This is a sweet layout you have. Always wanted to put a train with my slots. Love it! Gave you a sub! Look forward to seeing more! Great job on the crossover! Race On!
Awesome. I did something similar years ago with my ho life like sets. I cut a slot in the car track then i heated the train track and melted it into the car track. Then i used black gasket maker to fill in the space between the two to keep them from making contact with each other. You have an awesome setup.
When I was young, I thought those HO slot car combination sets were really sweet! I never did have one. At the time, I didn't have the knowledge or skills to do what you did - I barely have any knowledge or skills now. Ha ha. I'm actually surprised that the two manufacturers don't get together and make a set in 1/48 with Lionel trains and Carrera cars.
Double the fun. Fail to understand why more folks don't do this or even why the slot car track companies do not make and offer a factory made crossing piece. A couple past HO companies did. I'm thinking about try to do it with G Scale and Scalextric Slot Car Track. Please share more as things develop and improve.
This is awesome. Since the right track shorted out, is there a way to wire it so the cars in the different lanes would travel in the opposite direction? I had an idea like this, and love the fact that you made it work!!!! I don't think I would be brave enough to have the slot car track cross my train tracks, however. Kudos for your bravery and creativity!!!!
Putting a capacitor across the motor might help with jerking. And are you going to use a relay to cut power. To car track as train. Approaches crossing.
I think a relay to cut power to the slots when the train approaches is the only option besides making a dead spot on the slot track about a 1/2" out from the 3-rail.
I really enjoy them. I've taken the magnets out of my cars - so they'll slide around a little. I treat the tires with WD40 to soften them up - otherwise they get no traction without the magnets. Thanks for commenting!
What happens if cop car stops in front of the train? Do you think you could recreate Dealy Plaza Kennedy assasination with tramps on train track escape?
Slow down the Train speed so you can just barely make 2 car laps at the crossing. And hopefully at that train speed the train will just be clear of the road crossing when completing the 3rd lap with the car, and now the next 2 car laps must be faster than before because you started after the train length rather than before.
This is a sweet layout you have. Always wanted to put a train with my slots. Love it! Gave you a sub! Look forward to seeing more! Great job on the crossover!
Race On!
Good work, Rome wasn't built in a day.
You're a smart dude, Brent! Nice crossing and tie prints. But, a car/train accident is a must see😁
Thank you very much! Here you go... th-cam.com/video/yXyjkZ3ax48/w-d-xo.html
Love the concept, all you need now is to put those operating crossing gates yet get the other lane on the racetrack working right 👍👍
I thought about some of those crossing gates! and I think I have an idea about getting the track to work right. Thanks for commenting!!
Awesome. I did something similar years ago with my ho life like sets. I cut a slot in the car track then i heated the train track and melted it into the car track. Then i used black gasket maker to fill in the space between the two to keep them from making contact with each other. You have an awesome setup.
When I was young, I thought those HO slot car combination sets were really sweet! I never did have one. At the time, I didn't have the knowledge or skills to do what you did - I barely have any knowledge or skills now. Ha ha.
I'm actually surprised that the two manufacturers don't get together and make a set in 1/48 with Lionel trains and Carrera cars.
Great vidio, tried this great idea but i tried it using the fastrack as the base. Bad idea.. this looks much better ... Thanks for the coffee...
Thanks! I thought the fastrack would be a lot harder to do than the tube track. 👍🚂
Good Job!!
Thanks!
Double the fun. Fail to understand why more folks don't do this or even why the slot car track companies do not make and offer a factory made crossing piece. A couple past HO companies did. I'm thinking about try to do it with G Scale and Scalextric Slot Car Track. Please share more as things develop and improve.
I love it. Make a Patten and make it the New Brent train house (BTH) accessory line.
Thank you! I like the way you're thinking 🏎🚂
Good work, hope you can get the other lane working fine
That's the plan! I almost got it fixed... I think. Thank you!
This is awesome. Since the right track shorted out, is there a way to wire it so the cars in the different lanes would travel in the opposite direction? I had an idea like this, and love the fact that you made it work!!!! I don't think I would be brave enough to have the slot car track cross my train tracks, however. Kudos for your bravery and creativity!!!!
Thank you for commenting! Slot cars and trains are fun!🏎️🚂
Nice work, Brent! How did you come up with the various size curves to print out, if you don't mind me asking? Thanks. T4
Thanks T4! I have some videos of "the making", but I still have to edit them. I'll show how I did the curves in that video.
Putting a capacitor across the motor might help with jerking.
And are you going to use a relay to cut power. To car track as train. Approaches crossing.
I think a relay to cut power to the slots when the train approaches is the only option besides making a dead spot on the slot track about a 1/2" out from the 3-rail.
Good job
Neat Brent.
Nice
Thank you!
I was thinking of doing something similar with the carrera go cars
I really enjoy them. I've taken the magnets out of my cars - so they'll slide around a little. I treat the tires with WD40 to soften them up - otherwise they get no traction without the magnets. Thanks for commenting!
What happens if cop car stops in front of the train? Do you think you could recreate Dealy Plaza Kennedy assasination with tramps on train track escape?
Slow down the Train speed so you can just barely make 2 car laps at the crossing. And hopefully at that train speed the train will just be clear of the road crossing when completing the 3rd lap with the car, and now the next 2 car laps must be faster than before because you started after the train length rather than before.
Scalextric racing cars?
No, they are Carrera "Go" 1:43 scale slot cars.
Hi! I made it 51 seconds in! BORING!!!!!!!!!!!!