Can I save this trashpicked Samsung TV?
ฝัง
- เผยแพร่เมื่อ 4 พ.ค. 2019
- I found a 32" 1080p Samsung LCD TV in the trash. Does it work? If it's broken, can I fix it? (I decide to fix it in Part 2: • Trashpicked Samsung LC...
Samsung LCD TV Model UN32EH5000F
--- Tools
Deoxit D5:
amzn.to/2VvOKy1
store.caig.com/s.nl/it.A/id.16...
Jonard Tools EX-2 Chip Extractor:
amzn.to/2VazxDS
www.jonard.com/Products/EX-2-...
Wiha Chip Lifter:
amzn.to/3a9ftWw
www.wihatools.com/precision-c...
O-Ring Pick Set: (I use these to lift chips off boards)
amzn.to/3a9x54J
Elenco Electronics LP-560 Logic Probe:
amzn.to/2VrT5lW
Hakko FR301 Desoldering Iron:
amzn.to/2ye6xC0
Rigol DS1054Z Four Channel Oscilloscope:
www.rigolna.com/products/digi...
Head Worn Magnifying Goggles / Dual Lens Flip-In Head Magnifier:
amzn.to/3adRbuy
TL866II Plus Chip Tester and EPROM programmer: (The MiniPro)
amzn.to/2wG4tlP
www.aliexpress.com/item/33000...
TS100 Soldering Iron:
amzn.to/2K36dJ5
www.ebay.com/itm/TS100-65W-MI...
EEVBlog 121GW Multimeter:
www.eevblog.com/product/121gw/
DSLogic Basic Logic Analyzer:
amzn.to/2RDSDQw
www.ebay.com/itm/USB-Logic-DS...
Magnetic Screw Holder:
amzn.to/3b8LOhG
www.harborfreight.com/4-inch-...
Universal ZIP sockets: (clones, used on my ZIF-64 test machine)
www.ebay.com/itm/14-16-18-20-...
RetroTink 2X Upconverter: (to hook up something like a C64 to HDMI)
www.retrotink.com/
Plato (Clone) Side Cutters: (order five)
www.ebay.com/itm/1-2-5-10PCS-...
Heat Sinks:
www.aliexpress.com/item/32537...
Little squeezy bottles: (available elsewhere too)
amzn.to/3b8LOOI
--- Links
My GitHub repository:
github.com/misterblack1?tab=r...
Commodore Computer Club (of Portland, Oregon and Vancouver, Washington)
www.commodorecomputerclub.com/
Tivoo Pixel Art Display seen in my videos:
www.amazon.com/Divoom-Tivoo-r...
--- C64 Stuff
JaffyDOS:
blog.worldofjani.com/?p=3544
C64 Test Harness I use:
• Building a Commodore 6...
C64 Homebrew cartridge PCB: (used for the DeadTest / Diag Cart I use)
www.ebay.com/itm/Commodore-64...
EasyFlash 3 Multi-Cart:
store.go4retro.com/easyflash-3/
--- Instructional videos
My video on damage-free chip removal:
• How to remove chips wi...
--- Music
Intro music by:
Nathan Divino
@itsnathandivino
Outro Music:
Abyss by | e s c p | escp-music.bandcamp.com
Music promoted by www.free-stock-music.com
Attribution 4.0 International (CC BY 4.0)
creativecommons.org/licenses/...
--- Image Credits
None - วิทยาศาสตร์และเทคโนโลยี
![[FULL EP.69] #เอิร์นจิรวรรณ เปิดบ้านหมื่นล้านทุกมุม ครั้งแรก! l เคหสถานบานปลาย l One Playground](http://i.ytimg.com/vi/_J4_nw8c64o/mqdefault.jpg)
I think it's worth trying to fix. If the new LED strips bring the TV back to life, you have yourself a $20 TV. Worst case is that you're out $20. The fact that it's a 1080p TV makes it more worth it, since most 32" sets seem to be 720p these days.
I 100% agree, that TV is worth $20 to fix it. it a good brand too samsung, I have a 1080p 144 hrz monitor on my gaming PC and the thing been a great monitor, the wife bought a MSI brand 4 years ago same time same specs and that one is in the trash heap already.
I have an Insignia TV from Best Buy for an Airbnb House and it's lasted for several years, but the on-off switch went out. It's hard to fix, BUT I saw a video on replacing that switch as long as I can find the part. I did replace the TV with a higher quality one, BUT I'll replace the switch and fix it when I am able to find the time - shouldn't take long.
Hello, Adrian, good to know your channel.
I've worked in Samsung's Customer Service for years, here in Brazil, and I've seen thousands of defective TV sets like these, from series E, EH, F and FH. Just to your knowledge, series EH and FH (and all series with xH mark) are refurbished and "testing" models. You can notice that just by looking into EH and FH, some models (at least in Brazil) are exactly the same, with few modifications on PSU and main board.
This problem with LED bars happens because the PSU always have a bigger voltage than expected, when the client changes the parameter "Backlight" in the menu to the maximum, the voltage in this particular model goes up to 140VDC at some point, with peaks between 100~125VDC. What I usually did is changing some resistors in the PSU to put down the voltage to maximum 100VDC on the inverter, because this LED bars gets REALLY hot when in use, and often the client comes back with the same problem. It happened four times with a client, who used to connect to an Xbox 360 and gaming for hours, and I have to modify the PSU to not destroy more LED bars.
And, please, be careful with the live cell (the LCD display, it's the name that they give to it, don't ask me why :P ). The good way to mount it back is the opposite way that you dismounted in the video, putting the live cell for last, allign it, because or break it when you are moving, or break it when try to close the outer frame. My personal experience when I started to work on this repairs.
Congratulations, and thanks.
P.S.: I've forgot to mention: the SamyGo projetc have lots of documentation about hacking Samsung TV's, BD players and home-theaters, how to access the TV through serial port and more. Good Luck!
Invaluable tech info you give here. Thank you, thank you, thank you!
Lower voltage is the key. Things lasted longer when we had 110 or 115 volts ac. Now days line voltages are 125 and even higher, I had issues with my led Christmas light strings, I would lose at least 4 in one months time. I bought a voltage reducer by apc the ones that make ups for compters. Now nothing burns out I haven't changed a bulb in at least 3 years. When I go solar I will keep in mind to get a Prue sine wave inverter that only puts out 110 volts I think there is an inverter that has a 105 volt setting I won't use that for motors or or motor driven appliances. Well enough on this.
@aleon1018 I have to tell you that was the best chice, new LED sets are more reliable than replacing each single one.
@@ronb6182 Great advice. I'm used to put no-breaks and modify those units to a maximum 105/110VAC on the output too. Thank you!
@kcotte59 I use a Line-R 1200 by APC the same company that make Computer UPS s. I can use 1200 watts of LED lighting. The reason a mentioned a power inverter if I decide to go solar. There is one inverter that has multiple output voltages 105 to 125 vac pure sine wave.
I encourage you complete the repair. I enjoy watching your adventures in repair electronics and your solutions to issues that arise during the process. I learn a lot about electronics and how electronic gadgets work from watching your videos.
Hi Adrian I believe you said that your power supply was set to 9 volts, If so you should not test individual bulbs with it set to 9 volts. This would explain why led's were blowing up as you went along during your testing. You can supply 3 volts max per bulb times the number of bulbs in series and find quite quickly which row is the problem, then when you find the faulty row reset your power supply to 3 volts max and go looking for the problem , one led at a time. I don't think I heard you explain to viewers for them to dial back their power supplies. I am a technician of 45 years. Hope this helps people out. W
Go for it! I thought this was really interesting and would love to see it turn on.
It’s not what you normally do as far as videos but I really dug it.
Great educational video! And Thank You for NOT using background sound/ racket so common these days!
EXCELLENT video.... you spoke clearly, you explained what you were doing, the camera work WAS PERFECT (focus, lighting, etc), you intelligently cut out the boring parts (removal of screws, etc) and what you did keep was helpful to someone still finding their way around inside one of these.
Thanks!!!
Diminishing returns. I spend waaaay too much money trying to fix things without your level of training but for me the value of this video and many others is watching your methodology and skill in the triage and repair process. Kudos.
I say fix it! Watching your method to determine the issue is really interesting. I really enjoyed the video.
I had the exact same problem on my TV that is the exact same model, one day from nowhere the Screen turned black and that was it 💔 only 3 years of use, I had an idea what could it be so I took it apart, after checking the 2 boards (Main and AC Board) didn’t see any issues. At that moment I was 100% sure was back Light LEDs issue, ordered the LEDs stripes replaced them and problem solved 💜
Also I used 3 9V Batteries to test the complete stripes from the (+ -) test area at the beginning of the stripes and showed me some LEDs were dead, it was a quicker and easier way to do it without his tools (Tester).
Can't wait to see you fix that TV in part 2
Thats the first time I have seen what's inside of a led tv! Thanks for sharing!
Thanks for a look inside a flat screen......I very much appreciated your commentary and your sharing your knowledge and experience.
Yes its not your normal type of retro repair, but its great to take on other challengers from time to time. keep up the great work Adrian.😃😃
Loved the video. Please do this more.
Hours cut so I dug an almost identical one out of the attic. Was told it was probably the backlight. Gives me hope I can get it back working. Thanks for taking the time
Very educational video, found out a lot how the flat screen TV's work and about the "backlight"! Keep going with this TV and let us know how you progress with it. Thanks for your patience and explanations.
Aw common just fix it already. 😀 You couldn't replace it for 20 bucks but if you don't need another TV them just scrap it for parts. As far as content it's still digital and it did end up in the basement so all good stuff. Thanks for bringing us more diverse videos!
I always wondered what the back of my Samsung to looked like thanks for showing. I would like to see you fix it.
How do I get the lines that went up
Great video, simply explained. Auto play brought me here & i gotta say, your voice is so enjoyable to listen to
I think it's inspiring that you tried to fix it, and you taught us a lot, too. See if you can get an equivalent LED to replace them with! We can wait for shipping.
Maybe you could use some Globe LEDs th-cam.com/video/g8bGdM-Y_is/w-d-xo.html
This was a fun memory trip. I say if $20 gets you both strips, fix it, then you have two TVs and one spare backlight. You can give the working trash TV away or put in to use elsewhere.
Our big Samsung lost a few of the 8 backlight strips and after researching, the best deal I found was a set of '100% good' salvage parts. 37.5% were bad, but it was enough to fix, and have spares. TV is still working great!
I have a few LCDs I wanna fix that seem to mostly have dead backlights, one in particular def does. Glad you made this!
O[))))llou677oy\
Yyyl
Iyo
Iylyoyo
L
L
L
'll
L
It
55
Great video! Highly useful. I usually don't work on the panel, just order a new one if I have to go past the T-Con. Thanks, Adrian!
Love the torch test!
You can replace the individual LEDs instead of the whole strip and it would be cheaper, also if you get to fix it, set the backlight to 80/85% to preserve them. People tend to have the backlight at 100% but 100% drives them hard and will kill them in a short time.
thanks for sharing your knowledge; what kind of welder do you recommend to only change a led without damaging it. thanks
I'd recommend a TIG welder if you're experienced, if not just go with a stick welder
I have 2 TV's over 10 years old I set at 60-80% still going and never had a problem. I just trash picked a 4 year old Samsung 50" from an old lady neighbor of mine that had a bad backlight diode. Just fixed it real cheap. Reak nice clean TV. One thing I noticed is the 2 Samsung's that I have, both 2018 TVs, one is a 50" UHD 4K and the other a 50" 5 series, both default the backlight brightness to 100%. So if you don't know to check it you'll be getting a new TV or a repair in a few years. (2-4).
Interesting video that gives a lot of insight into how modern TVs and led panels work. You can see how these things are designed to be modular and repair usually just involves replacement of larger, but still relatively cheap components. Also, seeing how these are made compared to the price the markup on them seems like it's pretty huge.
They are modular, yes, but that's due to the nature of how these panels work. They are not made to be repaired: manufacturers do not like to hand out information on what to look for when troubleshooting them down at part-level. For regular consumers, those relatively cheap components are usually hard to get, and some brands actively discourage consumers from being able to replace parts by not making them available to them, and sometimes have a price-point that is deliberately designed to put people off from buying the replacement part to sway them to buy a new set...
I like your video. My Samsung is turning off and on bye it’s self! Led me to your channel. Thank you so much for trying to save and up cycle these TVs with issues. Much gratitude and appreciation 👍👍
A very good advertisment of Samsung television company and the great narrator.
couldn't wait to watch your video. definately fix it for 20 bucks!
I found it interesting and educational despite whether or not it was fixed. I agree with your decision to save reusable parts and trash the rest. I'm the curious type that loves this type of challenge. I've saved a ton of money over the years just by investigating. An example: A very expensive Wagner Paint Sprayer. Bought at a home resources center that sells used building supplies. Paid $8.00 Appeared to have been used once and not cleaned properly. I soaked a rag in laquer thinner, wrapped around parts to soften enough to remove. Then soaked and wire and toothbrush cleaned. Sprayed cleaned parts with silicone. Put back together and used it for approximately 5 years. Painted house, fence, bi fold doors, garage overhead door, decks etc. Wagner is known to readily give out if not given pristine cleaning and re silicone moving parts. Idk. Some might have the money to buy for 1x use and toss but not me. I was widowed at a young age and proud, as a female, to have learned so many money saving skills. My uncle taught me many and after he passed I turned to you tube. So, thank you so so much for taking your time to video this great presentation. I will be subscribing and tuning in again. I'm 70 y.o. now so not as actively repairing things anymore but at times still tackle projects that appeal to my love of a challenge. Thank you again!!
Good video whether you replace the LED's or not. I enjoyed watching you diagnose the problem! Keep up the good work and I am subscribing.
I love to work on this type of stuff. I learned a couple things thanks
Fix It!!! That's why we watch this channel. LOL
Yeah!
Agreed
The easiest fix for this would have been to simply wire in a bright flood light into the back. lol
rip youtube upload lol, also, $20 aint bad for replacement parts, i say just get those, don't think its worth replacing the led diodes themselves.
I agree - fix it. It is worth way more as a functioning display than the sum of its parts.
@Scott Lichtsinn You can get a new one for less than $100 with new features and comtemporary methods of connectivity - ability to play video files on flash drive, function as computer monitor, etcetera. I don't think it would be so easy to sell it for $50. I recently bought a 19 inch monitor for $5.00. It doesn't have a TV receiver built in, so a display with a tv receiver would be worth maybe a little more than $5, say $10. Only thing wrong with it: 2 or 3 pixels don't function. Is it LED backlit or CRC tubes, I don't know.
@Scott Lichtsinn I live in Asheville NC and I bought my $5.00 19 inch diagonal monitor here. 16 inches by 10 inches. It is 1440 x 900 pixels. I'm using it now so I can look up the model number easily. Branded "Envision." Model G918w1. I think it was manufactured around 2008 or so. I seem to recall being able to download the owners manual. I bought it at not-for-profit second-hand shop. Before buying it I was allowed to plug it in to a 120vac outlet to see if the "no signal" legend came on the screen, but not allowed to plug a signal into it to see if the signal got carried all the way through. I knew at least that the backlight was working and some of the pixels were functioning. So I was taking a small risk with my $5. The not for profit company claims that people donate their used stuff to them, they sell the stuff to other people and they use the revenue from those sales to operate a no-kill animal shelter. Yes I was surprised it was only $5. I think Goodwill and Salvation Army are selling similar ones for $20 or $25 leading me to believe I might find one at a yard sale for around $10. I have picked up 2 other flat-screen monitors for free. One from a friend who bought a newer, bigger one, and one from an estate sale.
If I can't get it working I save a few choice parts like the leads on the ribbons The boards and Fresnel lenses diffuser etc.
@@soilmanted All the new PCs, even the SBC type have HDMI out. And, seeing it is a 32" Samsung, it probably is at least 720P. I have one that is 1080P that I use as a monitor on my Win 10 desktop. Also the HDMI out means you get the benefit of stereo quality sound for normal PC functions. For $20 it's worth it.
This is INSANELY interesting.. Thanks for the content!
Already looking forward to the next vid!
I had an LG 32inch LCD suddenly went dark but the sound was on. After a quick checklist... I figured the LED backlights had gone. $17 on AliExpress and a couple of weeks... they arrived. I'm not particularly good with electronics... but after watching some TH-cam videos on similar TVs... and two hours of fiddling later... I had the new LEDs fitted and nervously switched it on. Nothing. Quick check. I'd forgotten to plug one of the two ribbon connectors from the TCON module to the panel. So that's good news... tried again... and BINGO! It worked. Great sense of achievement. Even if it is a simple fix to experienced types.
You have to start somewhere plus you now have more confidence to fix other things.
Its the greatest feeling in the world to revive something that is 'dead'. We all began fixing the simpler things.... So well done! Greetings from Australia.
Well Done!! You are right, fixing stuff that others have given up on is a personal triumph.
I found this hilarious; "I'm sorry for the glare, but this is where I had the remote."
Enjoyed the teardown and look around. Thanks!
I like the video because it solved a riddle about a similar Samsung that I own. I like watching trash picked tear-down and repair vids
$20 and a bit of elbow grease for a 32" TV? Yeah i'd take that any day.
I say fix it but on a component level (replace only dead LEDs). That could be fun and interesting. Give yourself a budget, say 4-5$ total. Waiting for part 2...
As he mentions, the aluminium backing is essentially a giant heatsink. Ive tried this before and even flooding with lots of heat it's very very difficult to remove the LED's from the strip.
You would also want to source the correct matching LED's because different types will draw different currents and have different voltage drops across them. This could possibly confuse the controller or might end up with different brightness LED's etc.
Having said that, I personally would fix the set. $20 isn't too bad.
Ye had a vidao brand tv that have shadows because they have leds with different brightness.
@@arongooch yes, soldering this leds strips can be a pain in the ass but it's possible. First i remove the glue from the strip (burned glue really stinks) and place the strip on a piece of steel that allows me to heat it from the back using a small blowtorch, without burning the led strip.
I also keep every led strip i can find (from broken lcd) for spares
@@lionnelc13 That certainly sounds the way to do it.
No way!
This was really, really interesting! Keep up the good work!
Thanks for putting so hardwork
i think you should try to fix it, but not a replacement part. instead try to retrofit something else ( led strip maybe?) i dont know, it would be fun to watch regardless :)
Samsung is shit! They deliberately make their TVs break down.
@@mikeymcmikeface5599 true. I prefer Panasonic long way
Haha all of us are thinking about this fiximg with alternate led but he's not why?
@@mikeymcmikeface5599 Every manufacturer is doing the "planned obsolescence" thing. No exception.
@@organiccold I still have my Panasonic tv after 12 years, it's on every day for around 8 hours and still works just fine, it was pretty expensite at that time, one of the first LEDs
I'd fix it. Even just to sell it on for 30 bucks or so. Generate less trash that goes to Africa. (That's why I fix literally everthing :P)
What, they can't bless the trash, down in Aaaaaaaaafricaaaaa...
I concur with dp vn03
Save them all! ( otherwise good electronics )
Can you fox my ex-girlfriend?
@@GamerDan89 --- Did she come from Africa?
Thank you for the video. I always wondered how they worked.
Thank you for the presentation of this video.
Fix it. Or hack your own LED strip.
That's what I said too
Great idea, wondering if the voltage would be continuous?
thats what failed in it the guy sucks at fixing shit so he doesnt know it...shhhhhh
The easiest fix for this would have been to simply wire in a bright flood light into the back. lol
Any way you can cobble together a dropper (or take power from another rail) to run it on 12v LED strip?
Amazing job yet again. Keep it up!
We will love to see you fix!
A warning about power supply current limiting. There's a capacitor across the line after the limiter. This means the LED will get far more current for a split second. You need to be aware of this. The capacitor value can be pretty high in some supplies.
Assuming the only thing it needs is new LED strips to be functional I think it would be worth the $20 to fix it if you want to use it. As far as content for your channel it is definitely worth fixing.
Thank you for sharing this video, contain a lot useful info, I guess it is better to fix the TV & use it as a monitor in your lab, I guess it worth it , good luck in your work , wish you the best.
Thank you it was very interesting and a learning experience for me thanks
You are great and thinking person,peoples waste resources.
Bridge or replace burned led's,and it will work again.
Perhaps five,six 24v led strips in series will do the job.
Fix it by replacing the dead LEDs, it's a common type failure that I've seen a lot and I really would like to find a trick to repair these cheaper.
Worth the watch ! thanks for the info on what's what .
You are very knowledgeable I actually enjoyed the video
I live in South Africa so please fix it to keep it from being sent here :-)
Man I very seen documentaries on that it's crazy how much e waste ends up in africa
I'd want to know whether the LED supply voltage is high because the LEDs are dead and therefore its not under load, or whether the LED supply voltage is high because of a fault and it KILLED the LEDs.
Fixing it to keep it going is the best way since it saves garbage from landfills and helps others to learn from your content. That's the way I do it. Also, $20 is a cheap fix, but if you want to be even cheaper, look for another similar TV that gets thrown out and use that one for spare parts. I always keep my eyes open for good condition stuff that people throw out, to use as spare parts.
Excellent video to save just in case I need it thanks for sharing
I had the same exact issue with my four year old 46" Samsung smart TV (smart, not!) & the flashlight trick revealed the problem. I fixed mine only because I could, for about $30 bucks. Found the led strip on Ebay but shipped from China. Looked around and found a supplier in Austin Tx...of all places.
For me it was worth the repair and the TV plays just fine, as good as new. After some thought, I think these LED's are sensitive to power surge. Interestingly, everything in my bedroom media cabinet was behind the UPS except the TV...go figure!
Your situation...I wouldn't repair unless it was in pristine condition...You can pickup a 32" at Walmart under $100 bucks...its just whatever floats your boat.
People today get upset about plastic water bottles filling up landfills and ocean pollution...they better start worrying about throw-away-TV's...its epidemic...
Yes, and people don't realize that they can recycle e-trash, too. I mean, aside from all of the really cool things you can do with the screen parts and such, which are shown on multiple other channels on YT, that is. Scrap out what you want to reuse, and recycle what you don't have a use for. 🙂👍🏼
@@MaryAnnNytowl Most people I know are as a-technical as you can find them and wouldn't have a clue what way to turn a screw, or to know which parts inside are the actual dangerous ones...
Fix it, you can do it!
Those strips are worth buying! That would fix the problem. There's also an LCD Tester that makes it simple to test the LEDs. Just $38. It also tests the LED Driver from the power supply.
No.
This is the first time I watch you and I liked.
This is like replacing old school Christmas light bulbs, trying to figure out which one is faulting the circuit; except way more complicated and involved.
Your power supply surely has a capacitor across its output (you see the LEDs flash very brightly at first) This might kill them with the high current
A good quality lab power supply has very little capacitance at its output.
This is what I thought as well.
Excellent video. A mention of the danger associated with the HV capacitors should have been mentioned. Very informative though.
Fix it ! to many tossed today for lesser problems , but worth the fix iam sure !!
the anxiety you were giving me by just nonchalantly touching the power supply and almost touching the caps, dude, CAREFUL
I thought i was te only one 🤭
Great video 👍I fixed few LED TVs with same issue, even though LED should last a long time kinda doesn't because people like bright backlight causing early failure. If customers turn off the lights in the room and keep the backlight to 50% it'll help prolong the backlights. Just my logical guess why it fails.
Yeah thats what I say to people keep the brigness low and your leds will not burn.
my Dell LCD was at the end of its lifespan and just gave up its ghost from backlight failure. i just chucked it because i couldn't fix it at all.
I actually have my PC monitor set to the lowest brightness setting and it's totally fine, looks great in bright settings too
@@adrulb I have it the same way on my CRT, it looks decent.
This pretty cool. I have a Samsung Tv that isn't working and this as been a good lesson in troubleshooting
I truly enjoyed your video. I have a couple of LED flash lights. One lasted 3 days, the other lasted about a month. I have no faith in the cheap junk lights.
I have 4 analog tv's, they are all Sony's, I paid a total of $175 for them. 2 are 36" the other 2 are 32".
Great picture on all. I use converters for my tv's. I have no regrets.
Thank You
Fix it! I want to see that. ...also, I’d love to support you on Patreon or something. =]
I have been doing this type of repairs for about 20 odd years now, those Samsung TVs are notorious for an smd resistor on the T-Con board shorting open and pulling high. Might want to check that. I literally JUST repaired one of those about a month ago and it cost me a total of 57 cents and $3.95 shipping. Also, you'll have to look VERY closely for the smd resistor as it's only about 3mm long.
Can you show me the resistor on t-con board I check mine and that could be my fault mate cheers
You should go ahead, you've come so far. Great
Interesting, just did a repair video on a similar TV with similar issues. Looks like the LEDs in these TVs have a tendency to go bad, and when they do, if you're lucky they go in a closed state. Bought a little heater from ebay to make replacing the individual LEDs a bit easier. Hot air seemed to work also, but more of a pain. You've made it that far, I'd just fix it.
20 dollars ain't nothing. Use some of that youtuber money 😃
Looks like $20 worth of satisfaction if it works. I’d give it a try.
Nice troubleshooting, thanks
Sure, I would try and fix it. Great trouble shooting video.
When one light goes out, they all go out! :D
Madness832 hahah. Movie reference about fixing a TV. genius!
I think you should fix it.
I had this exact experience 2 months ago with a trashpicked Samsung TV that I think looked exactly like this one, even the additional screws for the stand. After determining that it was something blown in the power supply, I just abandoned it and let someone else pick it off my own lawn. Fortunately, they did; more power to them. 💪
Great job & lesson still brother, love Reading all the comments. It's incredibly wonderful to see how kind & positive minded & tremendously encouraging to read all the viewers supportive comments.. wooooow God bless every body.. l learnt more than something too.. cheers.
Costco sells 2 pack of 4 foot led fluorescent replacement lights for $8 That's 8 feet of led strips, why can't you just use those as a replacement? Obviously you'd disasemble the led fluorescent tube imo
hahahahahaha......you're serious, aren't you?
You should try to fix it.
From a technical perspective, it would be interesting to see if you can actually replace individual leds :) Not that that would be the ideal choice if you are 'just repairing' it, but for this youtube channel, I'd definitely would like to see what's involved in doing something like that!
My colleague used an angle grinder to salvage parts of other strips with the same problem and soldered working LED strip pieces in pace of the broken ones in the TV I use now. Works perfectly.
Those TVs are great for using as a monitor, those old LCD Samsungs haven't almost any lag on game mode.
More and more I've been seeing LED backlights fail. I think that at default settings they are driven too hard and fail quickly.
Looking at the cost of LCD TVs nowadays.. they use the cheapest shenzen market parts for sure. People will just throw it away and buy a new one with better specs after 2-3 years anyways so why invest is the logic I suppose.
Maybe they had left it on the default brightness settings as it came from the shop?
@@SlyEcho That's a really good point. I have had to tone down the screaming "look at me!" mode from a lot of new TVs. I shudder at the thought how many are left in the demo mode for years in a dimly lit room.
@@SlyEcho so they sould be off or down really low!
I meant down low?
I learned a lot from this video, Thanks muchly
Usually if it's the leds they will flash but I've never seen one that didn't have a bunch of strips and a few of the leds on some of the strips will go bad so this is a first to me but I've never bothered to repair a small TV. Only reason I know this is because at least the ones I've repaired has had that issue. I'm no professional by far so I am constantly learning new things and this has definitely taught me something. I have learned my lesson on repairing leds though lol. The first few times I replaced just the blown leds and not long after a few more blew. I also had an issue with the first 2 that the globes would fall off and caused spots in and had to take back apart again to fix. Regular superglue doesn't seem to hold them very well lol. I do find it fun to repair them and maybe I'll repair smaller ones now I've watched your video and I'm glad I did because I'd probably just replaced the boards thinking because it didn't flash that leds where fine. Good video thanks. Oh you can replace the leds with either a heat gun or a heating iron. They're actually really easy to replace but I suggest the heating iron which I can't remember name. The strips themselves actually take heat well and it doesn't seem to effect them. You can buy hundreds of leds really cheap but make sure they match. Also I'd use 2 part epoxy for globes and be very careful to place exactly in the correct position because they matter lol. Anyway good luck. I'd like to see you fix it myself.
planned obsolescence worst then capaciotrs and CCFL .
OVERHEATING on plastic strips
parts connected one after another in a single line is called series, parts connected across or next to each other is called parallel, the difference ? in series , if one part goes out,all will stop working. In parallel, if one part stops working, the other circuits will keep on working:Example series LEDs 1 & 2 ,if LED 1 or LED 2 goes out ,or both LED s goes out,the circuit stops working completely. In parallel, if LED 1 or LED 2 stops working ,either LED will still work unless both LED s stop working, then you're screwed,the circuit stops working ,got it? Have a nice day
A friend of mine gave me his broken 50 inch Toshiba. It was only 4 years old but off warranty already. After carefully opening it up, I replaced the LED strips (turns out I only needed one) with a kit I got online shipped to me for about $120.
Best $120 50 inch TV I bought ;)
or just buy a brand new one for 199
@@KaosZ007 Yeah? What brand? Also, how will that help me to learn how to fix something I never got my hands into?
Sometimes saving only a little (or outright purchasing spares for more than the book value of what's being fixed) is beneficial in other ways than just the perceived value. The difference here is consumerism vs. tinkering. I would not otherwise buy a 50 inch TV because I use it like, 2 hrs a week, mostly to play Wii with my family.
The plasma 42 inch I as a result gave to my dad would have just kept being used by me. The end result is that the TV did not end up in the trash piles in Africa, getting open-fire burned for the traces of precious metals within.
My whole channel is about repairing old stuff and selling it. Simply purchasing a new TV would not add value to what I do for fun :P
My vote goes to fixing it. The way is up to you. Definately the most interesting would be led strips or other retrofittings. My 40" is waiting perhaps the same treatment so please, give me inspiration.
I did LEDs recently on a 4K Vizio 55" TV, and it was super hard, had to be very careful with the panel. It worked out well, though. I have a Sony 50" to do LED strips on, too, eventually. I've had better luck in the past with other TVs, only swapping main boards or power supplies, which is much simpler work.