Replacing the fuel filler flap locking motor on a 2008 Saab 9-3 Sport Combi
ฝัง
- เผยแพร่เมื่อ 24 ก.ค. 2021
- In this video, I replace the fuel filler flap locking motor / solenoid. This was necessary because the old motor did not open all the way, which meant I'd always struggle to pry the flap to open when I needed to get gas. The whole ordeal was easier than expected, so if you have the same problem, I definitely feel replacing it is doable.
Part numbers:
- Fuel filler flap locking motor: 12786283
Tools needed:
- Torx 20, 25 and 30 screwdriver
- 10 millimeter socket + ratchet
- Small screwdriver
- Ideally, a car trim removal tool
Credits:
- Intro music: Hologram by Bobby Richards
Closing notes:
As much as I think that working on your car is both great fun and very cost-effective, any work you do on your car is at your own risk. Please work safely - I've been saved by good safety equipment more than once. Don't do stupid things - don't work under a car supported only by a jack, don't use sharp tools without protective gloves, and do get yourself a nice pair of safety goggles. - ยานยนต์และพาหนะ
Thanks Roy 🚘 Very good video that helped me a lot. You showed all the details.