Upgrade your laser for safety and savings! Trade in any open diode machine for an enclosed xTool and get up to $500 off: bit.ly/3vHLipP If you want to get an additional discount on this xTool P2 or any other machine, use code "VW10" at checkout: shorturl.at/djCL0
You can use the camera-positioning on the P2 to position your work and record the x and y save file open in light burn enter x and y using right as 0-0 on the light burn program like XCS does set height to work piece--I manually measure the Hight in light burn- I stack index cards and slide between the tube and work piece then measure them Z 25 mm might be the top of the knives remove knives to experiment for the Z depth to check and confirm your machines settings- to experiment- burn a shape using XCS record x and y save and open in light burn enter the x and y mine matches up perfect
Stained glass being one of those hobbies I've been meaning to get back to for many years I was very interested in the outcome of your stained glass testing. I could see the laser being a help to doing fast and accurate cuts in stained glass, as you say straight lines it'd easier to measure and score the glass in the traditional way. Curved patterns on the other hand may work out well on the laser, especially with my dodgy score lines. I think I'll dig some glass out and experiment, figuring out new ways of doing stuff is what I enjoy most about lasers and 3d printing.
You can run the P2 with Lightburn, but it lacks all the nice features like autofocus, camera-positioning, etc. But they are working on better P2 support. I guess they got annoyed by me asking every other day. ;-) What I do for now is use LB to create / edit my files, export as SVG and then use XCS to run the laser. I fully agree on the RA2 positioning. It's just annoying that you can't choose the center line.
The polar you can increase the work height with risers on the feet, however you are limited to the space in the bottom of the polar meant for the rotary attachments to sit in.
Awesome review. Thank you! I would love to see more of the autofeed capabilities. I cut wood veneer (currently by hand), and am curious about its ability to cut long strips and fancy shapes in this material. Hand cutting veneers is sooooo tedious.
Thank you! The process of the conveyor is very similar to the conveyor for the S1. Here’s a video where I tested it with the S1: Trying out the xTool Conveyor th-cam.com/video/6FjkUuBV-K8/w-d-xo.html
Thank you so much, Rob. I appreciate the comment. Please let me know if there is anything you'd like to see on this channel going forward. Have a great day.
It's great to see the P2 engraving the inside curve of a bowl or tray. If I took a 8" wide cereal bowl and turned it upside down, could the P2 engrave a 3 inch band with patterns inside the band... on the outside of the bowl's curved surface to about 3 inches up the wall... leaving the 4" wide flat round base untouched? Thank you.
It's going to depend on the curvature of the bowl. There is a tolerance to make sure the tool head does not interfere with the surface, so if it's a fairly shallow profile it should work. Steep profiles will give you an error. Another option would be to use the rotary but you'll have to get creative with how to position it. I hope that helps!
I am waiting for my P2 as I type. I am coming from the S1 as I can see the limitations of the S1. The S1 is still a good choice if you wish to get into Laser Engraving. I have learnt a lot and now it is time to go beyond the 4", sorry I shouldn't have said. Nothig with humour, yes I am from the UK hence the spelling ;-).
Thank you, I just purchased this P2 Laser, I am now waiting for my Riser base to arrive....do you think one day you could etch a glass using the rotating attachment and then how that should look on screen before pressing START!!!
Could you make a video to the air purifyer. I kind of doubt, that I could run the laser in my basement with just that purifyer and no external exhaust... or is it so good?
If you have the riser base there will be some air gaps where it could escape, but without the riser it does a really good job eliminating the smoke exhaust. It’s really a good solution.
For that you’re going to want a fiber laser. A co2 laser can do some metals using marking spray but it’s not going to work on most metals like a fiber laser.
![[LIVE] : ONE ลุมพินี 82 วันนี้!! คู่เอก | ยอดไอคิว vs อับดัลลาห์](http://i.ytimg.com/vi/hSsyTl_9bqs/mqdefault.jpg)
Upgrade your laser for safety and savings! Trade in any open diode machine for an enclosed xTool and get up to $500 off: bit.ly/3vHLipP
If you want to get an additional discount on this xTool P2 or any other machine, use code "VW10" at checkout: shorturl.at/djCL0
You can use the camera-positioning on the P2 to position your work and record the x and y save file open in light burn enter x and y using right as 0-0 on the light burn program like XCS does set height to work piece--I manually measure the Hight in light burn- I stack index cards and slide between the tube and work piece then measure them Z 25 mm might be the top of the knives remove knives to experiment for the Z depth to check and confirm your machines settings- to experiment- burn a shape using XCS record x and y save and open in light burn enter the x and y mine matches up perfect
Very interesting
@@VoeltnerWoodworking would be great if you did a video on this I know others would like to learn it
Stained glass being one of those hobbies I've been meaning to get back to for many years I was very interested in the outcome of your stained glass testing. I could see the laser being a help to doing fast and accurate cuts in stained glass, as you say straight lines it'd easier to measure and score the glass in the traditional way. Curved patterns on the other hand may work out well on the laser, especially with my dodgy score lines. I think I'll dig some glass out and experiment, figuring out new ways of doing stuff is what I enjoy most about lasers and 3d printing.
Awesome. Make sure to come back and let me know how it went. Curious to hear a seasoned stained glass worker’s experience.
You can run the P2 with Lightburn, but it lacks all the nice features like autofocus, camera-positioning, etc. But they are working on better P2 support. I guess they got annoyed by me asking every other day. ;-)
What I do for now is use LB to create / edit my files, export as SVG and then use XCS to run the laser.
I fully agree on the RA2 positioning. It's just annoying that you can't choose the center line.
The RA2 should be an easy fix I think.
The polar you can increase the work height with risers on the feet, however you are limited to the space in the bottom of the polar meant for the rotary attachments to sit in.
Yeah, it’s definitely a little bit more limited but still a good machine.
Awesome review. Thank you! I would love to see more of the autofeed capabilities. I cut wood veneer (currently by hand), and am curious about its ability to cut long strips and fancy shapes in this material. Hand cutting veneers is sooooo tedious.
Thank you! The process of the conveyor is very similar to the conveyor for the S1. Here’s a video where I tested it with the S1:
Trying out the xTool Conveyor
th-cam.com/video/6FjkUuBV-K8/w-d-xo.html
I’m still not exactly sure of the 2 Goldendoodle weight scale. But I have a ruff guess.
HAHAHA! I'll throw you a bone. It's 100/2.
Very informative and well done.
Thank you so much, Rob. I appreciate the comment. Please let me know if there is anything you'd like to see on this channel going forward. Have a great day.
Wow! What a beast! Pretty awesome laser too! Lol
I’m in beast mode. 😂
It's great to see the P2 engraving the inside curve of a bowl or tray. If I took a 8" wide cereal bowl and turned it upside down, could the P2 engrave a 3 inch band with patterns inside the band... on the outside of the bowl's curved surface to about 3 inches up the wall... leaving the 4" wide flat round base untouched? Thank you.
It's going to depend on the curvature of the bowl. There is a tolerance to make sure the tool head does not interfere with the surface, so if it's a fairly shallow profile it should work. Steep profiles will give you an error. Another option would be to use the rotary but you'll have to get creative with how to position it. I hope that helps!
Yes this helps a lot. Thank you for the quick reply! @@VoeltnerWoodworking
Sure thing!
I am waiting for my P2 as I type. I am coming from the S1 as I can see the limitations of the S1. The S1 is still a good choice if you wish to get into Laser Engraving. I have learnt a lot and now it is time to go beyond the 4", sorry I shouldn't have said. Nothig with humour, yes I am from the UK hence the spelling ;-).
That’s great! You’re gonna love the P2!
@@VoeltnerWoodworking I do, to say I am happy with the P2 is an understatement
It's such a great machine. Happy making!
Thank you, I just purchased this P2 Laser, I am now waiting for my Riser base to arrive....do you think one day you could etch a glass using the rotating attachment and then how that should look on screen before pressing START!!!
Awesome! You are going to love this machine. For sure.
Can you save the depth map back to a PC? Heck, I might get one of these to use as a scanner for the cnc carve..
Unfortunately I haven't found the ability to do that. I'd recommend getting a 3d scanner for that type of thing.
Could you make a video to the air purifyer. I kind of doubt, that I could run the laser in my basement with just that purifyer and no external exhaust... or is it so good?
If you have the riser base there will be some air gaps where it could escape, but without the riser it does a really good job eliminating the smoke exhaust. It’s really a good solution.
Would love to discuss more. How could we reach out?
It weighs 1 golden doodle when compared with mine.
Weird flex. 😂
can i engrave on silver or gold ? & also Cutting ?
For that you’re going to want a fiber laser. A co2 laser can do some metals using marking spray but it’s not going to work on most metals like a fiber laser.
4" is a big deal...I see what you did there. 😂
I'm glad someone picks up on my subtle humor. LOL!
@@VoeltnerWoodworking it was the pause that sold it. Well done. Good video too.
Thank you!
4" is a massive deal, it make one hell of difference
Agreed. Lol.