Wiring DS controller for Policar set

A VERY basic tutorial about how to wire a DS controller for use on a Policar starter set.
You need:
1. DS Controller-DS-3503D
2. DS-0091 adapter cord
3. Electrical tape
4. something to strip wires
5. about 5 minutes of time
These photos were provided by LEB Hobbies. Buy the parts you need at these links.
DS 35-ohm controller: www.lebhobbies...
DS adapter plug: www.lebhobbies...

[@truesdel]

This modification disables the brake feature. Despite that, it is a stunning improvement over the stock PoliCar controllers. Within minutes of starting to use these DS controllers I was becoming a smoother, more fluid driver. Highly recommended!

[@rrrosadorr]

Thanks Dave! Now I can pick up a pair of high quality controllers for our Policar track! 👍

[@kevinwooldridge8261]

Thanks Dave! Great example of the KISS principle in addition to concise info as always. Take care and best to all the rest 🤠

[@rickwamsley8702]

Great Show

[@josephreber525]

Yes 🎉🎉🎉🎉 thank you Sir👍👍👍😎😎😎

[@lorenzocorradini7556]

Hi Dave, I have the DS 3503E (25 Ohms) controller and an SCP-2 with analogue cartridge.
I would like to know if I can do the same with a Carrera Go+ system (Cut the red plug from the small Carrera Go controller and soldier controller's cables to the red plug's)
Just want to be sure it won't damage the Carrera Go+ box. Are the numbers of Ohms also to take into consideration for this to work / don't damage the box ?