your current iso file image and repeat the same process after restarting your machine
Thanks , it worked for me too
Keep supporting us
Having issue with internet when switched to windows
You need to restart the utm once
Hi,
Thank you for this, it is very helpful.
But i have some issue with VM. I did all things you do on the video but the VM doesn't work. I have this on the screen when I start the VM:
UEFI Interactive Shell v2.2
EDK II
UEFI u2.70
(EDK II, 0x00010000)
Mapping table
FSO: Alias (s) :CD0a65535a0: :BLK1:
PciRoot (0x0) /Pci (0x1F,0x2) /Sata (0x0,0xFFFF,0x0) /CDROM (0x0)
FS1: Alias (s) :F0a65535a: :BLK2:
PciRoot (0x0)/Pci (0x1F,0x2) /Sata(0x0,0xFFFF,0x0) /VenHedia (C5BD4D42-1A76
-4996-8956-73CDA326CD0A)
FS2: Alias(s) :F0c65535a: :BLK5:
PciRoot (0x0) /Pci (0x1F,0x2) /Sata(0x2,0xFFFF,0x0) /VenMed ia (C5BD4D42-1A76
-4996-0956-73CDA326CD0A)
BLKO: Alias (s) :
PciRoot (0x0) /Pci (0x1F,0x2) /Sata (0x0,0xFFFF,0x0)
BLK3: Alias (s) :
PciRoot (0x0) /Pci (0x1F,0x2) /Sata (0x1,0xFFFF,0x0)
BLKA: Alias (s) :
PciRoot (0x0) /Pci (0x1F,0x2) /Sata (0x2,0xFFFF,0x0)
Press ESC in 4 seconds to skip startup.nsh or any other key to continue.
Just delete the existing data from the utm
@@TheAnalystLensI m having the same issue it’s stuck what should I do
same here but mine solved, just click space (kinda spam 4 times:") when your screen shows "please press any key blablabla"
does this version of windows iso file not work with apple silicon??
It works on the silicon version too I am using it on that.
Yes, it will work.
i still have catalina, i cannot install crystal fetch from the app store, what can i do
Will you be able to download the crystal app from external site?
@@TheAnalystLens please do you have a link ?
Yes I have the same issue
Can you give a link to download windows 11
You need to download the iso image file from Crystal fetch.
@@TheAnalystLens Thank you 😊….
I have been downloaded windows 11 on my mac but there is problem to connect wifi. It is telling only ethernet can be use for network we can't use any wifi .How to solve this problem can anyone suggest me ?
Do one thing delete the current iso image file and upload a new one and select connect through LAN.
Did you fixed it?
Thank you so muchhh
Your welcome keep supporting us
Hii is it working fine ? Can you help me out ?
Thankuhh...it worked for meee
Thank you keep supporting us
My Mac Air is use x86, can I use UTM?
Yes, please check your disk size also.
i am stuck after installing it on UTM at 6:57
Please connect me over mail
Lets connect to a network after this i didn’t getting next option even i am connected with wifi still is it showing connect to a network
Sure will u please describe ur issue
Hiii…it is showing error when tried to press the play button in UTM …can you please help?
Remove the current iso image file and repeat the same process.
How to swiftly switch from UTM to mac screen
just minimise the UTM tab and close it .keep supporting us
After the installation I am facing an issue with drivers, I get stuck as there are no WIFI drivers, so the setup doesn't move forward.
Delete the current iso file and than reuploaded it
iPad me kese karu?
I will upload a video for this
The new office were installed but I can't connect to the internet to download Power BI ... How can I connect it to the internet by wifi ?
For this you need to reinstall the ISO image file in Utm , maybe because of some technical error internet is not enabled. If you want We can upload a video on this topic for this comment, "INTERNET ERROR" .
INTERNET ERROR@@TheAnalystLens
@@TheAnalystLens internet error 🥲
Hey bro... I'm unable to het into the windows 11 after installing UTM and all... Its asking for command... Please help me
Please Delete the iso image file and load it again in UTM.
It's still not work and same, the command appear
excuse me my laptop is MacBook Pro M1 and I followed your steps and I finish the setup process, but it doesn't open the desktop it keeps getting me back to the setup step. how can I fix this problem please?
Please repeat the same process again.
@@TheAnalystLens I repeated it three times and it keeps restart on setup process
??
I am getting "start boot option" after installation. What to do. Plz help
please reinstall the iso image file again.
How much free disk space is needed to instal windows ??
Up 12gb
they ask to activate your windows once everything successfully installed. Any idea why?
Don’t know why this issue is arises as you downloaded it on iso file
I installed the windows using UTM. But after sometime, it is showing error when I try to reopen windows via UTM.
Error: Cannot access TPM data
Can you help me on this?
You need to repeat the same process maybe the data is not fetched.
didnt work for me. can you please advice what could be the issue
In which part are you facing problem
Lo hice y pude acceder al sistema windows pero reinicié y no arranco mas. Intente hace nuevamente el proceso y crea como un loop en en UTM, no avanza a permitirme acceder . No se que hacer porque me di cuenta que no instala las herramientas lo he hecho mil veces ya
Thanku
hey, i'm not able to connect to wifi bro,please helppp, i'm using macbook pro m2 chip
Please delete the existing iso file image and reinstall it on utm.
Muito obrigado! Passo a passo simples, rápido e GRATUITO
Thank you
It didn't work for me. Is there a way to communicate to show you the problem?
Connect us over mail
Could have been better if you could have included the steps for downloading "Windows ISO Image File".
It's a one step process and already included in the video.
After installing windows 11
Wifi is not getting connected
Hi sir can u help me with a problem that after I used power bi in windows- mac & after switching off the laptop again while opening all the data’s that I entered got deleted & again I have to enter the datas & install the power bi again & again.. can anyone help me with this problem ASAP…
You must login to your power bi account in utm in order to save data permanently
i already got solution for thissss, u can open UTM, select the VM with the issue, click Edit in the top right, select the QEMU tab, enable Debug Logging, click Save, and then click Play to start the VM.
Mine keeps asking me to install windows setup. It completes then asks again. Please help
Nvm got it.
Please uninstall the utm and then again install it and upload utm image file.
It worked for me first time, now its showing “cannot access TPM data” , can anyone help on this.
Maybe there is some bios issue, try to login it again
bro it got downloaded but i am unable to downlaod powerbi bcoz it showing network not conncected so how to connect in utm
You need to give the access permission at the beginning of the process.
I am unable to connect to the internet using UTM
For you need to do some settings which model of mac you are using.
same issue
@@TheAnalystLens please help, I use MacBook air m1