High Efficiency Deburring Solutions with J.W. Done

We're talking everything deburring with J.W. Done! Come see the ORBITOOL deburring line and find out how you can spend more time making parts and less time deburring with J.W. Done.

[@JTMarlin8]

Good video. This guy seems much more knowledgeable about the industry as a whole than some other product reps.

[@centurialinc]

Best one yet. Nice product good demo.

[@iansandusky417]

Thank you very much for checking it out!

[@Cmtb125]

This is fancy!! I need one!!

[@bobjimenez4464]

This is a good concept. Will there be thru coolant versions of these tools exiting at points around the cutting sphere?

[@nikolaiownz]

I need to look into these. Very cool.

[@jacquespotgieter917]

Very very cool! I can think of a whole lot of burr problems being solved by this in my shop!
Do you have a distributor in South Africa?

[@vorlon123]

Very interesting!
But will it work if threads are close to the intersection?
I'm guessing the protective ring will slide into the thread.

[@JWDoneOrbitool]

Absolutely, we've got lots of customers using these in threaded holes. In most cases the thickness of the disk allows the tool to ride over the threads rather than dropping down in. In an automated / CNC setting, the tool will be programmed to preload against the very last thread, just before the intersection edge.

[@nickj2508]

This thing is cool.

[@AleksejsKrivcenkovs]

Hey! Do you have a representative in Europe?

[@jasonruch3529]

That's genius 👏 🙌 👌!! I definitely could use that! Wonder if 6k is fast enough tho? We have 50cats

[@JWDoneOrbitool]

We generally operate these between 5,000-15,000 RPM. 6k should be sufficient.

[@MRTOMBO]

How well can this tool protect the SHARP EDGE, not just the bore or adjacent surfaces to the edge where the burr is located? We often have a requirement to keep edges crisp and sharp, free of burrs.

[@JWDoneOrbitool]

In a CNC application, we can tailor the ORBITOOL parameters to remove only the burr without generating a radius/edge break. This can be best achieved when paired with proper drill management/burr generation.

[@md8744]

This is just for hand ( manual) deburring right? Not on cnc machine softwares??

[@slicksjobshop]

There is no days off in shop. Specially if you're "The Guy"

[@davidsullivan2404]

Hello, where can one purchase these tools?

[@JWDoneOrbitool]

You can contact us directly for applications assistance, or contact your preferred local tooling supplier.

[@pierrick1705]

wonder how expensive they are

[@iansandusky417]

Less than you’d think - check out their website!

[@pierrick1705]

@@iansandusky417 its specifically because I checked their website that I asked this lol

[@HansenCNC]

Honestly these are great. Bought a few in 2015 and they have made my hydraulic manifold business explode in volume. My sun valve cavities are smoother than butter

[@JWDoneOrbitool]

@@HansenCNC that's great to hear!