So glad you made this and the prior video! My DC14 is now 7 years old and I cleaned after watching your videos. I started taking it apart before I found you videos and promptly lost that small spring but was able to use a ballpoint pen spring I cut in half to place behind the grey button! Works great!! Thanks!!
Can you please tell me where to find the 2nd spring that holds the red clip up and under tension. I have a DC65 and lost this when replacing the filter. Great video, super helpful, hope to get my Dyson working again.
Thanks for the video. The springs I am having trouble with are the red part on handle that opens the canister bottom. It won't click into the unit after you close the canister. I can tell the 2 springs are out of place but not sure where they belong? Any tips would be appreciated.🙏🙏
What is the part number for the longer spring mentioned at about the 1min mark? The one that keeps the red canister release thing pushed up? I lost this when cleaning my Dyson.
Hi, how do U replace the red clip attached to the cyclone? Unlike ur footage of the dc40, the clip doesn't come off attached to the spring on this one... I am close to throwing it out of a window!!! Lol! Thanks
While trying to replace the small spring it went flying and unable to locate..so I took a pen apart and cut the spring in half with a wire cutter and it worked! I had to use a needle nose pliers to hold it in place while i snapped the topic place.
Hi there , my apologies for the lateness in my reply . Dyson does offer replacement springs . I can provide you with the part number based on your model if you like . If it’s a DC41 spring the part # would be : DY-965156-01 normally found online for about 5 bucks .
Hello , from what I’ve seen they don’t offer the grey button on the Cannister as a separate part . In the past with parts laying around I have offered to pop one on but may be hard to find online . Replacement part # for the bin itself with the button and spring is : DY-920624-01 new I’ve seen sell online for about 40$ . Hope this helps in some way for anyone out there :)
If i understand correctly , the lid catch at the bottom that keeps all the dirt in the bin if button wont release during disassembly push down on the red lever manually to pop open the dirt lid. If need further explanation let me know :) Thanks for watching
Hello , generally when we rinse the cyclone with water it does more harm than good but may not ruin your unit . The excess water makes mud inside the cyclone which is near impossible to fully clean without disassembly and washing of the parts . Leads to some nasty odors and a more clogged cyclone leaving the unit partially useless . A good servicing would get it running like new .
djclown7pb hello , it is not recommended to wash the cyclone while assembled as dirt and water turn to mud causing further issues due to inadequate cleaning. it is best to have knowledgeable repair tech service Dysons.
Thank you! You saved me. I cleaned my canister and was struggling to put the springs back on, then I found your video, it’s much appreciated.
Glad it helped!
So glad you made this and the prior video! My DC14 is now 7 years old and I cleaned after watching your videos. I started taking it apart before I found you videos and promptly lost that small spring but was able to use a ballpoint pen spring I cut in half to place behind the grey button! Works great!!
Thanks!!
Very helpful video I was able replace the canister release back I had watched other videos that weren't so helpful for me thank you
I think you win the internet for today. I was close to launching this thing off my back deck....and once again youtube saves the day.
Yes, that little spring is very tricky :-) Thanks so much for sharing this video. You saved the day!! :-)
Thank you! this was so helpul.
Can you please tell me where to find the 2nd spring that holds the red clip up and under tension. I have a DC65 and lost this when replacing the filter. Great video, super helpful, hope to get my Dyson working again.
thanks, solved an issue i had with the longer spring holding the tension to function correctly.
Man, you saved my axx today. Thanks
Thanks for the video.
The springs I am having trouble with are the red part on handle that opens the canister bottom.
It won't click into the unit after you close the canister. I can tell the 2 springs are out of place but not sure where they belong?
Any tips would be appreciated.🙏🙏
Is there a place to buy the springs? (Specifically the spring for the red piece.).
What is the part number for the longer spring mentioned at about the 1min mark? The one that keeps the red canister release thing pushed up? I lost this when cleaning my Dyson.
Did you ever find this?
Hi, how do U replace the red clip attached to the cyclone?
Unlike ur footage of the dc40, the clip doesn't come off attached to the spring on this one... I am close to throwing it out of a window!!! Lol!
Thanks
While trying to replace the small spring it went flying and unable to locate..so I took a pen apart and cut the spring in half with a wire cutter and it worked! I had to use a needle nose pliers to hold it in place while i snapped the topic place.
Haha. Thank you for this! I have done the exact same thing.
I love the innovation ! Keep up the good work and let us know if you need any further assistance we offer repairs on all makes and models .
Good information as I have lost the smaller one when cleaning out my Dyson could you tell me the approximate size I would need to order.
Hi there , my apologies for the lateness in my reply . Dyson does offer replacement springs . I can provide you with the part number based on your model if you like .
If it’s a DC41 spring the part # would be : DY-965156-01 normally found online for about 5 bucks .
@@VacTech Hey do you know the part number of the bigger spring?
Do you know of anyplace to get a replacement Silver release button? Mine is worn through and Im not jazzed about buying a complete cyclone unit.
Hello , from what I’ve seen they don’t offer the grey button on the Cannister as a separate part . In the past with parts laying around I have offered to pop one on but may be hard to find online . Replacement part # for the bin itself with the button and spring is : DY-920624-01 new I’ve seen sell online for about 40$ . Hope this helps in some way for anyone out there :)
I have been looking for that part for nearly 2 years. No place to find it or order it. Depressing.
where can I order that gray button and spring?
When I lose that spring for the red release button, how do I find a replacement
Is there any way to do video over and zoom into the area ?
UP20 Ball Animal 2, need part numbers for the LARGER spring
How do you remove bottom catch that the release button presses on to empty bin?
If i understand correctly , the lid catch at the bottom that keeps all the dirt in the bin if button wont release during disassembly push down on the red lever manually to pop open the dirt lid.
If need further explanation let me know :)
Thanks for watching
I cleaned this with water. Did I ruin it?
Hello , generally when we rinse the cyclone with water it does more harm than good but may not ruin your unit . The excess water makes mud inside the cyclone which is near impossible to fully clean without disassembly and washing of the parts . Leads to some nasty odors and a more clogged cyclone leaving the unit partially useless . A good servicing would get it running like new .
can I just wash it? with out taking it apart?
djclown7pb
hello , it is not recommended to wash the cyclone while assembled as dirt and water turn to mud causing further issues due to inadequate cleaning. it is best to have knowledgeable repair tech service Dysons.
djclown7pb no don't it will stink
Anyone know what the dyson part number is for the 2nd large spring that goes on red part? (0:36) I lost mine. :-(
Did you find out what part number it is?
Fran Booth
I hate my Dyson
Same. I regret the purchase every time I drag it out to clean. Cheap plastic piece of junk.
@@AnandaBijoux Same! For half of the price you could just get a Shark Navigator Lift away pro for 199