I make art from drink bottles and this is a HUGE improvement to the way I do things. And thanks for saving me the money I was about to spend on a Kickstarter project that's a hand held version of this simple idea. Thank you!!!
I love this idea!! I enjoy finding inexpensive ways to make homemade gifts. Crocheting of the plastic strips anyone could make a purse, bag, comfortable blanket, ect. ..... and the list goes on!
just a suggestion, turn you blade facing the other direction and mount a spool vertically at the other end of the board with a hand crank. then when you pull the plastic through it winds up instead of piling up. great vid, much easier than a lot of the plastic rope cutter vids out there.
thanks... youve got me off the plateau of stale ideas... at least i can do things for university semester one assessments without running into competition with others...
One of the most effective plastic ribbon cutter that I've seen on YT! And certainly simple enough to make. TFS! Really well done tutorial. I actually have no questions how to make this great tool for plastic ribbon making. That blue bottle and the green bottle would be pretty woven together.
There seems to be helluva lot of bottle cutter videos around. What we seem to be missing is videos showing what to actually do with that much of plastic strip.
a tiny one though because the lenght may seems long but a basket requires longer lenght and it's not easy to wield at all two ropes without being it obviously molten, visually
check for "petamentor" if you want to transform this plastic rope into a plastic filament. you'll need a heating element and other parts they tell. most of people who do that use a heating block from a 3D printer parts seller. you'll need to get higher temperature than for PLA, normally you'll find the exact infos on youtube among other sites like thingiverse & stuff. happy printing !
You know the tops with the lid, you left over, well if you pass the top of a plastic bag through, once it's filled it acts as a closing, just screw the lid back on over the plastic bag.
make animal fenceing, three 48 inch long sticks, tie a tripod knot with the tops and plastic rope,cut v notch above knots to keep from sliding off/take bottom of one stick,add two more sticks and make a tripod knot again and cut v notch keep going /use the center stick of each 3 sticks and knot , fold out arms you have fence tripod for a setter post=hammer inn ground
I wouldn't call it a 'rope' - it's just a PET string, which needs to undergo further transformations to become a rope. Name of the video is missleading
imaket it best is easy drill hole on wood that feet you bearings (yeha het some skate bearigs) and washers same size. the bearings of the botthom need to get totaly on wood whit no whashers ad whashers to adjust size then littlel thimwhashers to keep the blade away from the rotation of bearings(like routher bits) ad more bearins at the top and bolt it. ig you are om the serius scrsp rope busines hahaha you migth whant to ad a themsion road for the botle didnt play aroumd and put a wheigth on the top for comfort then use the string to hang people askimg what you gona do whit the string so you can awnser "hang people" sheers
I make art from drink bottles and this is a HUGE improvement to the way I do things. And thanks for saving me the money I was about to spend on a Kickstarter project that's a hand held version of this simple idea. Thank you!!!
I love this idea!! I enjoy finding inexpensive ways to make homemade gifts. Crocheting of the plastic strips anyone could make a purse, bag, comfortable blanket, ect. ..... and the list goes on!
So awesome! Thank you for the clear and easy instructions! One can use it to tie back plants and is quite strong. I'm going to make one tomorrow
Pro Tip: Drill the larger holes first. Keeps you from grabbing the wood and tearing through. plus the bit shape auto-locates the smaller drill.
Best design on u tube
I totaly agree
Great design! I changed it a bit for my needs. Thanks!
very good work but what of if some one want a very thin rope ? Do we have to reduce the level of the blade?
It worked great and momma is happy.
if only I could give you 2 thumb's up, thanks for teaching me
Great instructional video, clear and concise- THANKYOU
Very impressive. Liked how you striped your bottles.
just a suggestion, turn you blade facing the other direction and mount a spool vertically at the other end of the board with a hand crank. then when you pull the plastic through it winds up instead of piling up. great vid, much easier than a lot of the plastic rope cutter vids out there.
Wow that's a great idea to recycle plastic great idea!
It looks cool to watch but can you give us a few ideas of how to make use of these long plastic strips
Watching your videos is chilling me right the heck out, man.
Totally cool best bottle cutter video I seen. Cheers
thanks... youve got me off the plateau of stale ideas... at least i can do things for university semester one assessments without running into competition with others...
Super Superb!! Super Superb!! Super Superb!! Thanks.
great video ...Thanks ! m going to make it soon
Thanks for nice video. I have a question, Can anybody say have any market value for is this rope or ribbon or strings?
do you have a suggestion for a best width of 'rooe' to try for better success?it looks like 1/4 inch
One of the most effective plastic ribbon cutter that I've seen on YT! And certainly simple enough to make. TFS! Really well done tutorial. I actually have no questions how to make this great tool for plastic ribbon making.
That blue bottle and the green bottle would be pretty woven together.
Can someone explain to me how to remove the plastic strips? I have to put the spoon in a different way or how I should do it.
what a creative idea
supper idea i can use some thing like that in my garden tie my plants with
Never thought about that! But its worth a try.Keep it up mate!
Nice idea, but what would we do with rhese strips ?
creative idea bro
There seems to be helluva lot of bottle cutter videos around. What we seem to be missing is videos showing what to actually do with that much of plastic strip.
Very complete thank you
Thank you ❤❤❤
awesome idea, but what is the point, and what are you going to use it for?
for the glory of Satan of course.
hentai nat ofc!
For the zombie apocalypse?
Melissa Caldwell you can sand them down
😂😂😂😂
确实不错，不过有个疑问，弄成这这种细长的塑料带子有什么用处呢？
Wonderful it is thanks for videos
Pliers are not for nuts & bolts; wrenches are. That isn't rope, it's a strip.
What could you use it for?
Great idea
Pretty cool. Can make them thicker to weave a basket? Great idea, Thanks
You can use that to weave a basket.
a tiny one though because the lenght may seems long but a basket requires longer lenght and it's not easy to wield at all two ropes without being it obviously molten, visually
Good job.
What can it be used for? I would be sharp ~ Dose it hold a knot?
This Plastic Bottle Cutter cuts strips at 1 mm ?
very good job think
Mukhtar Hamdani Pakistan
thanks, well explained
nice idea. bravo!
Hola soy Amy. Felicitaciones el mejor vídeo y muy bien explicado. muy fácil. my like for you. saludos.
love this tutorial.
AWESOME!
Thats a awsome idea bro!
+bakagamer i agree
And Can I Just Use Screws Instead Of Bolts? Only Thing I Have Is A Dremel.
Dude! Thank you for this!
amazing video, it could be resumed to less than 2 mins, but amazing anyway
Use wingnuts. +Drill for and insert a dowel rod as long as the smallest (shortest) bottle you will recycle.
you are legend
Please design a survival knife with bottle slicing tool built into the handle under the grips
Hi I have a question how do you make a fine yarn out of plastic?
Plastic filaments can be extruded thinner than a human hair.
fantastic
you need to drill another hole for a longer bolt or dowl rod for the bottle to ride in place.
Thanks
Bravo
Can this be applicable to 3D printing fillament?
check for "petamentor" if you want to transform this plastic rope into a plastic filament. you'll need a heating element and other parts they tell.
most of people who do that use a heating block from a 3D printer parts seller. you'll need to get higher temperature than for PLA, normally you'll find the exact infos on youtube among other sites like thingiverse & stuff.
happy printing !
not really a rope but very cool!
!
does this work with those 5 gallon water bottles?
Yes
that do you need this for?
for the glory of Satan of course.
Hi,
What size are the screws? And nuts?
what editing software did you use for this video?
now u need a video on how to tie knots with that stuff
Heatgun
I need it to be thin enough to crochet scrubby pads for dishes
good
Wouldn't the edges of this plastic ribbon be sharp to handle?
Yes it would be, but you could do a quick thermoform with a blow torch.
me facino la idea
3:03 No no no!!! My eyeeaaghhhahhh!!!! Staaaaahhhhp!!!! Jesus Christ! I'm dyyyyyyyying aaaahhhhggggg!!!!
Cool and imaginative but you dont have a rope but have all those tools? Im not seeing that happen.
How can you tie it tightly?
tie it then hit it with a heat gun, it will shrink
cool
***** that was not a typo. That was a colloquialism. English is my first language.
is allow me copy your video on my channel?
Hi ! Its the best I saw !! Can you create an easy spiral potate cutter please ? rsrsrs thank you!
Nice design, but pliers... to tighten nuts? Are you nuts? Use a spanner ya spanner!
You know the tops with the lid, you left over, well if you pass the top of a plastic bag through, once it's filled it acts as a closing, just screw the lid back on over the plastic bag.
don't forget to do a light pass with a lighter on the edge of plastic freshly cut. do it verygently it will smoothen the edges.
作りやすいな。
D.I.Why ?
cool! :D
Hi, im MrGears attempted double
its a rope ???
make animal fenceing, three 48 inch long sticks, tie a tripod knot with the tops and plastic rope,cut v notch above knots to keep from sliding off/take bottom of one stick,add two more sticks and make a tripod knot again and cut v notch keep going /use the center stick of each 3 sticks and knot , fold out arms you have fence tripod for a setter post=hammer inn ground
oh 'how to make plastic strands ' check out countersink
sorry but that ain't no rope it's ribbon at best
Right. Braid these ribbons to make rope.
that's a string, not a rope
+Hans Nam Very true, i know i would want to ever have to braid that to make cordage lol
not ! Its a strand or ribbon !
Hans Nam
Hans Nam lol
triumphmanful ...and strap
I wouldn't call it a 'rope' - it's just a PET string, which needs to undergo further transformations to become a rope.
Name of the video is missleading
with me the plastic keeps snapping making me maybe able to get 50 centimeter
Plans from the stodoys site perfect for beginners and advanced people will find something for themselves.
legible, simple and quick, just stodoys plans.
very detailed plans for that I found on Stodoys.
trés trés interéssant la ficelle pour le plastique on peut boire et récupérer le fils de la boureille pour allez à la pêche
the bad thing with this "rope" is that you can't tie it... it's plastic and is sliding too mutch...
+Von Malegowski I didn't think of that.... thanks
wait so tie a knot and melt it with a lighter?
jup
Send that Related pdf
oh right
now wat m I supposed to do with a bunch of plastic ropes which I can't even tie . bruh 😠
my vids have better content for sure.
they didn't make a rope! they made a Slinky.. not really😒
Weave them together to make it stronger
imaket it best is easy drill hole on wood that feet you bearings (yeha het some skate bearigs) and washers same size. the bearings of the botthom need to get totaly on wood whit no whashers ad whashers to adjust size then littlel thimwhashers to keep the blade away from the rotation of bearings(like routher bits) ad more bearins at the top and bolt it.
ig you are om the serius scrsp rope busines hahaha you migth whant to ad a themsion road for the botle didnt play aroumd and put a wheigth on the top for comfort
then use the string to hang people askimg what you gona do whit the string so you can awnser "hang people" sheers
WHY
Now Teach Us How To Turn It To Rope Itself
As In Braid It
***** That's What I'm Also Saying (Gonna Use It As Bowline)
***** If Desperation Hits. You Know Ya Gotta Do Something
*****
First. It's 2 Washers Thick
Second. Where Can I Find Some PET Plastic Bottles? I'm In The Phil.
***** Yep.