your tutorial don't have any circuit diagram can you provide the circuit diagram and pcb files? like if i have to add this circuit in AC/TV, you give your circuit with power by 5V. but in my case the circuit is ac/tv is connected to 220V what should we do then make a smps circuit that can convert 220V to 5V??? because in my circuit their is only one input which is direct ac?
In this PCB I have combined two circuits which I have already explained in my previous videos. Please refer the following videos: Control FAN and LIGHT using TV Remote and Arduino th-cam.com/video/QSpc1KMezOQ/w-d-xo.html How to Control room Lights Fan with Bluetooth and Android th-cam.com/video/xp2B9EbJsRM/w-d-xo.html
bro.. please make this project with AC fan speed control..I think it will be very good then.I have been searching for such projects on TH-cam for a long time but I can't find them.thank you for this project...
Pls reply fastly bro as I am truly trusting you and your channel.once check the circuit diagram and reply.i think the diagram is correct you please tell whether the circuit diagram will work for the home automation project PCB which operates with Bluetooth and ir remote.
I am not asking the PCB.i have that.but I am asking to connect the 2 way switches to the PCB which has relays.so that,we can on with it remote and Bluetooth and off with 2 way switch.pls keep the circuit diagram according to this.but not the PCB circuit as you shown in the video
You can connect any Ac load like fan, tube light etc across NO and COM terminal off the relay. But please take proper safety precautions while working with high voltage
In my upcoming home automation project I have included many more features & auto control with LCD display. Video will be published within February. Please subscribe to get notified. Thank you.
Pls share the circuit diagram in this comments. So please send me today or max. tomorrow. As I have to buy the extra components according to the circuit diagram.pls share as fast as possible.
As I have stopped in the case of installation.so please send me the circuit diagram which is the connection of PCB relays with 2 way switches i.e, NO,COM,NC. so that we can on either with Bluetooth or ir remote and off with 2 way switch pls make a circuit diagram according to this and share as fast as possible .Tq bro Pls share the circuit diagram in this comment box.so please send me today or max. tomorrow. But send as fast as possible.pls reply
yes. you can also make the circuit on a breadboard. please refer to the following videos. Control FAN and LIGHT using TV Remote and Arduino th-cam.com/video/QSpc1KMezOQ/w-d-xo.html How to Control room Lights Fan with Android Mobile th-cam.com/video/xp2B9EbJsRM/w-d-xo.html
In this PCB I have combine two circuits which I have already explained in my previous videos. Please refer the following videos: Control FAN and LIGHT using TV Remote and Arduino th-cam.com/video/QSpc1KMezOQ/w-d-xo.html How to Control room Lights Fan with Bluetooth and Android th-cam.com/video/xp2B9EbJsRM/w-d-xo.html
In this PCB I have combine two circuits which I have already explained in my previous videos. Please refer the following videos: Control FAN and LIGHT using TV Remote and Arduino th-cam.com/video/QSpc1KMezOQ/w-d-xo.html How to Control room Lights Fan with Bluetooth and Android th-cam.com/video/xp2B9EbJsRM/w-d-xo.html
For complete project details (circuit + Arduino code) visit ► easyelectronicsproject.com/arduino/arduino-control-relay-module-with-bluetooth-ir-1/
I want this project I m ready to purchase
your tutorial don't have any circuit diagram can you provide the circuit diagram and pcb files? like if i have to add this circuit in AC/TV, you give your circuit with power by 5V. but in my case the circuit is ac/tv is connected to 220V what should we do then make a smps circuit that can convert 220V to 5V??? because in my circuit their is only one input which is direct ac?
No push button IR with bluetooth direct to Tu to Bluetooth circuit diagram with code
Is there a project write up for this ?
Thank you so much Brother 🔥
Can you make the same circuit (which is operated by ir remote and Bluetooth ) which can also control manually (switches)
Excellent project Sir
Thanks
Did you design the PCB layout and send it for production or it is readymade available?
Super project 👍
Thanks 😊
In this PCB I have combined two circuits which I have already explained in my previous videos. Please refer the following videos:
Control FAN and LIGHT using TV Remote and Arduino
th-cam.com/video/QSpc1KMezOQ/w-d-xo.html
How to Control room Lights Fan with Bluetooth and Android
th-cam.com/video/xp2B9EbJsRM/w-d-xo.html
But you didn't show the push button wiring diagram
Bush button wiring is main thing to combine both right
Thanks for sharing this video....
well, describe and it's a helpful video....
Thanks for your feedback 😊
Although if four home appliances are connected and on for about 1 to 2 weeks??
bro aap ae circuit de sakte ho kya..? pcb printing krke.?
When connected to home appliances and use them continuously will the PCB get heated?can we use for atleast 2 months without getting heated.
What is the software in laptop allows you open on that one
bro.. please make this project with AC fan speed control..I think it will be very good then.I have been searching for such projects on TH-cam for a long time but I can't find them.thank you for this project...
So tq for your project And please provide me a circuit diagram of the circuit which can be operated also with switches
What about continuity?time it works without heating is how much?will it be min 2 months .pls reply
Sir can we use atmega328p microcontroller in place of Arduino nano?????
Is also kept coolant fan for the PCB box so that the heat produced will be passed out.is it true.
coolant fan not required.
Pls reply fastly bro as I am truly trusting you and your channel.once check the circuit diagram and reply.i think the diagram is correct you please tell whether the circuit diagram will work for the home automation project PCB which operates with Bluetooth and ir remote.
Need this done for my home gadgets in mumbai, can u help pl.?
I am not asking the PCB.i have that.but I am asking to connect the 2 way switches to the PCB which has relays.so that,we can on with it remote and Bluetooth and off with 2 way switch.pls keep the circuit diagram according to this.but not the PCB circuit as you shown in the video
Awesome bro
Thanks
I connected it to led bulb and its working.can we connect directly to fan and tube light?Or should make any changes?
You can connect any Ac load like fan, tube light etc across NO and COM terminal off the relay. But please take proper safety precautions while working with high voltage
Can we connect this circuit to TV and Set up box
What app you used for design pcb board
Dip trace
Can u make alexa
very nice
How many months will the durability
Pls reply that the circuit diagram is correct or not.if not please share your's.
Sir what is the capacitor voltage?
excellent work sir. Sir do you have the same circuit functionalities with an LCD display?
In my upcoming home automation project I have included many more features & auto control with LCD display. Video will be published within February. Please subscribe to get notified. Thank you.
Does there is a problem with a big or costly tv???
Sir how to program this arduino nano
how if without using switch from IR to Bluetooth?
I have done and I succeed but I have connect this circuit which can be operated also with switches
Pls share the circuit diagram in this comments. So please send me today or max. tomorrow. As I have to buy the extra components according to the circuit diagram.pls share as fast as possible.
How to purches complete project and what is price the prodect
u can buy the components at electronicscomp.com
could you please help me with the connectors, what are the connectors?
No push button to ship IR with bluetooth only IR with bluetooth combine circuit code please
Sir Arduino uno me sketch sahi se kaam nahi kr rha h
Where are you from??? By the way good video!!!
India. Thanks
@@TechStudyCell Good work.Do some projects using PIC microcontrollers
On continuous use does it gets heated???
No
How much load connected please reply bro
Max 250V AC 7Amp
Plz make video without push button but work both.
Can I use Atmega 328 place of arduino neno ?
Yes. But you have to connect all the digital pin accordingly. And choose Arduino uno while uploading the sketch.
Thanks for reply.
Plz give circuit diagram. How to select ir or blue tooth ?
Plz reply..... Bro
Please check description
Please make a video or please explain how to connect so that I can do it
Great ... How to connect additional devices
Thanks. Which device you to connect...
Sir gerber file mobile me open nahi ho rahi
Please help
Manual control should be done to the above circuit
Thank you sir
I have required only this designed pcb , please send me price
Rs 300
Please send me your contact details, iam ready to purchase
Please email your address at connect.techstudycell@gmail.com
I have stopped the project in the middle due to this doubt.please clarify fastly.Tq
I will prepare a circuit diagram and share with you.
As I have stopped in the case of installation.so please send me the circuit diagram which is the connection of PCB relays with 2 way switches i.e, NO,COM,NC. so that we can on either with Bluetooth or ir remote and off with 2 way switch pls make a circuit diagram according to this and share as fast as possible .Tq bro
Pls share the circuit diagram in this comment box.so please send me today or max. tomorrow. But send as fast as possible.pls reply
hi u make cen plz fam dimmar with toch
Sir Circuit diagram send kr dijiye
Please
Project banana
Sir,I Create a app of remote to control relay board by HC05, I want to relay should be ON only till button is pressed as button release is should be off , but it is ON even after release the button. So I create stop button. But I want to make system that when button is pressed RELAY become ON as button release is should be off.
What should change?
#include
SoftwareSerial mySerial(10, 11); //Pin10 RX , Pin 11 TX connected to--> Bluetooth TX,RX
#define Lamp1 2
#define Lamp2 3
#define Lamp3 4
#define Lamp4 5
#define Lamp5 6
#define Lamp6 7
#define Lamp7 8
#define Lamp8 9
//If Out to active Low change ON 0 and OFF 1
//If Out to active High change ON 1 and OFF 0
#define ON 0
#define OFF 1
char val;
String statusLamp1,statusLamp2,statusLamp3,statusLamp4,statusLamp5,statusLamp6,statusLamp7,statusLamp8;
void setup() {
pinMode(Lamp1,OUTPUT);digitalWrite (Lamp1,OFF);
pinMode(Lamp2,OUTPUT);digitalWrite (Lamp2,OFF);
pinMode(Lamp3,OUTPUT);digitalWrite (Lamp3,OFF);
pinMode(Lamp4,OUTPUT);digitalWrite (Lamp4,OFF);
pinMode(Lamp5,OUTPUT);digitalWrite (Lamp5,OFF);
pinMode(Lamp6,OUTPUT);digitalWrite (Lamp6,OFF);
pinMode(Lamp7,OUTPUT);digitalWrite (Lamp7,OFF);
pinMode(Lamp8,OUTPUT);digitalWrite (Lamp8,OFF);
mySerial.begin(9600);
Serial.begin(9600);
}
void loop() {
if( mySerial.available() >0 ) {
val = mySerial.read();
Serial.println(val);
}
if( val == '1' ) {
digitalWrite(Lamp1,ON); statusLamp1="1"; }
else if( val == '2' ) {
digitalWrite(Lamp2,ON); statusLamp2="2"; }
else if( val == '3' ) {
digitalWrite(Lamp3,ON); statusLamp3="3"; }
else if( val == '4' ) {
digitalWrite(Lamp4,ON); statusLamp4="4"; }
else if( val == '5' ) {
digitalWrite(Lamp5,ON); statusLamp5="5"; }
else if( val == '6' ) {
digitalWrite(Lamp6,ON); statusLamp6="6"; }
else if( val == '7' ) {
digitalWrite(Lamp7,ON); statusLamp7="7"; }
else if( val == '8' ) {
digitalWrite(Lamp8,ON); statusLamp8="8"; }
else if( val == '9' ) {
digitalWrite(Lamp1,ON); statusLamp1="1";
digitalWrite(Lamp2,ON); statusLamp2="2";
digitalWrite(Lamp3,ON); statusLamp3="3";
digitalWrite(Lamp4,ON); statusLamp4="4";
digitalWrite(Lamp5,ON); statusLamp5="5";
digitalWrite(Lamp6,ON); statusLamp6="6";
digitalWrite(Lamp7,ON); statusLamp7="7";
digitalWrite(Lamp8,ON); statusLamp8="8";
}
else if( val == 'A' ) {
digitalWrite(Lamp1,OFF); statusLamp1="A"; }
else if( val == 'B' ) {
digitalWrite(Lamp2,OFF); statusLamp2="B"; }
else if( val == 'C' ) {
digitalWrite(Lamp3,OFF); statusLamp3="C"; }
else if( val == 'D' ) {
digitalWrite(Lamp4,OFF); statusLamp4="D"; }
else if( val == 'E' ) {
digitalWrite(Lamp5,OFF); statusLamp5="E"; }
else if( val == 'F' ) {
digitalWrite(Lamp6,OFF); statusLamp6="F"; }
else if( val == 'G' ) {
digitalWrite(Lamp7,OFF); statusLamp7="G"; }
else if( val == 'H' ) {
digitalWrite(Lamp8,OFF); statusLamp8="H"; }
else if( val == 'I' ) {
digitalWrite(Lamp1,OFF); statusLamp1="A";
digitalWrite(Lamp2,OFF); statusLamp2="B";
digitalWrite(Lamp3,OFF); statusLamp3="C";
digitalWrite(Lamp4,OFF); statusLamp4="D";
digitalWrite(Lamp5,OFF); statusLamp5="E";
digitalWrite(Lamp6,OFF); statusLamp6="F";
digitalWrite(Lamp7,OFF); statusLamp7="G";
digitalWrite(Lamp8,OFF); statusLamp8="H";
}
else if( val == 'S' ) {
delay(500); mySerial.println(statusLamp1+statusLamp2+statusLamp3+statusLamp4+statusLamp5+statusLamp6+statusLamp7+statusLamp8+"J"); //delay(500);
val=' ';
}
}
prntscr.com/symsuk
The link for the circuit diagram i.e, the combination of relays and 2 way switches.once check it
how to control fan speed plse add its
In my future home automation project I will try to add this feature. Thank you.
Can I put a wifi module instead of Bluetooth
Which WiFi module you want to use? You have to modify the both circuit and code accordingly
@@TechStudyCell What about nodemcu?
Or please provide a circuit diagram
I want to buy this project.will you sell the project.
Please send me mail to connect.techstudycell@gmail.com
Available for 600/-
Where?
I want to buy
Pls send the link
Totally how much cost all parts
Must be arround 400/- Rupees
Sir Bluetooth work Nehi kar raha
Can we connect it tv
Like other home appliances you can only turn on and off the TV.
hi sir, mujhe 8 relay code chaye tha . ager aap sell karoge toh
Sell kyu? Free me milega. Neeche diya hai.
String voice;
#define relay1 2 //Connect relay1 to pin 2
#define relay2 3 //Connect relay2 to pin 3
#define relay3 7 //Connect relay1 to pin 2
#define relay4 8 //Connect relay2 to pin 3
void setup()
{
Serial.begin(9600); //Set rate for communicating with phone
pinMode(relay1, OUTPUT); //Set relay1 as an output
pinMode(relay2, OUTPUT);
pinMode(relay3, OUTPUT); //Set relay2 as an output
pinMode(relay4, OUTPUT);
digitalWrite(relay1, LOW); //Switch relay1 off
digitalWrite(relay2, LOW); //Swtich relay2 off
digitalWrite(relay3, LOW); //Switch relay1 off
digitalWrite(relay4, LOW); //Swtich relay2 off
}
void loop()
{
while(Serial.available()) //Check if there are available bytes to read
{
delay(10); //Delay to make it stable
char c = Serial.read(); //Conduct a serial read
if (c == '#'){
break; //Stop the loop once # is detected after a word
}
voice += c; //Means voice = voice + c
}
if (voice.length() >0)
{
Serial.println(voice);
if(voice == "*switch on"){
switchon();
}
else if(voice == "*switch off"){
switchoff();
}
else if(voice == "*bulb1 on"){
digitalWrite(relay1, LOW);
}
else if(voice == "*bulb1 off"){
digitalWrite(relay1, HIGH);
}
else if(voice == "*bulb2 on"){
digitalWrite(relay2, LOW);
}
else if(voice == "*bulb2 off"){
digitalWrite(relay2, HIGH);
}
else if(voice == "*fan1 on"){
digitalWrite(relay3, LOW);
}
else if(voice == "*fan1 off"){
digitalWrite(relay3, HIGH);
}
else if(voice == "*fan2 on"){
digitalWrite(relay4, LOW);
}
else if(voice == "*fan2 off"){
digitalWrite(relay4, HIGH);
}
voice="";
}
}
void switchon() //Function for turning on relays
{
digitalWrite(relay1, LOW);
digitalWrite(relay2, LOW);
digitalWrite(relay3, LOW);
digitalWrite(relay4, LOW);
}
void switchoff() //Function for turning on relays
{
digitalWrite(relay1, HIGH);
digitalWrite(relay2, HIGH);
digitalWrite(relay3, HIGH);
digitalWrite(relay4, HIGH);
}
Circuit diagram plz.......
Keep it as fast as possible
How much cost😅😅
Can we make a rc car with it
Will it works really
yes. you can also make the circuit on a breadboard. please refer to the following videos.
Control FAN and LIGHT using TV Remote and Arduino
th-cam.com/video/QSpc1KMezOQ/w-d-xo.html
How to Control room Lights Fan with Android Mobile
th-cam.com/video/xp2B9EbJsRM/w-d-xo.html
Please share Push button wiring diagram
Arduino code is not working
what error? Fist upload the code then connect the HC05
@@TechStudyCell how to add this number into the sketch
Where is code ?....
You can download the code from video description.
Circuit diagram
In this PCB I have combine two circuits which I have already explained in my previous videos. Please refer the following videos:
Control FAN and LIGHT using TV Remote and Arduino
th-cam.com/video/QSpc1KMezOQ/w-d-xo.html
How to Control room Lights Fan with Bluetooth and Android
th-cam.com/video/xp2B9EbJsRM/w-d-xo.html
Pls reply and thank you
Kya aap mere teacher ban sakte ho
Sir mujhe code chahiye tha
Download link for the code already shared in Description
Pus batan not used
Yes. The push button is used to change the mode of the circuit.
Please share push button diagram
Pls reply.Thank you
Hindi bhi bola kro
Pls reply bro
Apka phone nambar milsakta he
you can comment here.. I will reply
Pls reply
Replied...
Circuit diagram
In this PCB I have combine two circuits which I have already explained in my previous videos. Please refer the following videos:
Control FAN and LIGHT using TV Remote and Arduino
th-cam.com/video/QSpc1KMezOQ/w-d-xo.html
How to Control room Lights Fan with Bluetooth and Android
th-cam.com/video/xp2B9EbJsRM/w-d-xo.html
Pls reply
You can refer the following video
th-cam.com/video/7HGqV-qilGY/w-d-xo.html