Excellent work sir dimmer is an essential part of home Automation can you please add that also including eeprom function including Bluetooth. Thanks for sharing excellent project.
good. how many devices might be connect with Alexa echo dot (4th generation) without using 3rd party app. In earlier video which you made , you do not describe regarding.
Bro i tried this and i faced one problem When you switch on the device without connect to the wifi it doesn’t works You have to connect to wifi at least once to start working with it and it shouldn’t be like that. Some times if there is no wifi and the device like you switch off and then on then it doesn’t works until it connect to wifi again Please find a solution for this.
Hi When all the light is on. Should esp32 power down, and power back on again. Will the light on or off? If light remain off after esp32 restart, what need to be done to make sure it goes to previous state after esp32 restart
Great project but can we use google home with this project (blynk+remote+manual+google voice) plz reply fast i need to make this for my college project. I already seen your videos with google home and alexa but there sinric pro is used not blynk.
Hi sir can we use these three options at one? I mean using 1 ( i want you to know are all these option available in one) code we can control this via blynk app, ir remote, and manual cant we ? Dont want to update code for these three option separately ?
Let us assume we use a power supply through 5v smps and my switch1 and switch2 is ON rest are OFF....but when the power supply is cut for sometime and then coming back after few minutes then what is the condition of the switch whether it is ON as previously or it is in default condition?? Please reply
Bro nice work. But can i link the blynk with google assistant using ifttt in this project. Plz reply fast is it possible to connect blynk with ifttt in this same project. And plz tell if codes have to be modify or not
Thanks for sharing, my name is achmad from indonesia. I would like to asked you about the relay, is it fine to use it for long term condition? Cause the relay in only 5v dc, is that fine for covering the AC 220v for using in daily rutine as a switch replacement. Hope you will reply me and give me your suggestion. Thank you sir 👍👍👍
Sir. I want to add 4 led widget in this project to ckeck if my other hardware is getting 3.3 v supply or not... I tried many things but still not getting success. I will be happy if you can help to write code for multiple led widget..
The video that i have wanted for a long time.. thank you sir🙏🙏 The project will be very usefull for me if it has bluetooth with all the controll that it has. If u get some extra time then pls give the code with all of this controll including bluetooth. Thank you again sir..
@Tech StudyCell IR code not work properly....error show to receive ir code on pin no 35 plz solve this problem other both code blynk & switch are run properly.. Error is "The function decode(&results)) is deprecated and may not work as expected! Just use decode() - without any parameter" plz reply me
Please use the IR receiver with metallic case. Still if the HEX code not printing in the Serial monitor, then check for any loose connection. If you use jumper wires then solder it with the IR receiver. please ignore the line "The function decode(&results)) is deprecated and may not work as expected! Just use decode() - without any parameter".
@@TechStudyCell IR code not work properly....error show to receive ir code on pin no 35 plz solve this problem other both code blynk & switch are run properly.. Error is "The function decode(&results)) is deprecated and may not work as expected! Just use decode() - without any parameter"
@Tech StudyCell IR code not work properly....error show to receive ir code on pin no 35 plz solve this problem other both code blynk & switch are run properly.. Error is "The function decode(&results)) is deprecated and may not work as expected! Just use decode() - without any parameter"
I have tried this but my IR remote is not working , all other parameters are working fine This problem I got with ESP8266 also, Pl advise. Also can you supply me PCB for this ESP 32 project. How much I should pay you? I like your voice and over all presentation very much. I am a retired Electrical Engineer with Industry & teaching background
@@TechStudyCell hi brother.. I installed Ace button library but problem persists. I am using Arduino droid on Android to compile and upload the code. Is it why I am getting this error??
Could you please explain how to do with the blynk? the blynk was updated and now it's different. aid
Your videos are awesome. I have one doubt i.e,Can we connect to Epson projector as one of the appliance.
Pls reply bro.
Yes
You can use any device which uses an AC supply
@@ultimateaquatics9114 ok tqsm
request to modify the circuit to include Eprom and also timer to schedule ON/OFF
once wifi disconect from esp 32 it can not reconnect again,after reset the power it can connect with network also ir system not working some time
Sir can you please help me to add some additional features like shedule time and timer looping
Great Sir,,, please add with Bluetooth... And epprom laibery..
Bluetooth + WiFi watch this video th-cam.com/video/ifKMi-3uf9Q/w-d-xo.html. I will try make (Bluetooth + IR + Manual) in future. Thanks
@@TechStudyCell Please make 4-in-1 Bluetooth +WiFi+IR remote+Push Button
I have ESP 01 module, how to make this project for using esp 01 module and Arduino
Sir can we do the same with esp8266? Plz ans.
Home electronics are always a wiz for some home management works.
is it possible to use ldr control in place of ir sensor to control all leds
Please create a tutorial where fan dimmer circuit is automated. Please also make a video control using ( wifi + bluetooth + ir remote + manual button)
Fan speed controller may take time. currently, I don't have setup for testing the circuit. Thanks.
If Wifi is disconnected than it has to be manual reset, please amend code to reconnect automatically
Excellent work sir dimmer is an essential part of home Automation can you please add that also including eeprom function including Bluetooth. Thanks for sharing excellent project.
Fan speed controller may take time. currently, I don't have setup for testing the circuit. Thanks.
Please upload a video how to soldering all the components into circuit
excellent excellent and fantastic DIY video of 2021 Bravo
Thanks
good. how many devices might be connect with Alexa echo dot (4th generation) without using 3rd party app. In earlier video which you made , you do not describe regarding.
what is the code to add extra Bluetooth here
Bro i tried this and i faced one problem
When you switch on the device without connect to the wifi it doesn’t works
You have to connect to wifi at least once to start working with it and it shouldn’t be like that.
Some times if there is no wifi and the device like you switch off and then on then it doesn’t works until it connect to wifi again
Please find a solution for this.
Hi
When all the light is on.
Should esp32 power down, and power back on again. Will the light on or off?
If light remain off after esp32 restart, what need to be done to make sure it goes to previous state after esp32 restart
Great work brother ❤️ very useful one
Thanks
Can we use this code for esp8266
Excellent bro. Love from west bengal
Thank you so much
You have 220 volts AC____bulbs connected to the output of the relay I want to connect WS2812B___ 5 volts DC is this possible ?
muito bom meu amigo parabens!
uma duvida: como usar um display lcd nas portas I2c (21 e 22)?
Can you make the same video with Nodemcu with 4ch relay ???
Great project but can we use google home with this project (blynk+remote+manual+google voice) plz reply fast i need to make this for my college project. I already seen your videos with google home and alexa but there sinric pro is used not blynk.
Hi sir can we use these three options at one? I mean using 1 ( i want you to know are all these option available in one) code we can control this via blynk app, ir remote, and manual cant we ? Dont want to update code for these three option separately ?
super work to learn with u dear brother .
Glad to hear that
Bro, In blynk app , there is no option for virtual pin V4 v5 and all, only v0- V3 available.
A very good project 👍
Many thanks
Can we use Capactive touch sensor module instead of push button switches
Is it possible to configure automation control via wifi , bluetooth , IR , manual and timer scheduler together in same kit with ESP32
Awsome Video, Please make a video for ESP8266 with same Functions,
and please explain how the code works and how to modify it. thankyou...
Sir, can you make a tutorial video on how to create Bluetooth switch apps in MIT apps inventor?
Hi sir I compiled this program arduino droid to android apk but sketch not compiled error show button1Hendler problem please help
How can we amend the project to choose the Wi-Fi network from the phone
Excellent bro.
Hila dila
Thanks nicely explaining it. why you are not using ESP826 board for this project? any specific reason?
For 3 relays you can go for NodeMCU ESP8266.
@@TechStudyCell how many relays control in NodeMCU? Can we use IR remote system in NodeMCU?
Please add pinstatus storing feature to regain the same pin status after reboot
At the time of compiling (Variable or field 'blynkwidgetwrite1'declared void error )Showing ,kindly suggest anyone help to fix this
Can you plz show me ........how can I connect 9V battery to the relay module.....I m making this project using relay module but it is not working
Is it possible to replace that relay with a pwm controller?
Can you please do the water level senor by using nodemuc and ultrasonic sensors?
Noted
Sir please make a video for 8-channel with (Google assistant+manual+blynk)
Noted
blynk library add krne pr ye error aa rha h----
Specified folder/zip file does not contain a valid library
Let us assume we use a power supply through 5v smps and my switch1 and switch2 is ON rest are OFF....but when the power supply is cut for sometime and then coming back after few minutes then what is the condition of the switch whether it is ON as previously or it is in default condition?? Please reply
Default. All switch off
Then sir there is any solution to restore the previous condition??
Super awesome bro ❤️❤️❤️
Thanks
the main part is code and you should explain it if you know the how code works except changing credentials
kya me eps32 ki jagah esp8266 use kr sakti hu
Bro nice work. But can i link the blynk with google assistant using ifttt in this project. Plz reply fast is it possible to connect blynk with ifttt in this same project. And plz tell if codes have to be modify or not
Awesome and very useful video thank you
You are welcome
Pls upload vedio, by using 16 module relay, control with ir, blink, manual
Where did you connected BC547 transistor?
Can i use Another board like nodemcu 8266 1.0 with this code is it work????
Sir plz oprating 3 stepper moter clock and anti clock ways
great work please create system using Arduino and WiFi module ESP01 | with Bluetooth & Manual control 16 Relay
you can check out this video th-cam.com/video/mZrQpLq0KMk/w-d-xo.html
Can you please add lamp dimmer in this project.
Sir can I use nodemcu esp8266 same project
hey, can you please do this project with new blynk 2.0?
Already done: Video link: th-cam.com/video/Vgyj3cCAioI/w-d-xo.html
@@TechStudyCell adamsin reisss
Can we
operate 16 relays in esp32 using wifi, bluetooth, IR
Thanks for sharing, my name is achmad from indonesia. I would like to asked you about the relay, is it fine to use it for long term condition? Cause the relay in only 5v dc, is that fine for covering the AC 220v for using in daily rutine as a switch replacement. Hope you will reply me and give me your suggestion. Thank you sir 👍👍👍
Great sir👍👌
thanks
Sir project is great i also watched your eso32 pwm demmer project
Can u add it for one rely in this project
What app used for circuit design
Sir. I want to add 4 led widget in this project to ckeck if my other hardware is getting 3.3 v supply or not...
I tried many things but still not getting success. I will be happy if you can help to write code for multiple led widget..
For now i am using pin 34 for input just to check if my led in blynk app glow or not.
good idea super bro keep it up !!!!!!!!!!!!
Nice job sir ye project nodemcu ke sath kar sakte hai and add the rf remote
For 3 relays you can use NodeMCU. will try to make video on it.
@@TechStudyCell ok can't make wifi and rf remote 8 channle relay board please
Can I put Blynk, IR and Sinric Pro on the same NodeMCU?
If so, how?
I have not tried that.
@@TechStudyCell
I tried to mix the blynk and Sinric codes, but there is always a mistake when compiling.
The video that i have wanted for a long time.. thank you sir🙏🙏
The project will be very usefull for me if it has bluetooth with all the controll that it has.
If u get some extra time then pls give the code with all of this controll including bluetooth.
Thank you again sir..
Where is the BC547 transistor is connected?
Is power supply for Esp32 and relay is on the pcb or how
No. I have connected 5V supply to relay module
@Tech StudyCell IR code not work properly....error show to receive ir code on pin no 35 plz solve this problem other both code blynk & switch are run properly.. Error is "The function decode(&results)) is deprecated and may not work as expected! Just use decode() - without any parameter" plz reply me
Please use the IR receiver with metallic case. Still if the HEX code not printing in the Serial monitor, then check for any loose connection. If you use jumper wires then solder it with the IR receiver.
please ignore the line "The function decode(&results)) is deprecated and may not work as expected! Just use decode() - without any parameter".
Hlo sir, This code note support my mobile phone oppo Reno 3 tell me this apps for see
is it posible on arduino mega ethernet shield?? Can you please help me??
Great project sir ir ki jagahpe RF wala banaona
Keep it up bro
Thanks
IR remote program not opening 🤔🤔🤔🤔
Have you downloaded all the codes? What error
@@TechStudyCell IR code not work properly....error show to receive ir code on pin no 35 plz solve this problem other both code blynk & switch are run properly.. Error is "The function decode(&results)) is deprecated and may not work as expected! Just use decode() - without any parameter"
@Tech StudyCell IR code not work properly....error show to receive ir code on pin no 35 plz solve this problem other both code blynk & switch are run properly.. Error is "The function decode(&results)) is deprecated and may not work as expected! Just use decode() - without any parameter"
I need the correct code for IR remote sensor
Sir good morning
Could you please make oxigen conector
How can i use 2 chanel relay
Iski 5pcb kitne price may print ho jye ge indian rupees may batao
Please send email to connect.techstudycell@gmail.com
sir eeprom wala coding use kijiea please power state chahiea
I have tried to include EEPROM. not yet successful.
can i add ir blaster with esp8266
sir Great, its looks very interesting. Can we use NodeMCU in place of ESP32 Dev board ?
Yes. but you can control max 3 relays.
@@TechStudyCell why, I am already controlling 4 relays with NodeMCU and working well..😟
@@mohitparikh4455 great
Can you pls Share the code for nodemcu
is there an esp8266 version of his...
Sir please make TTP223 touch module+ blynk app + RF remote with 8 channel relay
Sir complate pcb leni hain
Please send email to connect.techstudycell@gmail.com
what is the price of the complete PCB board?
Please send email to connect.techstudycell@gmail.com
I have tried this but my IR remote is not working , all other parameters are working fine This problem I got with ESP8266 also, Pl advise. Also can you supply me PCB for this ESP 32 project. How much I should pay you? I like your voice and over all presentation very much. I am a retired Electrical Engineer with Industry & teaching background
Please send a email with your address to connect.techstudycell@gmail.com
Sir pls add 9 step fan regulator and with eeprom function
what about durability?
Sir plz same project with ac fan speed controller
Error variable or field 'button1handler' declared void
Install the AceButton library
@@TechStudyCell hi brother.. I installed Ace button library but problem persists. I am using Arduino droid on Android to compile and upload the code. Is it why I am getting this error??
Maybe. Use Arduino IDE
From where I got this kit
For PCB please send email to connect.techstudycell@gmail.com
How can control fan speed?
Welldone. 🔥👍 Is there timer function available for each load?
Sorry. Question is not clear to me.
error: variable or field 'button1Handler' declared void please help
Install the AceButton library. Select the ESP32 DEVKIT V1 BOARD. Then compile the code.
@@TechStudyCell all code ok but error: variable or field 'button1Handler' declared void
Please help me
Do u have the pcb board for sale
Yes. Please send email to connect.techstudycell@gmail.com
Only thing that is lacking here is the speed control system for fan.
Can you create this project using new blynk 2.0
Yes. Video will be published in this week
@@TechStudyCell Thank you boss
Sir plz i want to make blynk +ir project...plz help me
Sir please create a video of fan speed control using wifi, ir remote and manual.
Fan speed controller may take time. currently, I don't have setup for testing the circuit. Thanks.