If it were stock wheels I would say put the forged carbon on the rods. But since you have those nice bronze wheels, the bronze wrap on the rods will set it off real good.
Very true but not in a functional capacity as a true splitter designed for that purpose! This chin lip doesn’t create nearly enough downforce to be considered functional
Because this lip doesnt create downforce! Its purely an esthetic piece. If you install a true splitter like the ones from downforce solutions then i dont suggest mounting the rods to your bumper
ZL1 Add-ons? Is that the brand you were thinking of? I have it on my Charger. Goes way under the car and mounts to the radiator support. I have cheap splitter rods like you and no issues.
Its my daytona charger the top part of the rod was connected to the black plastic piece of the lower grille and it came off how do i put it back in place do i just twist the top part or what? Please help me out haha
Couldn’t have found a better video😂 i got practically the same splitter except I got a blacked out Daytona haha
Love watching the build come to life. Definitely soaking up the knowledge for my charger.
💯🙏🏽
I would recommend, if you want show quality, to create index points for exact drill holes.
Best detailed install video! Your car is badass! Keep posting up good content bro!
Thank you💯🙏🏽
Cleanest rod installation on TH-cam 😃
Thank you💯🙏🏽
If it were stock wheels I would say put the forged carbon on the rods. But since you have those nice bronze wheels, the bronze wrap on the rods will set it off real good.
Preciate the input fam💯🙏🏽
That splitter would still work air going over the top of this splitter is still going push down on your front end
Very true but not in a functional capacity as a true splitter designed for that purpose! This chin lip doesn’t create nearly enough downforce to be considered functional
Good content here. Just bought a brand new scat and I want to add a lip and rods, and this helped a lot. Thanks.
Congrats on the new ride! And thank you💯🙏🏽
Just bought my rods. Thanks for this video!
No prob💯🙏🏽
super informative thanks
💯🙏🏽
Ayeeee!!! I needed this one!! Dope video! 🔥🔥
💯🙏🏽 preciate that lady
Aye SP fam 💪🏽 great video about to put these on my car
Squad💯💯💯🙏🏽🙏🏽
Zl1 addons have that thing on the diffuser
Yea it does but I didn’t necessarily care for the look of that diffuser and the placement of the rods on it.
Great video man. I’ve had rods for months and never installed
Preciate it fam but get em put on! It enhances that front end even more!
Low key… those wheels are 🔥
Preciate it💯🙏🏽
deff do the vinyl wrap
Great video man car looks mint 👍🏻
Thank you💯🙏🏽
Do the forged carbon on the splitter rods 💯
Preciate the suggestion💯🙏🏽
Dam beutiful car where can I find that front splitter + rod
Thank you💯🙏🏽 splitter is from carmarka and rods i got from amazon
Thank you bro appreciate it 🙏
I am wanting to install the splitter rods on my ‘22 Charger Scat pack. What length rods did you go with?
10 inch rods
Soooo how is it the downforce won't rip your rods off? I swear if my bumper gets messed up ima be pissed mines not an official splitter either
Because this lip doesnt create downforce! Its purely an esthetic piece. If you install a true splitter like the ones from downforce solutions then i dont suggest mounting the rods to your bumper
@@Srtfiedofficial okok I got you thanks
Bronze vinyl on the Daytona!!!!
Preciate the suggestion💯🙏🏽
The top part of the rod came off how do i put it back in place
You will have to undo it completely and reattach it.
bronze vinyl
does it clear the curbs with stock height?
Depends on the height of the curb but you definitely have to be much more careful even at stock height.
@@Srtfiedofficial thank you bro😁 👍
Do the wrap of the Daytona lol... everybody in the comments saying it 😂😂😂
Lol, aaight we’ll see what I end up with 😅
ZL1 Add-ons? Is that the brand you were thinking of? I have it on my Charger. Goes way under the car and mounts to the radiator support. I have cheap splitter rods like you and no issues.
No that’s not the brand though I think they may have those brackets, not sure though.
what splitter rods did you use i have the same one
Daytona vinyl
Link to that splitter
What size screw did you get to make it fit into bumper?
Not sure of the exact size but it was the screw that came on the splitter rod.
@@Srtfiedofficial Gotchu! Thanks man! Keep the up the good work
Preciate that💯🙏🏽
So fresh👌👌😩😩
💯🙏🏽
Its my daytona charger the top part of the rod was connected to the black plastic piece of the lower grille and it came off how do i put it back in place do i just twist the top part or what? Please help me out haha
Ive never had that happen but im sure you can just screw it back on unless its stripped.
@@Srtfiedofficial the bottom part is still on strong its just the top part came off, how you screw it back on the tip of it always has me confused
You have to disconnect it from the bottom and manually twist it on and then reattach at the bottom.
@@Srtfiedofficial yea idk how to do that my boy installed the splitter and rods for me
Well if he did it like i did in the video then just follow the video but do everything in reverse🤷🏽♂️
What splitter is that where did you prefer it
Its a true forged carbon front lip from carmarka
@@Srtfiedofficial thanks do you know anyone making that in satin black
Yea just google search it! There’s plenty of front lip designs and websites that sell them
@@Srtfiedofficial thanks
@@Srtfiedofficial hey how has it held up daily driving
What’s the front splitter called ?
Front splitter or lip
@@Srtfiedofficial but where did you get it sorry lol should’ve worded it better
@@Srtfiedofficial I can’t find this one online that’s why I was asking
@@albertmarquez254 carmarka.com
Ah ok, yea it was a long time ago but if you go to my initial install video of it i listed it in my video where i got it
I’ll pay you to do this for me😅
Lmao OK. DM me on IG
Would have looked better towards the middle… more noticeable.
Ive never like the look of them being more towards the middle. I prefer the clean and more subtle look when it comes to mods.
Bronze
💯👌🏽