@@alexweinstein6417 you need to attain a certain amount of speed (around 80 knots) before you take off with 1 level flaps down. Don't try to pull it, the plane will start flying on its own after attaining the desired speed.
I already set the flight plan, put it on the screen too, turned on the autopilot switched to nav, switched to gps too, turn on the auto pilot and the plane follow another direction which is not even on the gps screen Not the heading direction, i've no idea why
Did you correct your heading indicator? Check the heading indicator. It should pointing to the same direction as your magnetic compass. I also faced this problem and this is how I corrected this.
I was setting the VOR and ILS frequencies to locate the airport and land the airplane. Read about the VOR, this system is used to locate the desired airport. Here, in this app on mobile, you use one finger and two finger tap to adjust the dial. One tap finger and two tap simultaneously will do different tasks.
Wooow 😊can you make a flight plan using this map in cirrusjet pls
Sure I will do that soon. Thanks for the suggestion 🙂
You just helped me to understand a blt more how to do a flight plan thanks !
nice video mate it really helped me a lot
Thank you so much 🙂
@@loveforaviation681 amazing video. How far back do I have to tilt my device in order to get off the ground?
How do you maintain so much control? I can barely look at my gps without my plane doing a barrel roll@@loveforaviation681
@@alexweinstein6417 you need to attain a certain amount of speed (around 80 knots) before you take off with 1 level flaps down. Don't try to pull it, the plane will start flying on its own after attaining the desired speed.
@@amanpreetchander7386 is it the same for flight school? Because I thought you had to tilt your device in order to get off the ground.
Im doing all the steps same like yours but when i press AT and( NAV (GPS)) the plane will change it direction it not gonna follow the flight plan
I think you need to correct your heading indicator. Needs to be adjusted according to the magnetic compass. The direction should be same.
How to do that?@@amanpreetchander7386
Same
@@moonchi3309 while you line up with the runway to take off, make sure your head bug is the same like runway heading
@@Jacob-40 Thank you for help it's worked. Plane is following gps but aeroplane is not aligning with runway during landing do you know why?
I already set the flight plan, put it on the screen too, turned on the autopilot switched to nav, switched to gps too, turn on the auto pilot and the plane follow another direction which is not even on the gps screen
Not the heading direction, i've no idea why
Did you correct your heading indicator? Check the heading indicator. It should pointing to the same direction as your magnetic compass. I also faced this problem and this is how I corrected this.
So if I understand correctly there's no Atlsel in a Cessna 172? You can just get a/p to hold current alt?
It has, you can do that in the autopilot. You need to press the ALT button for that.
Tysm very helpful video!
I am really glad that you found it helpful. Thanks for your comment :-)
How does the tuning of the radio work? I saw you moving stuff, just dont know what you did
I was setting the VOR and ILS frequencies to locate the airport and land the airplane. Read about the VOR, this system is used to locate the desired airport. Here, in this app on mobile, you use one finger and two finger tap to adjust the dial. One tap finger and two tap simultaneously will do different tasks.
There is no narration. Too bad.
I appreciate your concern but this was not intended to be a tutorial.
🤮🤮🤮🤮😂😂😂 en verdad tienes una avioneta yo tengo una airbus a 300 y 300
😂😂😂😂😂😂😂😂😂😂