Blue robotics was my first choice for underwater drones but out of my budget. After building my own ROV that was cumbersome I looked at new technologies. Regrettably, I purchased the Powervision powerray as they had all the bells and whistles in one package. Should have stuck with my original choice!
Hi Ian, it's a bit of everything. The analog electronics to filter the signal are pretty high-end and expensive. There are a lot of other parts that add up like the motor, transducer, microcontroller, and case. The process to build it is fairly involved, especially with the oil-filling of the transducer head. And last, there's a lot of R&D time and effort that went into this. We've been working on it for more than two years to finally get to a finished product! I hope that answers your question! -Rusty
Great job! Is there a mode where it is possible to scan only in a specific direction and for a specific aperture? For instance +/-45° in the forward direction, in order to have a better refreshment rate in front of the ROV? In addition to the better refreshment rate, it could also improve the "image" quality, for there will be more signal in that case.
Hi Timothe, yes! There is a "sector" scan mode where you scan less than 360 degrees. There's an example of this in the video at 2:00 showing just a 120 degree sector looking forward. The view in the Ping Viewer changes to show that sector as large as possible for the best image.
Hi Camille, this sonar will only work underwater, unfortunately! There are other technologies to see through the earth such as ground penetrating radar.
Excellent work, looks promising. I would like to know what is the "frame rate" at both 360 and 120 degrees? or which are the options? I could not find that info on the specs.
Hi Gerardo, a few people have asked this so we'll have it on the documentation soon. A full 360 degree circle takes about 8 seconds at short range and we are working on software updates that will get that to 4-5 seconds.
Hello, I need sample python code for ping360 to learn how to use it. i actually need python code to return distance information according to my angle. thank you
@@BlueRobotics i tried with both vs2017 and qt creator , each time i try to run it it says that the executable file is missing. is there any help you guys can do? i followed your bild instructions
Nice work Blue Robotics! Always up to something great over there!
Thanks for the information. Blue Robotics is at the top of the food chain.
Blue robotics was my first choice for underwater drones but out of my budget. After building my own ROV that was cumbersome I looked at new technologies. Regrettably, I purchased the Powervision powerray as they had all the bells and whistles in one package. Should have stuck with my original choice!
It sounds great! Congratulation!
Had 360 degree sonar transducer ?
Dose it have an ARS (altitude reference system)?
Out of curiosity what is the part that costs so much? R+D, the transducer, or the control electronics?
Hi Ian, it's a bit of everything. The analog electronics to filter the signal are pretty high-end and expensive. There are a lot of other parts that add up like the motor, transducer, microcontroller, and case. The process to build it is fairly involved, especially with the oil-filling of the transducer head. And last, there's a lot of R&D time and effort that went into this. We've been working on it for more than two years to finally get to a finished product! I hope that answers your question! -Rusty
@@BlueRobotics Thanks, keep up the great work!
ISS360과 비교시 성능과 해상도(탐지능력)은 어느정도 차이가 있나요??
Great job!
Is there a mode where it is possible to scan only in a specific direction and for a specific aperture? For instance +/-45° in the forward direction, in order to have a better refreshment rate in front of the ROV? In addition to the better refreshment rate, it could also improve the "image" quality, for there will be more signal in that case.
Hi Timothe, yes! There is a "sector" scan mode where you scan less than 360 degrees. There's an example of this in the video at 2:00 showing just a 120 degree sector looking forward. The view in the Ping Viewer changes to show that sector as large as possible for the best image.
can it workin dryland to locate burried objects?
Hi Camille, this sonar will only work underwater, unfortunately! There are other technologies to see through the earth such as ground penetrating radar.
Excellent work, looks promising. I would like to know what is the "frame rate" at both 360 and 120 degrees? or which are the options? I could not find that info on the specs.
Hi Gerardo, a few people have asked this so we'll have it on the documentation soon. A full 360 degree circle takes about 8 seconds at short range and we are working on software updates that will get that to 4-5 seconds.
Hello,
I need sample python code for ping360 to learn how to use it. i actually need python code to return distance information according to my angle.
thank you
hi how to start your app without installing?? what i meant is after cloning from github
Hi there! You can find build instructions here: docs.bluerobotics.com/ping-viewer/build-instructions/
@@BlueRobotics i tried , im using qt creator 5.12.10 and i'm having trouble with building the app. any help?
@@BlueRobotics i tried with both vs2017 and qt creator , each time i try to run it it says that the executable file is missing. is there any help you guys can do? i followed your bild instructions
@@BlueRobotics and in your build instructions you guys told only to use qt 5.12 but in the latest one you guys are using 5.15.
Must have