FYI - Since this video was released, Befaco came out with VCMC - an excellent MIDI controller that's also a CV to MIDI module (and can also act as a standalone controller with a mod for USB power)
Since CV to MIDI is relatively scarce, it's worth adding that the original Bass Station Rack has one pair of pitch and gate CV jacks that are bidirectional - you can use them to convert MIDI to CV or CV to MIDI, and they can be used inependently of the actual synth (so you can control the synth itself on one MIDI channel but have the CV i/o running on a different one). Can be set or Hz/volt for interfacing with Korg stuff, too. There's no conversion to/from CC so it's limited but you do get a pretty nice little 90s analog DCO monosynth with a bunch of preset locations and ploychaining as an added bonus.
Digitone's sequencer, effects and FM poly synth are such a great compliment to euro! I run my intellijel 7U setup and pulsar-23 into it and use DT as my command center for transport, clock and sequencing.
Doepfer A-192-2 and the bastl instruments 1983 poly cv/gate to midi are 2 other ones as well. But the polyend is nice. I like. Thank you again for all your videos. Awesome
Does the ES General CV send out the chords it creates over the external midi?. As far as I can see it mirrors everything that is sent to the midi sound generator but i'm wondering if there is extra processing done to create extra midi notes signals for things like the Shepard tones and if these are sent out too. Basically i want use it as a CV-midi for external synths, I'm not that bothered about the internal sound generator and this seems to have more CV input compared to the Doepfer A-192-2. I have an ES-8 so i could use that and the silent way CV-midi then out thru Ableton but i was trying to avoid using the computer for this application
Shuttle Control is also a fantastic module for this purpose. It's outputs can route cc's back to your other hardware gear and the outputs are also configurable in any combo of v/8, gate, trigger, or cc data you want...very handy with digitakt or digitone!
Don't forget about the beautiful Endorphin.es Shuttle control that is extremely flexibel and besides complex midi options can also output white noise, 808 cymbal noise, random voltages etc. on it's many outputs.
Thank you. This was helpful as I am a noob to synths and modular and have a steep learning curve ahead . Would be interested in getting your In-Complete Book of Electronic Music Ideas, Tips and Tricks but not financially able to be a patron due to other committments. Perhaps in the near future.
Nice and instructive video as usual, I'm this channel's fan. 3 nice gears wich involve MIDI and CV: Koma komplex sequencer, DSI Pro 2 and Elektron Analog 4
Thanks so much for confirming for me that midi LFO can be converted to CV. This is just what I was hoping for! With the DN would you just assign an LFO to, say CC1, then convert CC1 to CV in your midi to CV converter? Does anyone know if CV.OCD can perform this?
Is there a way to know if the control voltage you are providing is too much voltage? Like could I use the audio signal from my older Moog theremin to be the CV signal (not equipped with CV out)?
Hi, very nice video ! The best I have seen in this particular field and very helpful to avoid mistakes in building and connecting our synths from two different worlds. I am delighted with the Endorphin.es Shuttle Control, Midi to CV ( 16 channels ) and got presets (16) to launch in the module from a computer (giving a specific role to each one as pitch, gate, tap LFO, Atouch, velocity...) To discover really . But this only one part of the problem isn't ? What about cv to midi ... Philscott
You might want to redo this video. I have a Prophet Rev2 I want to control with eurorack and it looks like there are more options available now. Also the Behringer Neutron has a unipolar LFO output and an attenuator, this works great as an expression pedal controller for most synths
Yes and the reason i like the polyend is for all the outputs. I am looking i to controlling my modular from my mpc live 2 but am having some difficulties. I also have the sl mk3 from novation that i can use. Dont know what to use. I only have 2 separate midi to cv gate mod modules at the moment. That is why that polyend looks like a winner for me. Could you do a deeper dive on it? If you can get some time. Well thank you stay safe
Great video production! Specially for someone like me who would lije to venture into this hybrid modular set-up! What type of eurorack case are you using?
Shouldn’t it be possible to use the midi thru of Digitone in DIN sync mode and then with a midi TRS din adapter plug it directly into Pam’s Workout? That would save you one gate out and potentially gain one more voice channel (e.g. with Yarns).
@@MikkelGrumBovin Yes, it works like a charm. You can first adapt the DIN to TRS and then split it into two mono plugs that you can plug into pams clock and start/stop.
@@chmanie Thats so good thinking, i just got the PEXP-1 - and me.being an olschool bassplayer/guitarist/drummer gone synth/vintage/Euro crazy (i use to play gr300´s and Ibanez Zing in the good ol days aswell)im so deep into the rabbithole , i feel i cant think straight anymore - i love that whole breaking rules, using several sequenzers to trig the same CV lines , polyrythmic tribal triggers , with cross seqv. sounds on the circadian , and triggin perc. with Metropolis - -DivKid and MylarMelodies being my new gurus .... but...i...need...help...both mental and techwise ! ;-)
Hey loopop, im tryna get clock from my beatstep pro into ableton link for aum on my ipad to follow... any ideas? Im using an es-9 for my interface and tried audulus, mirack, cvariant apps. I have a disting mk4, dunno if that can help at all (going from clock to midi clock perhaps? I dont have a breakout tho)
never mind, i was overthinking it. I can use midi link sync app to turn BSP midi clock into live sync and Aum wil follow that... I was hoping there was a software option that would take CV and turn it into link str8 up but all efforts failed.
Cheap one channel CV to MIDI converter. Just want to trigger notes on my Monologue by Mono Station sequencer. Some one, please. I do not want to get rid of my Monologue.
@@loopop well, I can name the in-s and out-s that are available: Volca has a 3.5 mm CV-in, then two 3.5 mm In-sync-Out and a 3.5 mm headphones out Still a problem to understand what to do =(((
Very nice! I guess I tought myself most of this already, but I have a very special problem. I have a Digitakt that sends the masterclock and stop/start to my eurorack via a HERMOD -> Tempi to a René 2.0 which is the controller. The start / stop works great, but The René doesn‘t jump back to position 1, so the beats are in sync with notes, but not with the notes I want. I know that the René can be told to reset its sequence via a CV at the Mod input, but that means I can‘t use that input for other stuff and I don‘t know if the Hermod can Send a start / stop signal just once ... I only know it can send clocks. Is there something I am missing?
Hermod can send clock with restart command at start or stop - -> G1+RESET P to G8+RESET P: Hermod will output a RESET signal on the CV output (together with the clock on the GATE output), helping your modules to keep the sync when PLAY is pressed. - G1+RESET S to G8+RESET S: Hermod will output a RESET signal on the CV output when STOP is pressed.
I'm having trouble getting the cv to midi (midi out using the breakout) to work on the General CV. When I hook the breakout to my Disting mk4, both midi in and midi out work fine and I can control my Minibrute using Channel 1. However, when I hook the breakout module to the General CV, Midi in works (external Midi to cv), but I cannot get Midi out to work. I have upgraded to the latest firmware v1.4 and am using the Programmable mode. I set Note A to Channel 1 and triggered. I even set the Midi Out setting to 1. Is there something else that I need to set?
The Polyend Poly's manual officially says: "Please notice that Poly module Gate outputs are 0-12V (the Eurorack norm is 0-5V)". And then all values are given: • 8 Gate Outputs (0-12V) • 8 Pitch Outputs (0-12V,V/oct.) • 8 Velocity Outputs (0-12V) • 8 Modulation Outputs (0-12V,selectable CC message 0-127 using DIP switch on the back panel) Poly Module play modes. If the Eurorack standard is 0 thru 5 volts, why do they build this thing offside these limits? I have bought it because I've seen youtubers using it on its own within a normal Eurorack. Moreover, the Moog Subsequent 37 is built to Eurorack standard and has 3 CV ins and one gate. Will I destroy it when I connect it to the Poly's outputs? I'm heavily confused now and have to consider returning it to the vendor... What I wouldn't like at all... Any suggestions or explanations? Thanks beforehand!
0-5v is a Doepfer standard, not necessarily for all of 5U eurorack modules. There are many modules that take +/-12v, as this is usually the limit of the power supply itself. Oh I didn't realize this was 2 year old comment haha. Hope this helps someone anyway
@@MikkelGrumBovin I remember that I've sent this question to Moog's support team, and I remember that a supporter named Adam told me that I should not try to make such a connection. He literally advised me not to do this. So, this can be considered a well-educated answer: These devices are not compatible.
i got my dfam then was sorely disappointed i didnt have anything else to patch it with (except my minilogue to sync with it), still havent settled on what to buy , it becomes a bottomless pit for me , id also want to interface with vcv rack .. so is the expert sleepers module the best-cheapest way to go ? or a midi-cv converter (i wish i kept my ancient one that i sold with my korg mono/poly) i have a weird combo of digitakt/dfam/minilogue (and reason for daw)
Two recommendations: Did you see my "why eurorack is awesome" video? I expand DFAM 5 ways there. And yeah also check out my "hybrid modular" video for using ES-8 or a DC coupled interface to bridge to VCV. ES-8 is the best way to go but it's not cheap :/
@@loopop yeah i need to check them out again to mabye spark some ideas , its been a while , and yeah :( i think i need to hold off a bit more before i go full eurotard .. each time i look into that i get lost deciding on a few modules to fit a 60hp rack or something, then it snowballs into something way bigger :):(
I great video. I have the Intellijel uMidi. Its 6 hp and provides Midi to CV along with a clock divider, sequencer sync via run and reset outputs., 0 -10 vpo, gate and trigger outputs and more. Very powerful in a small package. I also have the Squarp Pyramid which has CV/Gate in/out.
So, what are the chances of getting your soothing voice to break down what Midi 2.0 means for us mere mortals and how - if there's any indication yet - it might be adopted by Eurorack etc, given the limits of CV and the resurgence of old school and analog... It seems Midi 2.0 could be a bridge between worlds but also open up a portal to other dimensions? Sorry to stir the Zombies... perhaps its too early to know?
There's a big chance once we see it actually have a practical implementation. Though I could record myself reading the spec and sell that as a sleeping aid tape :)
+1 for the CV.OCD because it’s very flexible and you can carry it everywhere since it’s independently powered. But an obvious, cheaper option (in the sense that it saves you a dedicated midi to cv converter) is a semi modular with midi (0-coast, Microvolt, Neutron). It would do the trick with the advantage of having another source of sounds and modulation. Yes, it offers less flexibility / control than a dedicated converter but it would cover the critical aspects (tempo/rhythm, pitch, and more). Even cheaper - and, of course, more limited - would be a beatstep. BTW, it would be great if the Medusa had, instead of so many pads (Being keyboard-centered I don’t appreciate them other than as samples/percussion triggers, or as a sequencer interface -like in the superb Circuit design-), a modular matrix. It’d be a killer.
I do not get it, why would anyone want to sequence ordinary synths with modular? Modular sequencing capabilities are so far very limited, even with modules like O_C, which are also digital. Quite simple algos that run on expensive hardware. Just use a phone, tablet, pc..
Well, it could let you effectively add an extra LFO or envelope to a standalone synth. Trigger from the standalone sent via midi to the modular, which initiates the generation of a CV curve, which can be converted back into midi as a specific CC message, and routed back into the standalone synth to control some parameter, like filter resonance (which rarely gets a dedicated envelope on a synth), pulse width, waveform etc. EDIT - I realize that my suggestion is for modulation, not sequencing. I think the only reason for that would just be that you happened to already have plenty of modular sequencers, presumably with a sequences that you already built or something. Or just preference of interface. But I agree - modular is a very expensive and cumbersome approach to sequencing non-modular synths.
@taavi you can run practically everything on a pc or iPad. Almost any hardware outside the box will be limited and with less features, and have knobs, and a physical touch and feel and that’s the whole point. If you are happy and creative on a pc or iPad you certainly don’t need any hardware at all and it’s totally cool of course.
On the contrary, real-time tweaking of hardware sequencers along with the interaction of other elements like quantizers, voltage processors etc is much easier than using software. Sometimes i want to control everything from the modular and that includes hardware synths like my Waldorf Quantum without having to go via a computer so something like the ES General CV can then bring in these other sounds sources just like they are another module. Simple algorithms, when combined with other voltage control, can produce evolving rhythms and patterns that are very difficult to do with current software. You could do this with a virtual modular but even with a powerful computer, moderately complex patches can bog down the computer. Hardware is just much easier to "play" but yes, it is a very expensive way of doing things.
@@CuriousDroid I can do any modulation I want on a computer, even output as cv. I have dvelved into modular and found it to be extremely limited and expensive, compared to Pure Data or supercollider, which is free. Only reason I own some modular today is because of sound, and even that can be argued by many. Modular is next Fruity Loops for rich kids. I understand the physical aspect of it though. But many modular setups still use Electrons or some other soundmachine that are essentially physical daws.
I completely disagree. I am heavy into the MIDI world and have been working on MIDI hardware with Arduino. I've been dipping my toes in the modular world via VCV Rack and I'm simply amazed at how much innovation is going on in the sequencing world of modular hardware. Even just the modular nature lends itself to more organic sequencing and controlled randomness. I'm dying for something like the Eloquencer or even something like the Turing Machine to come to MIDI land. Sure I could make a Pure Data patch to do similar things, but having physical hardware with knobs and patch points to intuitively change the controlled randomness is pretty hard to beat.
FYI - Since this video was released, Befaco came out with VCMC - an excellent MIDI controller that's also a CV to MIDI module (and can also act as a standalone controller with a mod for USB power)
The extent of your insights is one thing, but your delivery's concision and clarity is something else. So good!
Since CV to MIDI is relatively scarce, it's worth adding that the original Bass Station Rack has one pair of pitch and gate CV jacks that are bidirectional - you can use them to convert MIDI to CV or CV to MIDI, and they can be used inependently of the actual synth (so you can control the synth itself on one MIDI channel but have the CV i/o running on a different one). Can be set or Hz/volt for interfacing with Korg stuff, too.
There's no conversion to/from CC so it's limited but you do get a pretty nice little 90s analog DCO monosynth with a bunch of preset locations and ploychaining as an added bonus.
Digitone's sequencer, effects and FM poly synth are such a great compliment to euro! I run my intellijel 7U setup and pulsar-23 into it and use DT as my command center for transport, clock and sequencing.
This is so much more, in every respect, than your videos of new gear.
Doepfer A-192-2 and the bastl instruments 1983 poly cv/gate to midi are 2 other ones as well. But the polyend is nice. I like. Thank you again for all your videos. Awesome
Does the ES General CV send out the chords it creates over the external midi?. As far as I can see it mirrors everything that is sent to the midi sound generator but i'm wondering if there is extra processing done to create extra midi notes signals for things like the Shepard tones and if these are sent out too. Basically i want use it as a CV-midi for external synths, I'm not that bothered about the internal sound generator and this seems to have more CV input compared to the Doepfer A-192-2.
I have an ES-8 so i could use that and the silent way CV-midi then out thru Ableton but i was trying to avoid using the computer for this application
The General CV has a setting to enable output of all the internally generated MIDI (e.g. for the chords, Shephard tones etc.) via the breakout.
The CV.OCD box, if you haven't seen it already - MIDI to 4 CV outs and 12 gate/trigger outs! Not a module, it's a self-contained unit.
Thanks - Added to description and gave you credit!
yep, cheap simple but powerful litle box
Also available as a eurorack module as Hexinverter Mutant Brain
Yep - mentioned that in the video - thx
@@time4anew1 cv.ocd as a module? where?
Shuttle Control is also a fantastic module for this purpose. It's outputs can route cc's back to your other hardware gear and the outputs are also configurable in any combo of v/8, gate, trigger, or cc data you want...very handy with digitakt or digitone!
Thanks - added to description and gave you credit
Don't forget about the beautiful Endorphin.es Shuttle control that is extremely flexibel and besides complex midi options can also output white noise, 808 cymbal noise, random voltages etc. on it's many outputs.
Ah just seen that Gregory already talked about it!
Great job! Beginners need to watch this very good explanation.
Did you mention O_c hemispheres suite Captain MIDI is another option for CV>midi>CV?
Thank you. This was helpful as I am a noob to synths and modular and have a steep learning curve ahead . Would be interested in getting your In-Complete Book of Electronic Music Ideas, Tips and Tricks but not financially able to be a patron due to other committments. Perhaps in the near future.
Nice and instructive video as usual, I'm this channel's fan.
3 nice gears wich involve MIDI and CV: Koma komplex sequencer, DSI Pro 2 and Elektron Analog 4
Nice video, just wanted to mention that the Doepfer A-192-2 does CV -> midi conversion as well.
Thanks! Add to the description and gave you credit ;)
Max 8 just came out. I would love a tips and tricks video for that :)
Nice one. Thanks! Especially for reminding that Digitakt has midi cc lfo.😄
Thanks so much for confirming for me that midi LFO can be converted to CV. This is just what I was hoping for! With the DN would you just assign an LFO to, say CC1, then convert CC1 to CV in your midi to CV converter? Does anyone know if CV.OCD can perform this?
the cv resolution is much higher than the 127 steps of a midi cc signal / midi lfo. so it needs some smoothing.
NICE i learned so much from this and i thought i had it down !
I did laugh when you said 'eurorack' and 'clearly labelled' in the same breath
Is there a way to know if the control voltage you are providing is too much voltage? Like could I use the audio signal from my older Moog theremin to be the CV signal (not equipped with CV out)?
Good question, that i would like to know aswell,-
Hi, very nice video ! The best I have seen in this particular field and very helpful to avoid mistakes in building and connecting our synths from two different worlds. I am delighted with the Endorphin.es Shuttle Control, Midi to CV ( 16 channels ) and got presets (16) to launch in the module from a computer (giving a specific role to each one as pitch, gate, tap LFO, Atouch, velocity...) To discover really . But this only one part of the problem isn't ? What about cv to midi ... Philscott
Thanks for the kind words. CV to midi is in the video too
You might want to redo this video. I have a Prophet Rev2 I want to control with eurorack and it looks like there are more options available now. Also the Behringer Neutron has a unipolar LFO output and an attenuator, this works great as an expression pedal controller for most synths
Is it better to connect an arturia keystep with a behringer model d via cv or via midi?
Yes and the reason i like the polyend is for all the outputs. I am looking i to controlling my modular from my mpc live 2 but am having some difficulties. I also have the sl mk3 from novation that i can use. Dont know what to use. I only have 2 separate midi to cv gate mod modules at the moment. That is why that polyend looks like a winner for me. Could you do a deeper dive on it? If you can get some time. Well thank you stay safe
Do you have or know of a tutorial on how to do the MIDI CC to CV LFO that you talk about at 11:10?
Digitakt and Digitone have MIDI LFOs, and you can use a tool like Befaco VCMC to convert it to CV
Thank you!
Great video production! Specially for someone like me who would lije to venture into this hybrid modular set-up! What type of eurorack case are you using?
Thanks! It’s Rackbrute from Arturia - it’s a great starter case
Shouldn’t it be possible to use the midi thru of Digitone in DIN sync mode and then with a midi TRS din adapter plug it directly into Pam’s Workout? That would save you one gate out and potentially gain one more voice channel (e.g. with Yarns).
good question - have you found it out ?
@@MikkelGrumBovin Yes, it works like a charm. You can first adapt the DIN to TRS and then split it into two mono plugs that you can plug into pams clock and start/stop.
@@MikkelGrumBovin Keep in mind that you need to use a clock DIN to TRS adapter like the one Arturia makes
@@chmanie Thats so good thinking, i just got the PEXP-1 - and me.being an olschool bassplayer/guitarist/drummer gone synth/vintage/Euro crazy (i use to play gr300´s and Ibanez Zing in the good ol days aswell)im so deep into the rabbithole , i feel i cant think straight anymore - i love that whole breaking rules, using several sequenzers to trig the same CV lines , polyrythmic tribal triggers , with cross seqv. sounds on the circadian , and triggin perc. with Metropolis - -DivKid and MylarMelodies being my new gurus .... but...i...need...help...both mental and techwise ! ;-)
My Midi'd Monotribe does a decent job of CV to MIDI conversion.
The violent way sounds like fun :)
Yaaassss! And danke for the info.
Great video, as usual, thanks! One question: did you expirience any noticeable latency at midi-cv conversion stage?
Thanks! Not really, but I wasn't looking for it. Generally I've tried quite a few MIDI -> CV setups and haven't experienced noticeable latency
Hey loopop, im tryna get clock from my beatstep pro into ableton link for aum on my ipad to follow... any ideas? Im using an es-9 for my interface and tried audulus, mirack, cvariant apps. I have a disting mk4, dunno if that can help at all (going from clock to midi clock perhaps? I dont have a breakout tho)
never mind, i was overthinking it. I can use midi link sync app to turn BSP midi clock into live sync and Aum wil follow that... I was hoping there was a software option that would take CV and turn it into link str8 up but all efforts failed.
Is anyone sending gate, v/oct and midi lfos from the Digitone through the CV.OCD to end up in modular land? I'm curious at to how you set that up
How can I send my Ableton MIDI clips to different voices in my eurorack? I already have a MIDI to cv interface, but that is just one voice
sadly i think you need more than one MIDI - CV interface to do it. its why polyphony is fairly rare in modulars haha
Cheap one channel CV to MIDI converter. Just want to trigger notes on my Monologue by Mono Station sequencer. Some one, please. I do not want to get rid of my Monologue.
Hello! Could you please go into details how to connect Digitakt and Korg Volca Modular? I am begging you!!! Many thanks!
I don’t have the Volca modular unfortunately
@@loopop well, I can name the in-s and out-s that are available: Volca has a 3.5 mm CV-in, then two 3.5 mm In-sync-Out and a 3.5 mm headphones out
Still a problem to understand what to do =(((
Les Volga then you need some sort of midi to cv converter
@@loopop thanks! guess it's the only way, unluckily
Very nice! I guess I tought myself most of this already, but I have a very special problem. I have a Digitakt that sends the masterclock and stop/start to my eurorack via a HERMOD -> Tempi to a René 2.0 which is the controller. The start / stop works great, but The René doesn‘t jump back to position 1, so the beats are in sync with notes, but not with the notes I want. I know that the René can be told to reset its sequence via a CV at the Mod input, but that means I can‘t use that input for other stuff and I don‘t know if the Hermod can Send a start / stop signal just once ... I only know it can send clocks.
Is there something I am missing?
Thanks! Sorry I don't have a solution off the top of my head :/ it's worth a question on the Hermod forums or to support though.
Hermod can send clock with restart command at start or stop - ->
G1+RESET P to G8+RESET P: Hermod will output a RESET signal on the CV output (together with the clock on the GATE output), helping your modules to keep the sync when PLAY is pressed.
- G1+RESET S to G8+RESET S: Hermod will output a RESET signal on the CV output when STOP is pressed.
@@MachineRoom I wrote that, it‘s just that the René loses options when using one of the input as a reset.
If your case has midi ports it is easy to wire disting to that via dupont cables... Just another possible
KnobFarm Ferry is a better option for interfacing eurorack with everything else, mainly because of stereo send and return.
Thanks for the feedback - added to description and gave you credit
@@loopop thanks, I just shared what I use)
Fedor T it’s awesome I was not familiar with that module
I'm having trouble getting the cv to midi (midi out using the breakout) to work on the General CV. When I hook the breakout to my Disting mk4, both midi in and midi out work fine and I can control my Minibrute using Channel 1. However, when I hook the breakout module to the General CV, Midi in works (external Midi to cv), but I cannot get Midi out to work. I have upgraded to the latest firmware v1.4 and am using the Programmable mode. I set Note A to Channel 1 and triggered. I even set the Midi Out setting to 1. Is there something else that I need to set?
Hey - it’s a bit hard for me to troubleshoot but please email their support - they are very responsive
The Polyend Poly's manual officially says: "Please notice that Poly module Gate outputs are 0-12V (the Eurorack norm is
0-5V)". And then all values are given:
• 8 Gate Outputs (0-12V)
• 8 Pitch Outputs (0-12V,V/oct.)
• 8 Velocity Outputs (0-12V)
• 8 Modulation Outputs (0-12V,selectable CC message 0-127 using
DIP switch on the back panel) Poly Module play modes.
If the Eurorack standard is 0 thru 5 volts, why do they build this thing offside these limits? I have bought it because I've seen youtubers using it on its own within a normal Eurorack. Moreover, the Moog Subsequent 37 is built to Eurorack standard and has 3 CV ins and one gate. Will I destroy it when I connect it to the Poly's outputs?
I'm heavily confused now and have to consider returning it to the vendor... What I wouldn't like at all...
Any suggestions or explanations? Thanks beforehand!
0-5v is a Doepfer standard, not necessarily for all of 5U eurorack modules. There are many modules that take +/-12v, as this is usually the limit of the power supply itself.
Oh I didn't realize this was 2 year old comment haha. Hope this helps someone anyway
@@magnopere
Thanks anyway :)
what is the status of the question/answer today ?
@@MikkelGrumBovin
I remember that I've sent this question to Moog's support team, and I remember that a supporter named Adam told me that I should not try to make such a connection. He literally advised me not to do this. So, this can be considered a well-educated answer: These devices are not compatible.
@@N.A._McBee Thanx , man !
i got my dfam then was sorely disappointed i didnt have anything else to patch it with (except my minilogue to sync with it), still havent settled on what to buy , it becomes a bottomless pit for me , id also want to interface with vcv rack .. so is the expert sleepers module the best-cheapest way to go ? or a midi-cv converter (i wish i kept my ancient one that i sold with my korg mono/poly) i have a weird combo of digitakt/dfam/minilogue (and reason for daw)
Two recommendations: Did you see my "why eurorack is awesome" video? I expand DFAM 5 ways there. And yeah also check out my "hybrid modular" video for using ES-8 or a DC coupled interface to bridge to VCV. ES-8 is the best way to go but it's not cheap :/
@@loopop yeah i need to check them out again to mabye spark some ideas , its been a while , and yeah :( i think i need to hold off a bit more before i go full eurotard .. each time i look into that i get lost deciding on a few modules to fit a 60hp rack or something, then it snowballs into something way bigger :):(
I great video. I have the Intellijel uMidi. Its 6 hp and provides Midi to CV along with a clock divider, sequencer sync via run and reset outputs., 0 -10 vpo, gate and trigger outputs and more. Very powerful in a small package. I also have the Squarp Pyramid which has CV/Gate in/out.
Thanks! added to description and gave you credit
So, what are the chances of getting your soothing voice to break down what Midi 2.0 means for us mere mortals and how - if there's any indication yet - it might be adopted by Eurorack etc, given the limits of CV and the resurgence of old school and analog... It seems Midi 2.0 could be a bridge between worlds but also open up a portal to other dimensions? Sorry to stir the Zombies... perhaps its too early to know?
There's a big chance once we see it actually have a practical implementation. Though I could record myself reading the spec and sell that as a sleeping aid tape :)
+1 for the CV.OCD because it’s very flexible and you can carry it everywhere since it’s independently powered. But an obvious, cheaper option (in the sense that it saves you a dedicated midi to cv converter) is a semi modular with midi (0-coast, Microvolt, Neutron). It would do the trick with the advantage of having another source of sounds and modulation. Yes, it offers less flexibility / control than a dedicated converter but it would cover the critical aspects (tempo/rhythm, pitch, and more). Even cheaper - and, of course, more limited - would be a beatstep. BTW, it would be great if the Medusa had, instead of so many pads (Being keyboard-centered I don’t appreciate them other than as samples/percussion triggers, or as a sequencer interface -like in the superb Circuit design-), a modular matrix. It’d be a killer.
Ta you!!
Doepfer make a cv to midi too.
Yes, A-192. Big, utilitarian, cheap, does the job.
digitone
I do not get it, why would anyone want to sequence ordinary synths with modular? Modular sequencing capabilities are so far very limited, even with modules like O_C, which are also digital. Quite simple algos that run on expensive hardware. Just use a phone, tablet, pc..
Well, it could let you effectively add an extra LFO or envelope to a standalone synth. Trigger from the standalone sent via midi to the modular, which initiates the generation of a CV curve, which can be converted back into midi as a specific CC message, and routed back into the standalone synth to control some parameter, like filter resonance (which rarely gets a dedicated envelope on a synth), pulse width, waveform etc.
EDIT - I realize that my suggestion is for modulation, not sequencing. I think the only reason for that would just be that you happened to already have plenty of modular sequencers, presumably with a sequences that you already built or something. Or just preference of interface. But I agree - modular is a very expensive and cumbersome approach to sequencing non-modular synths.
@taavi you can run practically everything on a pc or iPad. Almost any hardware outside the box will be limited and with less features, and have knobs, and a physical touch and feel and that’s the whole point. If you are happy and creative on a pc or iPad you certainly don’t need any hardware at all and it’s totally cool of course.
On the contrary, real-time tweaking of hardware sequencers along with the interaction of other elements like quantizers, voltage processors etc is much easier than using software. Sometimes i want to control everything from the modular and that includes hardware synths like my Waldorf Quantum without having to go via a computer so something like the ES General CV can then bring in these other sounds sources just like they are another module. Simple algorithms, when combined with other voltage control, can produce evolving rhythms and patterns that are very difficult to do with current software. You could do this with a virtual modular but even with a powerful computer, moderately complex patches can bog down the computer. Hardware is just much easier to "play" but yes, it is a very expensive way of doing things.
@@CuriousDroid I can do any modulation I want on a computer, even output as cv. I have dvelved into modular and found it to be extremely limited and expensive, compared to Pure Data or supercollider, which is free. Only reason I own some modular today is because of sound, and even that can be argued by many. Modular is next Fruity Loops for rich kids. I understand the physical aspect of it though. But many modular setups still use Electrons or some other soundmachine that are essentially physical daws.
I completely disagree. I am heavy into the MIDI world and have been working on MIDI hardware with Arduino. I've been dipping my toes in the modular world via VCV Rack and I'm simply amazed at how much innovation is going on in the sequencing world of modular hardware. Even just the modular nature lends itself to more organic sequencing and controlled randomness. I'm dying for something like the Eloquencer or even something like the Turing Machine to come to MIDI land. Sure I could make a Pure Data patch to do similar things, but having physical hardware with knobs and patch points to intuitively change the controlled randomness is pretty hard to beat.